Acknowledgement
Manuscript receipt and acceptance dates will be inserted here. This research was supported by Korea Electric Power corporation [grant number: R16XA01]. This research was supported by Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Science and ICT (2019R1F1A1063397).
References
- Y. Morishita, T. Ishikawa, I. Yamaguchi, S. Okabe, G. Ueta, and S. Yanabu, "Applications of DC breakers and concepts for superconducting fault-current limiter for a DC distribution network," IEEE Trans. Appl. Supercond., vol. 19, no. 4, 2009, Art. no. 10794822.
- J. Xi, X. Pei, W. Song, B. Xiang, Z. Liu, X. Zeng, "Experimental tests of DC SFCL under low impedance and high impedance fault conditions," IEEE Trans. Appl. Supercond., vol. 31, pp. 5601205, 2021.
- J. Lee and U. Khan, "Impact of SFCL on the four types of HVD circuit breakers by simulation," IEEE Trans. Appl. Supercond., vol. 26, no. 4, 2016, Art. no. 5602606.
- Y Ayachi Amor, G Didier, F Hamoudi, "Application of a novel approach of resistive-type superconducting fault current limiter with a fast protection system in multi-terminal direct current network," International Transactions on Electrical Energy Systems, Aug. 2020.
- H. Y. Lee, M. Asif, K. H. Park, B. W. Lee, "Assessment of appropriate SFCL type considering DC fault interruption in full bridge modular multilevel converter HVDC system," Phys. C Supercond., vol. 563, pp. xxx, 2019.
- J. So, S. Lee, W. S. Kim, J. K. Lee, and K. Choi, "Design of an HTS Fault Current Limiting Module for an MVDC Power Grid," IEEE Trans. Appl. Supercond., vol. 30, no. 4, 2020, Art. no. 5600705.
- H. W. Choi, "A Study on the Current-limiting Type Superconducting DC Circuit Breaker for the Reliability Improvement in HVDC Power System," Ph. D Thesis, Chosun University, August 2019.
- W. C. Kim, "A study on the recovery characteristics of resistive superconducting fault current limiter with respect to various winding types," M. S. Thesis, Yonsei University, February 2010.