Transactions of the Korean hydrogen and new energy society (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Fall Impact Analysis of Type 4 Composite Pressure Vessels Using SPH Techniques

SPH 기법을 활용한 Type 4 복합재료 압력용기 낙하 충격 해석

  • SONG, GWINAM (Department of Mechanical Engineering, Gachon University) ;
  • KIM, HANSANG (Department of Mechanical Engineering, Gachon University)
  • 송귀남 (가천대학교 기계공학과) ;
  • 김한상 (가천대학교 기계공학과)
  • Received : 2021.05.30
  • Accepted : 2021.06.25
  • Published : 2021.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The drop impact analysis was carried out on Type 4 pressure containers, and the degree of damage to the falling environment was predicted and determined using smoothed particle hydrodynamics (SPH) techniques. The purpose of the design and the optimization process of the winding pattern of the pressure vessel of the composite material is to verify the safety of the container in actual use. Finally, an interpretation process that can be implemented in accordance with domestic test standards can be established to reduce the cost of testing and containers through pre-test interpretation. The research on the fall analysis of pressure vessels of composite materials was conducted using Abaqus, and optimization was conducted using ISIGHT. As a result, the safety of composite pressure vessels in the falling environment was verified.

Keywords

Acknowledgement

본 연구는 산업 통상 자원부(MOTIE)와 한국 에너지 기술 평가원(KETEP)의 지원을 받아 연구한 과제이다(NO. 20194030202440), (NO. 20203010040010).

References

  1. Composite Materials Handbook-17 (CMH-17), "Composite materials handbook volume 3. Polymer matrix composites materials usage, design, and analysis", SAE International on behalf of CMH-17, a Division of Wichita State University, USA, 2012.
  2. S. Koussios, "Filament winding: a unified approach", DUP Science, Netherlands, 2004.
  3. T. H. Lim, J. I. Byun, M. S. Cho, and H. S. KIM, "Design and structural analysis of Type 4 composite pressure vessel fitted in spare tire well", Trans Korean Hydrogen New Energy Soc, Vol. 29, No. 5, 2018, pp.570-577, doi: https://doi.org/10.7316/KHNES.2018.29.6.570.
  4. V. Alcantar, S. M. Aceves, E. Ledesma, S. Ledesma, and E.Aguilera, "Optimization of Type 4 composite pressure vessels using genetic algorithms and simulated annealing", Int. J. Hydrogen Energy, Vol. 42, No. 24, 2017, pp. 15770-15781, doi: https://doi.org/10.1016/j.ijhydene.2017.03.032.
  5. I. M. Daniel and O. Ishai, "Engineering mechanics of composite materials", Oxford University Press, United Kingdom, 1994.
  6. A. Onder, O. Sayman, T. Dogan, and N. Tarakcioglu, "Burst failure load of composite pressure vessels", Composite Structures, Vol. 89, No. 1, 2009, pp. 159-166, doi: https://doi.org/10.1016/j.compstruct.2008.06.021.
  7. C. S. Lee and J. M. Lee, "A study on the evaluation of fiber and matrix failures for laminated composites using hashin.puck failure criteria", Journal of the Society of Naval Architects of Korea, Vol. 52, No. 2, 2015, pp. 143-152, doi: https://doi.org/10.3744/SNAK.2015.52.2.143.
  8. J. Byun, J. Kim, S. Heo, and H. Kim, "Stundy on simulation characteristics of low velocity impact test of carbon/epoxy composite plates manufactured by filament winding method", Trans Korean Hydrogen New Energy Soc, Vol. 29, No. 2, 2018, pp. 190-196, doi: https://doi.org/10.7316/KHNES.2018.29.2.190.
  9. Dassault System, "Abaqus WCM user manual", 2013. Retrieved from https://dl-manual.com/doc/user-manual-2o29pxq51nv0.
  10. Dassault System, "Abaqus documentation 2016", 2016. Retrieved from http://130.149.89.49:2080/v2016/index.html.
  11. Korea Gas Safety Corporation, "Facility/technical/inspection code for manufacture of nomnetal liner composite cylinders for high-pressure gases", Korea Gas Safety Corporation, AC418, 2017, pp. 1-37. Retrieved from https://cyber.kgs.or.kr/kgscode.codeSearch.view.ex.do?onEngYn=F&pubFldCd=&pubMid=&pubCd=AC418_170210&stDayY=2008&stDayM=01&etDayY=2018&etDayM=06.
  12. Z. Hashin, "Failure criteria for unidirectional fiber composites", J. Appl. Mech., Vol. 47, No. 2, 1980, pp. 329-334, doi: https://doi.org/10.1115/1.3153664.
  13. J. S. Park, "Progressive failure analysis and design of filament wound pressure vessels", Korea Advanced Institute of Science and Technology, Vol. 55, No. 1, 2011, pp. 63-71. Retrieved from http://kdrm.kaist.ac.kr/ezpdfwebviewer/ezpdf/customLayout.jsp?encdata=8294B3E2AB70419565661182A5F4FE169917C3E772A0285E2FB786DC5D35D0EBC1C53DF5B42EB322E9BB9D4F29B39B9528E3EC8C378337ACA6BC9B9DE42EE43BBD3F095182F210DBBD3F095182F210DB5B00F5FD41B0997C&lang=ko.