References
- M. Abtew, G. Selvaduray, "Lead-free Solders in Microelectronics", Material Science and Engineering: R: Reports, 27(5), 95-141 (2000). https://doi.org/10.1016/S0927-796X(00)00010-3
- T. J. Swanson, "Properties of Mixing SAC Solder Alloys with Bismuth-containing Solder Pastes for a Low Reflow Temperature Process", Master Thesis, pp.22-25, Rochester Institute of Technology, New York, US (2018).
- H. Nishikawa, N. Iwata, "Improvement of Joint Reliability of Sn-Ag-Cu Solder Bumps on Cu by a Laser Process", Mater. Trans., 56, 1025-1029 (2015). https://doi.org/10.2320/matertrans.MI201421
- L. A. Wentlent, M. Genanu and T. Alghoul, "Effects of Laser Selective Reflow on Solder Joint Microstructure and Reliability," 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, 425-433 (2018). doi: 10.1109/ECTC.2018.00070.
- H. Nishikawa, N. Iwata, "Formation and growth of intermetallic compound layers at the interface during laser soldering using Sn-Ag Cu solder on a Cu Pad", Journal of Materials Processing Technology, 215, 6-11 (2015). https://doi.org/10.1016/j.jmatprotec.2014.08.007
- H. Nishikawa, N. Iwata, H. Kubota, "Microstructure of lead-free solder bumps using laser reflow soldering", IOP Conf. Ser.: Mater. Sci. Eng., 61, 012038 (2014). doi: 10.1088/1757-899X/61/1/012038.
- J. O. Kim, J. P. Jung, J. H. Lee, J. Suh and H. S. Kang, "Effects of Laser Parameters on the Characteristics of a Sn3.5 wt.%Ag Solder Joint", Met. Mater. Int., 15(1), 119-123 (2009). https://doi.org/10.1007/s12540-009-0119-3
- A. K. Gain, Y. C. Chan, W. K. C. Yung, "Effect of additions of ZrO2nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au/Ni metallized Cu pads", Microelectronics Reliability, 51, 2306-2313 (2011). https://doi.org/10.1016/j.microrel.2011.03.042
- Y. Tang, C. Pan, and G. Li., "Influence of TiO2 Nanoparticles on Thermal Property, Wettability and Interfacial Reaction in Sn-3.0Ag-0.5Cu-xTiO2 Composite Solder", Journal of Materials Science: Materials in Electronics, 24(5), 1587-1597 (2016). https://doi.org/10.1007/s10854-012-0980-6
- C. Srivalli and M. Z. Abdullah., "Microstructure and Mechanical Properties of Pb-free Sn-3.0Ag-0.5Cu Solder Pastes Added with NiO Nanoparticles after Reflow Soldering Process", Materials & Design, 90, 499-507 (2016). https://doi.org/10.1016/j.matdes.2015.10.142
- Y. Shen, S. Zhou, J. Li, C. Yang, S. Huang, S. Lin, H. Nishikawa, "Sn-3.0Ag-0.5Cu/Sn-58Bi composite solder joint assembled using a low-temperature reflow process for PoP technology", Materials and Design, 183(108144), 1-9 (2019).
- J. Chen, S. Lo, S. Hsu and C. Hsu, "Fabrication and Characteristics of SnAgCu Alloy Nanowires for Electrical Connection Application", Micromachines, 9(664), 1-8 (2018).
- D. H. Jung, D. U. Lim, B. G. Baek, S. H. Yim, J. H. Yonn, J. P. Jung, "Wettability Analysis of Solders using Wetting Balance Test (in Kor.)", J. Microelectron. Packag. Soc., 24(2), 1-9 (2017). https://doi.org/10.6117/kmeps.2017.24.2.001
- J. W. Kang, J. P. Jung, "Low Temperature Solder of Sn-Bi Series and Its Properties (in Kor.)", Electronics Packaging and Surface Mount Technology, 16, 41-50 (2020).
- W. S. Jeon, S. H. Rajendran and J. P. Jung, "Wettability Evaluation by Wetting Balance Test and Wetting Characteristics of Solders (in Kor.)", J. Microelectron. Packag. Soc., 26(3), 1-6 (2019)
- J. H. Lee, Y. M. Kim, J. H. Hwang, Y. H. Kim, "Wetting characteristics of Cu-xZn layers for Sn-3.0Ag-0.5Cu solders", Journal of Alloys and Compounds, 547, 10-13 (2013).
