Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of a Cemented Carbide-Welded Deburring Tool for Burr Removal in Drill Holes of AL6061 Workpieces

AL6061 소재의 홀 가공 시 버 제거를 위한 초경합금 접합 디버링 공구 개발

  • 사민우 (에스제이티 기업부설연구소) ;
  • 이재원 (에스제이티 기업부설연구소)
  • Received : 2015.12.05
  • Accepted : 2015.12.11
  • Published : 2021.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

In recent years, automated process technology has allowed for the rapid manufacturing of metal parts. Maintaining high product quality is of vital importance during the production of these parts. Surface defects occurring after processing can compromise their assembly precision and performance. In this study, a deburring tool was developed that can remove burrs generated from drilling. Through the evaluation of processing, burrs were completely removed at entrance and exit surfaces. Therefore, this newly developed deburring tool shows better performance than deburring tools currently in use.

Keywords

Acknowledgement

This research was financially supported by the Ministry of Small and Medium-sized Enterprises (SMEs) and Startups(MSS), Korea, under the "Regional Specialized Industry Development Plus Program(R&D, S2838217)" supervised by the Korea Institute for Advancement of Technology(KIAT).

References

  1. Egashira, K., Nomura, Y., Murozaki, Y., and Fukui, J., "Edge finishing and deburring of back surfaces of microholes using micro-cutting tools," Precision Engineering, Vol. 37, pp. 248-254, 2013. https://doi.org/10.1016/j.precisioneng.2012.09.002
  2. Bae, J. -K., Park, H. -Y., Kwon, B. -C., and Ko, S. -L., "Determination of cutting conditions for an efficient deburring process using a new deburring tool," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 109-117, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.109
  3. Cho, C. -H. and Kim, K. -H., "Design of a deburring tool for intersecting holes in aluminum alloys," Journal of Materials Processing Technology, Vol. 212, pp. 1132-1138, 2012. https://doi.org/10.1016/j.jmatprotec.2011.12.020
  4. Bae, J. -K., Ahn, D. -H., Kwon, B. -C., and Ko, S. -L., "Development of efficient brush deburring process for valve body of auto transmission," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 1, pp. 144-152, 2018.
  5. Lee, K. U. and Ko, S. L., "Developing of deburring tool for the burr at the intersecting holes," Korean Society for Precision Engineering, pp. 403-404. 2016.
  6. Kim, B. K. and Ko, S. L., "Experiment Analysis of the Burr Formation on the Inclined Exit Surface in Drilling," Journal of the Korean Society for Precision Engineering, Vol. 23, No. 9, pp. 47-53, 2006.