Acknowledgement
본 논문은 한국생산기술연구원 기관주요사업 "제품생산 유연성 확보를 위한 뿌리공정기술 개발(KITECH EO-21-0008)"의 지원으로 수행한 연구입니다.
References
- C. Kanchanomai, Y. Miyashita and Y. Mutoh, "Low cycle fatigue behavior and mechanisms of a eutectic Sn-Pb solder 63Sn/37Pb", Int. J. Fatigue, 24, 671 (2002). https://doi.org/10.1016/S0142-1123(01)00186-4
- A. Sharif, Y. C. Chan and R. A. Islam, "Effect of volume in interfacial reaction between eutectic Sn-Pb solder and Cu metallization in microelectronic packaging", Mater. Sci. Eng., B106, 120 (2004).
- Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS), The European Parliament and of the Council of the European Union, Jan. (2003).
- K. S. Kim, S. H. Huh and K. Suganuma, "Effects of intermetallic compounds on properties of Sn-Ag-Cu lead-free soldered joints", J. Alloys Compd., 352, 226 (2003). https://doi.org/10.1016/S0925-8388(02)01166-0
- S. Choi, T. R. Bieler, J. P. Lucas and K. N. Subramanian, "Characterization of the Growth of Intermetallic Interfacial Layers of Sn-Ag and Sn-Pb Eutectic Solders and Their Composite Solders on Cu Substrate During Isothermal Long-Term Aging", J. Electron. Mater., 28(11), 1209 (1999). https://doi.org/10.1007/s11664-999-0159-y
- J. W. Yoon, S. W. Kim, J. M. Koo, D. G. Kim and S. B. Jung, "Reliability Investigation and Interfacial Reaction of BallGrid-Array Packages Using the Lead-Free Sn-Cu Solder", J. Electron. Mater., 33(10), 1190 (2004). https://doi.org/10.1007/s11664-004-0122-x
- H. Mavoori, J. Chin, S. Vaynman, B. Moran, L. Keer and M. Fine, "Creep, Stress Relaxation, and Plastic Deformation in Sn-Ag and Sn-Zn Eutectic Solders", J. Electron. Mater., 26(7), 783 (1997). https://doi.org/10.1007/s11664-997-0252-z
- R. Mahmudi, A. R. Geranmayeh, S. R. Mahmoodi and A. Khalatbari, "Room-temperature indentation creep of lead-free Sn-Bi solder alloys", J. Mater. Sci.: Mater. Electron, 18, 1071 (2007).
- J. W. Yoon, Y. H. Lee, D. G. Kim, H. B. Kang, S. J. Suh, C. W. Yang, C. B. Lee, J. M. Jung, C. S. Yoo and S. B. Jung, "Intermetallic compound layer growth at the interface between Sn-Cu-Ni solder and Cu substrate", J. Alloys Compd., 381, 151 (2004). https://doi.org/10.1016/j.jallcom.2004.03.076
- T. Plookphol, S. Wisutmethangoon and S. Gonsrang, "Influence of process parameters on SAC305 lead-free solder powder produced by centrifugal atomization", Powder Technol., 214, 506 (2011). https://doi.org/10.1016/j.powtec.2011.09.015
- H. P. Shin, B. W. Ahn, J. H. Ahn, J. G. Lee, K. S. Kim, D. H. Kim and S. B. Jung, "Interfacial Reaction and Joint Strength of the Sn-58Bi Solder Paste with ENIG Surface Finished Substrate(in korean)", J. Microelectron. Packag. Soc., 30(5), 458 (2012).
- J. H. Kim, Y. C. Lee, S. M. Lee and S. B. Jung, "Effect of surface finishes on electromigration reliability in eutectic Sn- 58Bi solder joints", Microelectron. Eng., 120, 77 (2014). https://doi.org/10.1016/j.mee.2013.12.006
- W. R. Myung, Y. Kim and S. B. Jung, "Mechanical property of the epoxy-contained Sn-58Bi solder with OSP surface finish", J. Alloys Compd., 615, S411 (2014). https://doi.org/10.1016/j.jallcom.2014.01.078
- X. Chen, F. Xue, J. Zhou and Y. Yao, "Effect of In on microstructure, thermodynamic characteristic and mechanical properties of Sn-Bi based lead-free solder", J. Alloys Compd., 633, 377 (2015). https://doi.org/10.1016/j.jallcom.2015.01.219
- O. Mokhtari and H. Nishikawa, "Effects of In and Ni Addition on Microstructure of Sn-58Bi Solder Joint", J. Electron. Mater., 43(11), 4158 (2014). https://doi.org/10.1007/s11664-014-3359-z
- L. Jiang and N. Chawla, "Mechanical properties of Cu6Sn5 intermetallic by micropillar compression testing", Scr. Mater., 63, 480 (2010). https://doi.org/10.1016/j.scriptamat.2010.05.009
- K. S. Choi, J. Joo, K. S. Jang, G. M. Choi, H. G. Yun, S. H. Moon and Y. S. Eom, "Laser-Assisted Bonding (LAB), Its Bonding Materials, and Their Applications(in korean)", J. Welding and Joining, 38(2), 138 (2020).
- S. J. Hwang, H. J. Kang, J. O. Kim and J. P. Jung, "Laser Micro-Joining and Soldering(in korean)", J. Microelectron. Packag. Soc., 26(3), 7 (2019).
- S. J. Hwang, S. V. Hwang and J. P. Jung, "Laser Micro Soldering and Soldering Factors(in korean)", J. Microelectron. Packag. Soc., 27(3), 1 (2020). https://doi.org/10.6117/KMEPS.2020.27.3.001
- J. Joo, Y. S. Eom, K. S. Jang, G. M. Choi and K. S. Choi, "Development of bonding process for flexible devices with fine-pitch interconnection using Anisotropic Solder Paste and Laser-Assisted Bonding Technology", 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), 1309 (2020).
- H. S. Joo, K. D. Min, C. J. Lee, B. U. Hwang and S. B. Lee, "Growth kinetics of intermetallic compound layers at the interface during laser-assisted bonding depending on surface finish", 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), 1916 (2020).
- J. Kim, W. R. Myung and S. B. Jung, "Effect of Aging treatment and Epoxy on Bonding Strength of Sn-58Bi solder and OSP-finished PCB(in korean)", J. Microelectron. Packag. Soc., 21(4), 97 (2014). https://doi.org/10.6117/kmeps.2014.21.4.097
- M. Onishi and H. Fujibuchi, "Reaction-Diffusion in the CuSn System", J. Japan Inst. Merals., 16, 9 (1975).