References
- Kim, J. S., Lee, D. S., Wang, D. H., "Development of Coolant/Waste-oil Separating and Cooling System with Chip Treatment", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16 No. 3, pp. 16-23, 2017.
- Choi, S. Y., Kwon, D. G., "A Study of the Effectives for Surface Roughness by Cutting Angle and Cutting Fluid", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17 No. 1, pp. 57-62, 2018. https://doi.org/10.14775/ksmpe.2018.17.1.057
- Sin, C. H., Jang J. G., "Effect of chemical treatment and variations of the physical properties of waste water-soluble cutting oil", Journal of Environmental Science International, Vol. 13, No. 4, pp. 403-412, 2004. https://doi.org/10.5322/JES.2004.13.4.403
- Lee, H. C., Kim, G. D., "A Study on the Discrimination of the Overhead Stirrer Impeller using the Dimensions of Permanent Magnets", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18 No. 2, pp. 52-57, 2019. https://doi.org/10.14775/ksmpe.2019.18.2.052
- Lee, I. S., Kim, H. J., Kim, D. H., Kim, N. K., "A Study on Simulation of Chip Recycling System for the Management of Cutting Chip in 5-Axis FMS Line", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12 No. 6, pp. 175-181, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.175