References
- ITRS, "International technology roadmap for semiconductors 2005 edition interconnect", 2-8, (2005).
- C. Wu, Y. Li, M. R. Baklanov, and K. Croes, "Electrical reliability challenges of advanced low-k dielectrics", ECS J. Solid State Sci. Technol., 4, 3065 (2015).
- H. Ceric, H. Zahedmanesh, and K. Croes, "Analysis of electromigration failure of nano-interconnects through a combination of modeling and experimental methods", Microelectron. Reliab., 100 (2019).
- F. Chen, M. Shinosky, B. Li, J. Gambino, S. Mongeon, P. Pokrinchak, J. Aitken, D. Badami, M. Angyal, R. Achanta, G. Bonilla, G. Yang, P. Liu, K. Li, J. Sudijono, Y. Tan, T. J. Tang, and C. Child, "Critical ultra low-k TDDB reliability issues for advanced CMOS technologies", Proc. IEEE Int. Reliab. Phys. Symp., IEEE, 464 (2009).
- M. Gall, K. B. Yeap, and E. Zschech, "Advanced concepts for TDDB reliability in conjunction with 3D stress", Proc. American Institute of Physics Inc (AIP)., 79, (2014).
- Z. Tokei, Y. L. Li, and G.P. Beyer, "Reliability challenges for copper low-k dielectrics and copper diffusion barriers", Microelectron. Reliab., 1436 (2005).
- K. Boon Yeap, M. Gall, Z. Liao, C. Sander, U. Muehle, P. Justison, O. Aubel, M. Hauschildt, A. Beyer, N. Vogel, and E. Zschech, "In situ study on low- k interconnect time-dependent-dielectric-breakdown mechanisms", J. Appl. Phys., 115, 124101 (2014). https://doi.org/10.1063/1.4869403
- M. Lane, R. H. Dauskardt, N. Krishna, and I. Hashim, "Adhesion and reliability of copper interconnects with Ta and TaN barrier layers", J. Mater. Res., 15, 203 (2000). https://doi.org/10.1557/JMR.2000.0033
- Y. Au, Y. Lin, H. Kim, E. Beh, Y. Liu, and R. G. Gordon, "Selective Chemical Vapor Deposition of Manganese Self-Aligned Capping Layer for Cu Interconnections in Microelectronics", Journal of The Electrochemical Society, 157(6), 341 (2010).
- D. Edelstein, C. Uzoh, C. Cabral, P. DeHaven, P. Buchwalter, A. Simon, E. Cooney, S. Malhotra, D. Klaus, H. Rathore, B. Agarwala, D. Nguyen, , "A High Performance Liner for Copper Damascene Interconnects", Proc. Interconnect Technol. Conf., IEEE, 9 (2001).
- W. L. Wang, C. T. Wang, W.C. Chen, K. T. Peng, M. H. Yeh, H. C. Kuo, H. J. Chien, J. C. Chuang, and T. H. Ying, "The Reliability Improvement of Cu Interconnection by the Control of Crystallized α-Ta/TaNx Diffusion Barrier", J. Nanomater., 917935 (2015).
- C. L. Lo, M. Catalano, A. Khosravi, W. Ge, Y . Ji, D. Y. Zemlyanov, L. Wang, R. Addou, Y. Liu, R. M. Wallace, M. J. Kim, and Z. Chen, "Enhancing Interconnect Reliability and Performance by Converting Tantalum to 2D Layered Tantalum Sulfide at Low Temperature", Adv. Mater., 31, 1902397 (2019). https://doi.org/10.1002/adma.201902397
- A. Furuya, H. Tsuda, and S. Ogawa, "Ta-rich atomic layer deposition TaN adhesion layer for Cu interconnects by means of plasma-enhanced atomic layer deposition", J. Vac. Sci. Technol. B, 23(3), 979 (2005). https://doi.org/10.1116/1.1926289
- S. S. Wong, C. Ryu, H. Lee, and K. W. Kwon, "Barriers For Copper Interconnections", Proc. MRS., 514, 75 (1998). https://doi.org/10.1557/PROC-514-75
- J. Shang, J. Hao, T. Hang, and M. Li, "Diffusion barrier effect of Ta/Ti bilayer in organic dielectric/Cu interconnects", Thin Solid Films, 653(1), 113 (2018). https://doi.org/10.1016/j.tsf.2018.03.025
- L. P. Buchwalter, "Chromium and tantalum adhesion to plasma-deposited silicon dioxide and silicon nitride", J. Adhesion Sci. Technol., 9(1), 97 (1995). https://doi.org/10.1163/156856195X00329
- K. S. Kim and N. Aravas, "Elastoplastic analysis of the peel test", Int. J. Solids Struct., 24(4), 417 (1988). https://doi.org/10.1016/0020-7683(88)90071-6
- S. C. Park, J. H. Lee, J. W. Lee, I. H. Lee, S. E. Lee, B. I. Song, Y. K. Chung, and Y. B. Park, "Effect of Ar+ RF Plasma Treatment Conditions on Interfacial Adhesion Energy Between Cu and ALD Al2O3 Thin Films for Embedded PCB Applications(in Kor.)", J. Microelectron. Packag. Soc., 14(1), 61 (2007).
