Advances in Computational Design

  • 제6권3호
  • /
  • Pages.225-239
  • /
  • 2021
  • /
  • 2383-8477(pISSN)
  • /
  • 2466-0523(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Computing the fracture energy of fiber reinforced cementitious composites using response surface methodology

  • Mazloom, Moosa (Department of Civil Engineering, Shahid Rajaee Teacher Training University) ;
  • Mirzamohammadi, Sajjad (Department of Civil Engineering, Shahid Rajaee Teacher Training University)
  • 투고 : 2021.01.10
  • 심사 : 2021.06.08
  • 발행 : 2021.07.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, some models are developed to predict the fracture energy (GF), flexural strength (ft), splitting tensile strength (fspt), and compressive strength (fc) of fiber reinforced cementitious composites (FRCC) based on I-optimal design of response surface methodology (RSM-I-optimal). Indeed, the main aim of this paper is to predict the mentioned parameters of FRCC at different temperatures and the aspect ratios of fibers. For this purpose, the fracture energy and strength properties of FRCC reinforced with aramid, glass, basalt, and polypropylene (PP) fibers were obtained at 20℃, 100℃ and 300℃ temperatures and were used as experimental values by RSM. The analyses of variance (ANOVA), perturbation, three-dimensional, contour and normal of residual plots were studied to assess the impacts of independent parameters on the relationships. Furthermore, the predictive efficiency of the RSM models between observed and predicted values were examined based on the Nash & Sutcliffe coefficient of efficiency (NSE). In terms of NSE values, the models were exact enough for predicting the flexural, splitting tensile and compressive strengths as well as fracture energy.

키워드

참고문헌

  1. Afzali-Naniz, O. and Mazloom, M. (2018), "Effects of colloidal nano-silica on fresh and hardened properties of self-compacting lightweight concrete", J. Build. Eng., 20, 400-410. https://doi.org/10.1016/j.jobe.2018.08.014.
  2. Afzali-Naniz, O. and Mazloom, M. (2019a), "Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design", Asian J. Civ. Eng., 20, 57-70. https://doi.org/10.1007/s42107-018-0088-2.
  3. Afzali-Naniz, O. and Mazloom, M. (2019b), "Fracture behavior of self-compacting semi-lightweight concrete containing nano-silica", Adv. Struct. Eng., 22(10), 2264-2277. https://doi: 10.1177/1369433219837426.
  4. Al-alaily, H.S. and Hassan, A.A. (2016), "Refined statistical modeling for chloride permeability and strength of concrete containing metakaolin", Construct. Build. Mater., 114, 564-579. https://doi.org/10.1016/j.conbuildmat.2016.03.187.
  5. Aldahdooh, M., Bunnori, M.N. and Megat M.J. (2013), "Evaluation of ultrahigh- performance-fiber reinforced concrete binder content using the response surface method", Mater. Des., 52, 957-965. https://doi.org/10.1016/j.matdes.2013.06.034.
  6. Alsanusi, S. and Bentaher, L. (2015), "Prediction of compressive strength of concrete from early age test result using design of experiments (RSM)", Int. J. Civ. Environ. Struct. Constr. Archit. Eng., 9(12), 1559-1563.
  7. ASTM C1609/M-05 (2006), Standard Test Method for Flexural Performance of Fiber Reinforced Concrete (using Beam with Third-point loading), ASTM International, West Conshohocken Pennsylvania.
  8. Awolusi, T.F., Oke, O.L., Akinkurolere, O.O. and Sojobi, A.O. (2019), "Application of response surface methodology: Predicting and optimizing the properties of concrete containing steel fiber extracted from waste tires with limestone powder as filler", Case Stud. Constr. Mater., 10. https://doi.org/10.1016/j.cscm.2018.e00212.
