Acknowledgement
This study was a research project conducted by the Ministry of Trade, Industry and Energy and supported by the Korea Energy Technology Evaluation Institute (KETEP) as an energy technology development project (No. 202000580002, No. 20200502001).
References
- J. Q. Li, N. S. Myoung, J. T. Kwon, S. J. Jang, and T. Lee, "A study on the prediction of the temperature and mass of hydrogen gas inside a tank during fast filling process", Energies, Vol. 13, No. 23, 2020, pp. 6428, doi: https://doi.org/10.3390/en13236428.
- T. H. Lee, B. W. Kang, E. W. Lee, J. B. Chung, and S. J. Hong, "The study to find causes for measuring differences of hydrogen fillings in hydrogen refueling station", Trans Korean Hydrogen New Energy Soc, Vol. 29, No. 1, 2018, pp. 32-40, doi: https://doi.org/10.7316/KHNES.2018.29.1.32.
- J. Q. LI, N. S. Myoung, J. T. Kwon, S. J. Jang, T. Lee, and Y. H. Lee, "A theoretical analysis of temperature rise of hydrogen in high-pressure storage cylinder during fast filling process", Advances in Mechanical Engineering, Vol. 12, No. 12, 2020, pp. 1-10, doi: https://doi.org/10.1177/1687814020971920.
- G. Wang, J. Zhou, S. Hu, S. Dong, and P. Wei, "Investigations of filling mass with the dependence of heat transfer during fast filling of hydrogen cylinders", Int. J. Hydrogen Energy, Vol. 39, No. 9, 2014, pp. 4380-4388, doi: https://doi.org/10.1016/j.ijhydene.2013.12.189.
- M. Hosseini, I. Dincer, G. F. Naterer, and M. A. Rosen, "Thermodynamic analysis of filling compressed gaseous hydrogen storage tanks", Int. J. Hydrogen Energy, Vol. 37, No. 6, 2012, pp. 5063-5071, doi: https://doi.org/10.1016/j.ijhydene.2011.12.047.
- M. Monde, P. Woodfield, T. Takano, and M. Kosaka, "Estimation of temperature change in practical hydrogen pressure tanks being filled at high pressures of 35 and 70 MPa", Int. J. Hydrogen Energy, Vol. 37, No. 7, 2012, pp. 5723-5734, doi: https://doi.org/10.1016/j.ijhydene.2011.12.136.
- Y. Zhao, G. Liu, Y. Liu, J. Zheng, Y. Chen, L. Zhao, and Y. He, "Numerical study on fast filling of 70 MPa type III cylinder for hydrogen vehicle", Int. J. Hydrogen Energy, Vol. 37, No. 22, 2012, pp. 17517-17522, doi: https://doi.org/10.1016/j.ijhydene.2012.03.046.
- J. C. Yang, "A thermodynamic analysis of refueling of a hydrogen tank", Int. J. Hydrogen Energy, Vol. 34, No. 16, 2009, pp. 6712-6721, doi: https://doi.org/10.1016/j.ijhydene.2009.06.015.
- J. Xiao, P. Benard, and R. Chahine, "Estimation of final hydrogen temperature from refueling parameters", Int. J. Hydrogen Energy, Vol. 42, No. 11, 2017, pp. 7521-7528, doi: https://doi.org/10.1016/j.ijhydene.2016.05.213.
- J. Liu, S. Zheng, Z. Zhang, J. Zheng, and Y. Zhao, "Numerical study on the fast filling of on-bus gaseous hydrogen storage cylinder", Int. J. Hydrogen Energy, Vol. 45, No. 15, 2020, pp. 9241-9251, doi: https://doi.org/10.1016/j.ijhydene.2020.01.033.
- T. H. Lee, M. J. Kim, and J. K. Park, "Experimental and numerical study on the hydrogen refueling process", Trans Korean Hydrogen New Energy Soc, Vol. 18, No. 3, 2007, pp 342-347. Retrieved from http://www.koreascience.or.kr/article/JAKO200721036737514.page.
- T. H. Lee, T. W. Kim, T. S. Park, Y. J. Kang, and J. H. Noh, "Compact heat exchanger design for biogas application", Trans Korean Hydrogen New Energy Soc, Vol. 25, No. 2, 2014, pp. 183-190, doi: https://doi.org/10.7316/KHNES.2014.25.2.183.
- J. Q. Li, J. C. Li, K. Park, S. J. Jang, and J. T. Kwon, "An analysis on the compressed hydrogen storage system for the fast-filling process of hydrogen gas at the pressure of 82 MPa", Energies, Vol. 14, No. 9, 2021, pp. 2635, doi: https://doi.org/10.3390/en14092635.
- B. H. Song, N. S. Myoung, S. J. Jang, and J. T. Kwon, "Hydrogen compressor cycle analysis for the operating pressure of 50 MPa and high charging capacity", Korea Academy Industrial Cooperation Society, Vol. 21, No. 2, 2020, pp. 66-73, doi: http://doi.org/10.5762/KAIS.2020.21.2.66.
- T. Bourgeois, F. Ammouri, M. Weber, and C. Knapik, "Evaluating the temperature inside a tank during a filling with highly-pressurized gas", Int. J. Hydrogen Energy, Vol. 40, No. 35, 2015, pp. 11748-11755, doi: http://doi.org/10.1016/j.ijhydene.2015.01.096.
- Y. Kim, D. H. Shin, J. S. Kim, Y. Moon, J. Heo, and J. Lee, "Flow boiling heat transfer characteristics on sintered microporous surfaces in a mini-channel", Trans Korean Hydrogen New Energy Soc, Vol. 29, No. 1, 2018, pp. 105-110, doi: https://doi.org/10.7316/KHNES.2018.29.1.105.
- D. Melideo, D. Baraldi, B. Acosta-Iborra, R. Ortiz Cebolla, and P. Moretto, "CFD simulations of filling and emptying of hydrogen tanks", Int. J. Hydrogen Energy, Vol. 42, No. 11, 2017, pp. 7304-7313, doi: http://doi.org/10.1016/j.ijhydene.2016.05.262.
- S. Deng, J. Xiao, P. Benard, and R. Chahine, "Determining correlations between final hydrogen temperature and refueling parameters from experimental and numerical data", Int. J. Hydrogen Energy, Vol. 45, No. 39, 2020, doi: http://doi.org/10.1016/j.ijhydene.2019.12.225.