- H. Fallahi, M. S. Nurulakmal, A. Fallahi, J. Abdullah, "Modifying the mechanical properties of lead-free solder by adding iron and indium and using a lap joint test", J Mater Sci: Mater Electron., 23, 1739-1749 (2012).
- Y. Li, X. Zhao, Y. Liu, Y. Wang and Y. Wang, "Effect of TiO2 Addition Concentration on the Wettability and Intermetallic Compounds Growth of Sn3.0Ag0.5Cu-xTiO 2 Nano-composite Solders", J Mater Sci: Mater in Electron., 25(9), 3816-3827 (2014). https://doi.org/10.1007/s10854-014-2094-9
- Y. Wang, X. Zhao, X. Xie, Y. Gu, and Y. Liu, "Effects of Nano-SiO 2 Particles Addition on the Microstructure, Wettability, Joint Shear Force and the Interfacial IMC Growth of Sn3.0Ag0.5Cu Solder", J Mater Sci: Mater in Electron., 26(12), 9387-9395 (2015). https://doi.org/10.1007/s10854-015-3151-8
- M. Qu, T. Cao, Y. Cui, F. Liu and Z. Jiao, "Effect of NanoZnO Particles on Wettability, Interfacial Morphology and Growth Kinetics of Sn-3.0Ag-0.5Cu-xZnO Composite Solder", J Mater Sci: Mater in Electron., 30(21), 19214-19226 (2019). https://doi.org/10.1007/s10854-019-02279-9
- Z. Yin, M. Lin, Q. Li and Z. Wu, "Effect of Doping Ni Nanoparticles on Microstructure Evolution and Shear Behavior of Sn-3.0Ag-0.5Cu(SAC305)/Cu-2.0Be Solder Joints during Reflowing", J Mater Sci: Mater in Electron., 31(6), 4905-4914 (2020). https://link.springer.com/article/10.1007/s10854-020-03054-x.
- A. Sharma, H. R. Sohn and J. P. Jung, "Effect of Graphene Nanoplatelets on Wetting, Microstructure, and Tensile Characteristics of Sn-3.0Ag-0.5Cu (SAC) Alloy", Metallurgical and Materials Transactions, A 47(1), 494-503 (2016).
- S. Lotfian, J. M. Molina-Aldareguia, K. E. Yazzie, J. Llorca, N. Chawla, "Mechanical characterization of lead-free Sn-Ag-Cu solder joints by high-temperature nanoindentation", Journal of Electronic Materials, 42, 1085-1091 (2013). https://doi.org/10.1007/s11664-013-2517-z
- T. Fouzder, I. Shafiq, Y. C. Chan, A. Sharif and W. K. C. Yung. "Influence of SrTiO3 Nano-particles on the Microstructure and Shear Strength of Sn-Ag-Cu Solder on Au/Ni Metallized Cu Pads", Journal of Alloys and Compounds, 509(5), 1885-1892 (2011). https://doi.org/10.1016/j.jallcom.2010.10.081
- F. Cheng, H. Nichikawa, T. Takemoto, "Microstructural and mechanical properties of Sn-Ag-Cu lead-free solders with minor addition of Ni and/or Co", Journal of Material Science, 23, 3643-3648 (2008).
- G. Chen, X. H. Wang, J. Yang, W. L. Xu, Q. Lin, "Effect of micromorphology on corrosion and mechanical properties of SAC305 lead-free solders", Microelectronics Reliability, 108, 113634 (2020). https://doi.org/10.1016/j.microrel.2020.113634
- D. H. Jung, A. Sharma, D. U. Lim, J. H. Yun and J. P. Jung, "Effects of AlN Nanoparticles on the Microstructure, Solderability, and Mechanical Properties of Sn-Ag-Cu Solder", Metallurgical and Materials Transactions A, 48(9), 4372-4384 (2017). https://doi.org/10.1007/s11661-017-4178-7
- M. Rui, X. Lu, S. Chen, L. Ye, J. Liu, "Ti02 Nanoparticles Functionalized Sn/3.0Ag/O.5Cu Lead-free Solder", IEEE International Conference on Electronic Packaging Technology & High Density Packaging, Guilin, China, 203-207 (2012).
- A. A. El-Daly, W. M. Desoky, T. A. Elmosalami, M. G. ElShaarawy, A. M. Abdraboh, "Microstructural modifications and properties of SiC nanoparticles reinforced Sn-3.0Ag-0.5Cu solder alloy", Materials & Design, 65, 1196-1204 (2015). https://doi.org/10.1016/j.matdes.2014.08.058