  9. Balaji, A., Luquman K, M., Nagarajan, P. and Madhavan Pillai, T.M. (2016), "Prediction of response of reinforced concrete frames exposed to fire", Advan. Comput. Des., 1(1), 105-117. http://dx.doi.org/10.12989/acd.2016.1.1.105.
  10. Bayramov, F., Tasdemir, C. and Tasdemir, M.A. (2004), "Optimization of steel fibre reinforced concretes by means of statistical response surface method", Cem. Concrete. Compos., 26(6), 665-675. https://doi.org/10.1016/S0958-9465(03)00161-6.
  11. Bolander, J.E., Choi, S. and Duddukuri, S.R. (2008), "Fracture of fiber-reinforced cement composites: effects of fiber dispersion", Int. J. Fract., 154, 73-86. https://doi.org/10.1007/s10704-008-9269-4.
  12. BS 1881: part 108. (1983b), Method for Making Test Cubes from Fresh Concrete, British Standards.
  13. BS 1881: part 117. (1983a), Method for Determination of Tensile Splitting Strength, British Standards.
  14. Cihan, M.T., Guner, A. and Yuzer N. (2013), "Response surfaces for compressive strength of concrete", Construct. Build. Mater., 40, 763-774. https://doi.org/10.1016/j.conbuildmat.2012.11.048.
  15. Del Coz Diaz, J.J., Garcia-Nieto, P.J., Alvarez-Rabanal, F.P., Alonso-Martinez, M., Dominguez Hernandez, J. and Perez-Bella, J.M. (2014), "The use of response surface methodology to improve the thermal transmittance of lightweight concrete hollow bricks by FEM", Construct. Build. Mater., 52, 331-344. https://doi.org/10.1016/j.conbuildmat.2013.11.056.
  16. Desai, K.M., Survase, S.A., Saudagar, P.S., Lele, S.S. and Singhal, R.S. (2008), "Comparison of artificial neural network ANN and response surface methodology in fermentation media optimization: Case study of fermentative production of scleroglucan", Biochem. Eng. J., 41(3), 266-273. https://doi.org/10.1016/j.bej.2008.05.009.
  17. Esat Alyamac, K. and Ghafari, E. (2017), "Development of eco-efficient self-compacting concrete with waste marble powder using the response surface method", J. Cleaner Prod., 144, 192-202. https://doi.org/10.1016/j.jclepro.2016.12.156.
  18. Esfahanian, M., Nikzad, M., Najafpour, G. and Ghoreyshi, A. (2013), "Modeling and optimization of ethanol fermentation using Saccharomyces cerevisiae: Response surface methodology and artificial neural network", Chem. Ind. Chem. Eng. Q., 19, 241-252. https://doi.org/10.2298/CICEQ120210058E.
  19. Hillerborg, A. (1985), "The theoretical basis of a method to determine the fracture energy GF of concrete", Mater. Struct., 18(4), 291-296. https://doi.org/10.1007/BF02472919
  20. Jimma, B.E. and Rangaraju, P.R. (2015), "Chemical admixtures dose optimization in pervious concrete paste selection-A statistical approach", Constr. Build. Mater., 101, 1047-1058. https://doi.org/10.1016/j.conbuildmat.2015.10.003.
  21. Jo, M., Soto, L., Arocho, M., St John, J. and Hwang, S. (2015), "Optimum mix design of fly ash geopolymer paste and its use in pervious concrete for removal of fecal coliforms and phosphorus in water", Construct. Build. Mater., 93, 1097-1104. https://doi.org/10.1016/j.conbuildmat.2015.05.034.
  22. Karamloo, M. and Mazloom, M. (2018), "An efficient algorithm for scaling problem of notched beam specimens with various notch to depth ratios", Comput. Concr., 22(1), 39-51. http://dx.doi.org/10.12989/cac.2018.22.1.039.
  23. Karamloo, M., Mazloom, M. and Payganeh, G. (2016), "Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete", Constr. Build. Mater., 123, 508-515. https://doi.org/10.1016/j.conbuildmat.2016.07.061.