- R. Shaviv, S. Toham, and P. Woytowitz, "Optimizing the Precision of the Four-point Bend Test for the Measurement of Thin-film Adhesion", Microelectronic Eng., 82(2), 99 (2005). https://doi.org/10.1016/j.mee.2005.06.006
- P. G. Charalambides, J. Lund, A. G. Evans, and R. M. McMeeking, "A test specimen for determining the fracture resistance of biomaterial interfaces", J. Appl. Mech., 111, 77 (1989).
- R. H. Dauskardt, M. Lane, Q. Ma, and N. Krishna, "Adhesion and debonding of multi-layer thin film structures", Engng. Fract. Mech., 61(1), 141 (1998). https://doi.org/10.1016/S0013-7944(98)00052-6
- M. F. Kanninen, "An augmented double cantilever beam model for studying crack propagation and arrest", Int. J. of Fract., 9(1), 83 (1973). https://doi.org/10.1007/BF00035958
- T. S. Kim, N. Tsuji, N. Kemeling, K. Matsushita, D. Chumakov, H. Geisler, E. Zschech, and R. H. Dausdardt, "Depth dependence of ultraviolet curing of organosilicate low-k thin films", J. Appl. Phys., 103(6), 064108 (2008). https://doi.org/10.1063/1.2894727
- H. Lee, M. Jeong, G. Kim, K. Son, J. Seo, T. S. Kim, and Y. B. Park, "Effects of Post-annealing and Co Interlayer Between SiNx and Cu on the Interfacial Adhesion Energy for Advanced Cu Interconnections", Electron. Mater. Lett., 16, 311 (2020). https://doi.org/10.1007/s13391-020-00210-7
- S. Kang, T. Yoon, B. S. Ma, M. S. Cho, and T.-S. Kim, "Liquid-assisted adhesion control of graphene-copper interface for damage-free mechanical transfer", Appl. Surf. Sci., 551(15), 149229 (2021). https://doi.org/10.1016/j.apsusc.2021.149229
- I. Lee, J. Noh, J.-Y. Lee, and T.-S. Kim, "Co-optimization of Adhesion and Power Conversion Efficiency of Organic Solar Cells by Controlling Surface Energy of Buffer Layers", ACS Appl. Mater. Inter., 9(42), 37395 (2017). https://doi.org/10.1021/acsami.7b10398
- Y. Chung, S. Lee, C. Mahata, J. Seo, S.-M. Lim, M. Jeong, H. Jung, Y.-C, Joo, Y.-B, Park, H. Kim, and T. Lee, "Coupled self-assembled monolayer for enhancement of Cu diffusion barrier and adhesion properties", RSC Adv., 4, 60123 (2014). https://doi.org/10.1039/C4RA08134J
- M. Jeong, B.-H. Bae, H. Lee H.-O. Kang, W.-J. Hwang, J.-M. Yang, and Y.-B. Park, "Effects of post-annealing and temperature/humidity treatments on the interfacial adhesion energy of the Cu/SiN x interface for Cu interconnects", Jpn. J. Appl. Phys., 55, 06JD01 (2016). https://doi.org/10.7567/JJAP.55.06JD01
- T. Scherban, B. Sun, J. Blaine, C. Block, B. Jin, and E. Andideh, "Interfacial Adhesion of Copper-Low k Interconnects", Proc. International Interconnect Technology Conference (IITC), Burlingame, CA, USA, 257, IEEE (2001).
- M. Lane, "Interface fracture", Annu. Rev. Mater. Res., 33, 29 (2003). https://doi.org/10.1146/annurev.matsci.33.012202.130440
- J. W. Hutchinson and Z. Suo, "Mixed Mode Cracking in Layered Materials", Adv. Appl. Mech., 29, 63 (1992). https://doi.org/10.1016/S0065-2156(08)70164-9
- G. Kim, J. Lee, Se. H. Park, S. Kang, T. S. Kim, and Y. B. Park, "Comparison of Quantitative Interfacial Adhesion Energy Measurement Method between Copper RDL and WPR Dielectric Interface for FOWLP Applications(in Kor.)", J. Microelectron. Packag. Soc., 25(2), 41 (2018). https://doi.org/10.6117/KMEPS.2018.25.2.041
- T. M. Shaw, E. Liniger, G. Bonilla, J. P. Doyle, B. Herbst, X. H. Liu, and M. W. Lane, "Experimental Determination of the Toughness of Crack Stop Structures", Proc. International Interconnect Technology Conference (IITC), Burlingame, CA, USA, 114, IEEE (2007).