  24. Karamloo, M., Mazloom, M. and Payganeh, G. (2017), "Effect of size on nominal strength of selfcompacting lightweight concrete and self-compacting normal weight concrete: A stress-based approach", Mater. Today Commun., 13, 36-45. https://doi.org/10.1016/j.mtcomm.2017.08.002.
  25. Kaveh, A. and Bakhshpoori, T. (2016), "An efficient multi-objective cuckoo search algorithm for design optimization", Advan. Comput. Des., 1(1), 87-103. http://dx.doi.org/10.12989/acd.2016.1.1.087.
  26. Kaveh, A. and Rezaei, M. (2016), "Topology and geometry optimization of different types of domes using ECBO", Advan. Comput. Des., 1(1), 1-25. http://dx.doi.org/10.12989/acd.2016.1.1.001.
  27. Khayat, K., Ghezal, A. and Hadriche, M. (2000), "Utility of statistical models in proportioning self-consolidating concrete", Mater. Struct., 33(5), 338-344. https://doi.org/10.1007/BF02479705.
  28. Li, V.C. (1998), "Engineered Cementitious Composites - Tailored Composites Through Micromechanical Modeling Fiber Reinforced Concrete: Present and the Future edited by Banthia, N. in Fiber Reinforced Concrete", Canadian Soc. Civil Eng., 64-97. http://hdl.handle.net/2027.42/84667.
  29. Li, V.C. (2000), "Strategies for high performance fiber reinforced cementitious composites development", Proceedings of International Workshop on Advances in Fiber Reinforced Concrete, Bergamo, Italy, 93-98. http://hdl.handle.net/2027.42/84792.
  30. Li, V.C. (2003), "On engineered cementitious composites (ECC) -a review of the material and its applications", Advan. Concrete, 1(3), 215-230. https://doi.org/10.3151/jact.1.215
  31. Li, V.C. (2008), "Durability of mechanically loaded engineered cementitious composites under highly alkaline environments", Cement Concrete. Compos., 30, 72-81. https://doi.org/10.1016/j.cemconcomp.2007.09.004.
  32. Li, V.C. (2012), "Tailoring ECC for Special Attributes", Int. J. Concrete Struct. Mater., 6, 135-144. https://doi.org/10.1007/s40069-012-0018-8.
  33. Li, V.C., Wu, C., Wang, S. and Ogawa, A. (2002), "Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composites (PVA-ECC)", ACI Mater., 99(5), 463-472. http://hdl.handle.net/2027.42/84693.
  34. Li, V.C., Wu, H.C., Maalej, M.D. and Mishra, D. (1996), "Tensile behavior of cement-based composite with random discontinuous steel fibers", J. Amer. Ceram. Soc., 79, 74-78. https://doi.org/10.1111/j.1151-2916.1996.tb07882.x.
  35. Maalej, M., Quek, S.T. and Zhang, J. (2005), "Behavior of hybrid-fiber engineered cementitious composites subjected to dynamic tensile loading and projectile impact", J. Mater. Civ. Eng., 17, 143-152. https://doi.org/10.1061/(ASCE)0899-1561(2005)17:2(143)
  36. Mandal, A. and Roy, P. (2006), "Modeling the compressive strength of molasses-cement sand system using design of experiments and back propagation neural network", J. Mater. Process. Technol., 180,167-173. https://doi.org/10.1016/j.jmatprotec.2006.05.017.
  37. Mazloom, M. (2008), "Estimating long-term creep and shrinkage of high-strength concrete", Cement Concrete Compos., 30(4), 316-326. https://doi.org/10.1016/j.cemconcomp.2007.09.006.
  38. Mazloom, M. and Karamloo, M. (2019), "Critical crack-tip opening displacement of SCLC", Malaysia, 135-143. https://doi.org/10.1007/978-981-10-8016-6_11.
  39. Mazloom, M. and Mahboubi, F. (2017), "Evaluating the settlement of lightweight coarse aggregate in self-compacting lightweight concrete", Comput, Concrete, 19(2), 203-210. https://doi.org/10.12989/cac.2017.19.2.203.
  40. Mazloom, M. and Miri, M.S. (2017), "Interaction of magnetic water, silica fume and superplasticizer on fresh and hardened properties of concrete", Advan. Concrete. Construct, 5(2), 87-99. https://doi.org/10.12989/acc.2017.5.2.087.
  41. Mazloom, M. and Mirzamohammadi, S. (2019), "Thermal effects on the mechanical properties of cement mortars reinforced with aramid, glass, basalt and polypropylene fibers", Advan. Mater. Res., 8(2), 137-154. http://dx.doi.org/10.12989/amr.2019.8.2.137.
  42. Mazloom, M. and Mirzamohammadi, S. (2020), "Fracture of fibre-reinforced cementitious composites after exposure to elevated temperatures", Mag. Concrete Res., https://doi.org/10.1680/jmacr.19.00401.
  43. Mazloom, M. and Ranjbar, A. (2010), "Relation between the workability and strength of self-compacting concrete", The 35th Conference on our World in Concrete & Structures., Singapore, 315-322.
  44. Mazloom, M. and Yoosefi, M.M. (2013), "Predicting the indirect tensile strength of self compacting concrete using artificial neural networks", Comput. Concrete, 12(3), 285-301. https://doi.org/10.12989/cac.2013.12.3.285.
  45. Mazloom, M., Allahabadi, A. and Karamloo, M. (2017), "Effect of silica fume and polyepoxide-based polymer on electrical resistivity", Advan. Concrete Construct., 5(6), 587-611. https://doi.org/10.12989/acc.2017.5.6.587.
  46. Mazloom, M., Homayooni, S.M. and Miri, S.M. (2018a), "Effect of rock flour type on rheology and strength of self-compacting lightweight concrete", Comput. Concrete, 21(2), 199-207. https://doi.org/10.12989/cac.2018.21.2.199.
  47. Mazloom, M., Pourhaji, P., Shahveisi, M., and Jafari, S.H. (2019), "Studying the Park-Ang damage index of reinforced concrete structures based on equivalent sinusoidal waves", Struct. Eng. Mech., 72(1), 845-859. http://doi: 10.12989/sem.2019.72.1.083.
  48. Mazloom, M., Ramezanianpour, A.A. and Brooks J.J. (2004), "Effect of silica fume on mechanical properties of high-strength concrete". Cement Concrete Compos., 26(1), 347-357. https://doi.org/10.1016/S0958-9465(03)00017-9.
  49. Mazloom, M., Saffari, A. and Mehrvand, M. (2015), "Compressive, shear and torsional strength of beams made of self-compacting concrete", Comput. Concrete, 15(6), 935-950. https://doi.org/10.12989/cac.2015.15.6.935.
  50. Mazloom, M., Soltani, A., Karamloo, M., Hasanloo, A. and Ranjbar, A. (2018b), "Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete", Advan. Mater. Res., 7(1), 407-434. https://doi.org/10.12989/amr.2018.7.1.045.
  51. Mechtcherine, V., Andrade, F.De., Muller, S.P., Jun, P., Dias, R. and Filho, T. (2012), "Coupled strain rate and temperature effects on the tensile behavior of strain-hardening cement-based composites (SHCC) with PVA fibers", Cement Concrete Res., 42, 1417-1427. https://doi.org/10.1016/j.cemconres.2012.08.011.
  52. Mo, K.H., Loh, Z.P. and Tan, C.G., Alengaram, U.J. and Yap, S.P. (2018), "Behavior of fiber-reinforced cementitious composite containing high-volume fly ash at elevated temperatures", Sadha., 43(11). https://doi.org/10.1007/s12046-018-0937-4.
  53. Mohammed, B.S., Fang, O.C., Hossain, K.M.A and Lachemi, M. (2012), "Mix proportioning of concrete containing paper mill residuals using response surface methodology", Construct. Build. Mater., 35, 63-68. https://doi.org/10.1016/j.conbuildmat.2012.02.050.
  54. Mohammed, B.S., Khed, V.C. and FadhilNuruddin, M. (2018), "Rubbercrete mixture optimization using response surface methodology", J. Cleaner Prod., 171, 1605-1621. https://doi.org/10.1016/j.jclepro.2017.10.102.
  55. Morsy, M.S., Abbas, H. and Alsayed, S.H. (2012), "Behavior of blended cement mortars containing nanometakaolin at elevated temperatures", Construct. Build. Mater., 35, 900-905. https://doi.org/10.1016/j.conbuildmat.2012.04.099.
  56. Murray, C.A., Snyder, K.S. and Marion, B.A. (2014), "Characterization of permeable pavement materials based on recycled rubber and chitosan", Construct. Build. Mater., 69, 221-231. https://doi.org/10.1016/j.conbuildmat.2014.07.047.
  57. Nambiar, E.K. and Ramamurthy, K. (2006), "Models relating mixture composition to the density and strength of foam concrete using response surface methodology", Cement Concrete Compos., 28, 752-760. https://doi.org/10.1016/j.cemconcomp.2006.06.001.
  58. Nassar, A.I., Thom, N. and Parry, T. (2016), "Optimizing the mix design of cold bitumen emulsion mixtures using response surface methodology", Construct. Build. Mater., 104, 216-229. https://doi.org/10.1016/j.conbuildmat.2015.12.073.
  59. Nikbin, I.M., Davoodi, M.R., Fallahnejad, H. and Rahimi, S. (2016), "Influence of mineral powder content on the fracture behaviors and ductility of self-compacting concrete", J. Mater. Civ. Eng., 28(3). https://doi.org/10.1061/(ASCE)MT.1943-5533.0001404.
  60. Rezaifar, O., Hasanzadeh, M. and Gholhaki, M. (2016), "Concrete made with hybrid blends of crumb rubber and metakaolin: Optimization using Response Surface Method", Construct. Build. Mater., 123, 59-68. https://doi.org/10.1016/j.conbuildmat.2016.06.047.
  61. Ritter, A. and Munoz-Carpena, R. (2013), "Performance evaluation of hydrological models: statistical significance for reducing subjectivity in goodness-of-fit assessments", J. Hydrol., 480, 33-45. https://doi.org/10.1016/j.jhydrol.2012.12.004.
  62. Rostamiyan, Y., Fereidoon, A., Mashhadzadeh, A.H., RezaeiAshtiyani, M. and Salmankhani, A. (2015), "Using response surface methodology for modeling and optimizing tensile and impact strength properties of fiber orientated quaternary hybrid nano composite", Compos: Part B., 69, 304-316. https://doi.org/10.1016/j.compositesb.2014.09.031.
  63. Sahmaran, M. and Li, V.C. (2007), "De-icing salt scaling resistance of mechanically loaded engineered cementitious composites", Cement Concrete Res., 37, 1035-1046. https://doi.org/10.1016/j.cemconres.2007.04.001.
  64. Sahmaran, M., Lachemi, M. and Li, V.C. (2010), "Assessing Mechanical Properties and Microstructure of Fire-Damaged Engineered Cementitious Composites", ACI Mater., 107(3), 297-304. https://doi.org/10.14359/51663759.
  65. Sahmaran, M., Ozbay, E., Yucel, H.E., Lachemi, M. and Li, V.C. (2011), "Effect of fly ash and PVA fiber on microstructural damage and residual properties of engineered cementitious composites exposed to high temperatures", J. Mater. Civ. Eng., 23, 1735-1745. https://doi/10.1061/%28ASCE%29MT.1943-5533.0000335.
  66. Salehi, H. and Mazloom, M. (2018), "Effect of magnetic-field intensity on fracture behaviors of selfcompacting lightweight concrete", Mag. Concrete Res., 71(13), 665-679. https://doi.org/10.1680/jmacr.17.00418.
  67. Salehi, H. and Mazloom, M. (2019a), "Opposite effects of ground granulated blast-furnace slag and silica fume on the fracture behavior of self-compacting lightweight concrete", Construct. Build. Mater., 222, 622-632. https://doi.org/10.1016/j.conbuildmat.2019.06.183.
  68. Salehi, H. and Mazloom, M. (2019b), "An experimental investigation on fracture parameters and brittleness of self-compacting lightweight concrete containing magnetic field treated water", Arch. Civil Mech. Eng., 19, 803-819. https://doi.org/10.1016/j.acme.2018.10.008.
  69. Sandeep, M.S., Nagarajan, P., Shashikala, A.P. and Habeeb, S.A. (2016), "Determination of strut efficiency factor for concrete deep beams with and without fiber", Advan. Comput. Des., 1(3), 253-264. http://dx.doi.org/10.12989/acd.2016.1.3.253.
  70. Simsek, B., Uygunoglub, T., Korucua, H.M. and Kocakerim, M.M. (2018), "Analysis of the effects of dioctyl terephthalate obtained from polyethylene terephthalate wastes on concrete mortar: A response surface methodology-based desirability function approach application", J. Cleaner Prod., 170, 437-445. https://doi.org/10.1016/j.jclepro.2017.09.176.
  71. Tyagi, M., Rana, A., Kumari, S. and Jagadevan, S. (2018), "Adsorptive removal of cyanide from coke oven wastewater onto zero-valent iron: Optimization through response surface methodology, isotherm and kinetic studies", J. Cleaner Prod., 178, 398-407. https://doi.org/10.1016/j.jclepro.2018.01.016
  72. Varughese, J.A. and Nikithan, S. (2016), "Seismic behavior of concrete gravity dams", Advan. Comput. Des., 1(2), 195-206. http://dx.doi.org/10.12989/acd.2016.1.2.195.
  73. Yang, E. and Li, V.C. (2010), "Strain-hardening fiber cement optimization and component tailoring by means of a micromechanical model", Constr. Build. Mater., 24, 130-139. https://doi.org/10.1016/j.conbuildmat.2007.05.014.
  74. Yang, E.H., Sahmaran, M., Yang, Y. and Li, V.C. (2009), "Rheo- logical control in production of engineered cementitious composites", ACI Mater., 106(4), 357-366.
  75. Yu, J., Lin, J., Zhang, Z. and Li, V.C. (2015), "Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures", Construct. Build. Mater., 99, 82-89. https://doi.org/10.1016/j.conbuildmat.2015.09.002.
  76. Yu, J., Weng, W. and Yu, K. (2014), "Effect of different cooling regimes on the mechanical properties of cementitious composites subjected to high temperatures", https://doi.org/10.1155/2014/289213.
  77. Zhang, J., Wang, Z., Ju, X. and Shi, Z. (2014), "Simulation of flexural performance of layered ECC-concrete composite beam with fracture mechanics model", Eng. Fract. Mech., https://doi.org/10.1016/j.engfracmech.2014.08.016.
  78. Zhang, Y., Liu, Z. and Yao, L. (2019), "Mechanical properties of high-ductility cementitious composites with methyl silicone oil", Mag. Concrete Res., 1-10. https://doi.org/10.1680/jmacr.18.00192.
  79. Zhu, Z. and Gu, D. (2016), "Formulation design of chloride-free cement additive by response surface methodology", Advan. Comput. Des., 1(1), 27-35. http://dx.doi.org/10.12989/acd.2016.1.1.027.