References
- A. Hermann, T. Chaudhuri, and P. Spagnol, Bipolar plates for PEM fuel cells: A review, International Journal of Hydrogen Energy, 30, 1297 (2005). Doi: https://doi.org/10.1016/j.ijhydene.2005.04.016
- S. H. Lee, J. S. Kim, N. H. Kang, H. H. Jo, and D. H. Nam, Surfce Characteristic of Graphene Coated Stainless Steel for PEMFC Bipolar Plate, Journal of The Korean Institute of Surface Engineering, 44, 226 (2011). Doi: https://doi.org/10.5695/JKISE.2011.44.5.226
- A. Pozio, F. Zaza, A. Masci, and R. F. Silva, Bipolar plate materials for PEMFCs : A conductivity and stability study, Journal of Power Sources, 179, 631 (2008). Doi: https://doi.org/10.1016/j.jpowsour.2008.01.038
- M. P. Brady, H. Wang, B. Yang, J. A. Turner, M. Bordignon, R. Molins, M. A. Elhamid, L. Lipp, and L. R. Walker, Growth of Cr-Nitrides on commercial Ni-Cr and Fe-Cr base alloys to protect PEMFC bipolar plates, International Journal of Hydrogen Energy, 32, 3778 (2007). Doi: https://doi.org/10.1016/j.ijhydene.2006.08.044
- R. A. Antunes, M. C. L. Oliveira, G. Ett, and V. Ett, Corrosion of metal bipolar plates for PEM fuel cells: A review, International Journal of Hydrogen Energy, 35, 3632 (2010). Doi: https://doi.org/10.1016/j.ijhydene.2010.01.059
- D. P. Davies, P. L. Adcock, M. Turpin, and S. J. Rowen, Stainless steel as a bipolar plate material for solid polymer fuel cells, Journal of Power Sources, 86, 237 (2000). Doi: https://doi.org/10.1016/S0378-7753(99)00524-8
- R. C. Makkus, A. H. H. Janssen, F. A. de Bruijn, and R. K. A. M. Mallant, Use of stainless steel for cost competitive bipolar plates in the SPFC, Journal of Power Sources, 86, 274 (2000). Doi: https://doi.org/10.1016/S0378-7753(99)00460-7
- Y. Yang, L. J. Guo, and H. Liu, Corrosion characteristics of SS316L as bipolar plate material in PEMFC cathode environments with different acidities, International Journal of Hydrogen Energy, 36, 1654 (2011). Doi: https://doi.org/10.1016/j.ijhydene.2010.10.067
- R. F. Zhang, D. J. Yang, H. Zhu, and C. M. Zhang, Research on Potentiostatic Accelerated Test Method for Fuel Cell Metal Bipolar Plate, Journal of The Electrochemical Society, 89, 3 (2019). Doi: https://doi.org/10.1149/08907.0003ecst
- N. Kumar, G. P. Shaik, S. Pandurangan, B. Khalkho, L. and Neelakantan, R. Chetty, Corrosion characteristics and fuel cell performance of a cost-effective high Mn-Low Ni austenitic stainless steel as an alternative to SS 316L bipolar plate, International Journal of Energy Research, 44, 1 (2020). Doi: https://doi.org/10.1002/er.5422
- H. Wang, M. A. Sweikart, and J. A. Turner, Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells, Journal of Power Sources, 115, 243 (2003). Doi: https://doi.org/10.1016/S0378-7753(03)00023-5
- I. H. Oh, and J. B. Lee, Corrosion Behaviors of 316L Stainless Steel Bipolar Plate of PEMFC and Measurements of Interfacial Contact Resistance(ICR) between Gas Diffusion Layer(GDL) and Bipolar Plate, Corrosion Science and Technology, 9, 129 (2010). Doi: https://doi.org/10.14773/cst.2010.9.3.129
- L. F. Lin, C. Y. Chao, and D. D. Macdonald, A Point Defect Model for Anodic Passive Films: II . Chemical Breakdown and Pit Initiation, Journal of The Electrochemical Society, 128, 1194 (1981). Doi: https://doi.org/10.1149/1.2127592
- I. Olefjord, B. Brox, and U. Jelestam, Surface Composition of Stainless Steels during Anodic Dissolution and Passivation Studied by ESCA, Journal of The Electrochemical Society, 132, 2854 (1985). Doi: https://doi.org/10.1149/1.2113683
- Z. Wang, A. Seyeux, S. Zanna, V. Maurice, and P. Marcus, Chloride-induced alterations of the passive film on 316L stainless steel and blocking effect of pre-passivation, Electrochimica Acta, 329, 135159 (2020). Doi: https://doi.org/10.1016/j.electacta.2019.135159
- L. R. Hilbert, D. B. Ravn, J. Kold, and L. Gram, Influence of surface roughness of stainless steel on microbial adhesion and corrosion resistance, International Biodeterioration & Biodegradation, 52, 175 (2003). Doi: https://doi.org/10.1016/S0964-8305(03)00104-5
- G. T. Burstein, and S. P. Vines, Repetitive Nucleation of Corrosion Pits on Stainless Steel and the Effects of Surface Roughness, Journal of The Electrochemical Society, 148, 504 (2001). Doi: https://doi.org/10.1149/1.1416503
- ASTM G46-94, Standard Guide for Examination and Evaluation of Pitting Corrosion, p. 5, ASTM International, West Conshohocken, PA (2005).
- ASTM G31-72, Standard Practice for Laboratory Immersion Corrosion Testing of Metals, P.7, ASTM International, West Conshohocken, PA (2004).
- I. J. Jang, K. T. Kim, Y. R. Yoo, and Y. S Kim, Effects of Ultrasonic Amplitude on Electrochemical Properties During Cavitation of Carbon Steel in 3.5% NaCl Solution, Corrosion Science and Technology, 19, 163 (2020). Doi: https://doi.org/10.14773/cst.2020.19.4.163
- H. K. Hwang, and S. J. Kim, Effect of Temperature on Electrochemical Characteristics of Stainless Steel in Green Death Solution Using Cyclic Potentiodynamic Polarization Test, Corrosion Science and Technology, 20, 266 (2021). Doi: https://doi.org/10.14773/cst.2021.20.5.266
- H. S. Kwon, H. S. Kim, C. J. Park, and H. J. Jang, Comprehension of stainless steels, p.180, 191, 198, 212 Steel & Metal News (2007).
- R. N. Parkins, Localized corrosion and crack initiation, Materials Science Engineering : A, 103, 143 (1988). Doi: https://doi.org/10.1016/0025-5416(88)90562-9
- P. Deng, Q. Peng, E. H. Han, W. Ke, and C. Sun, Proton irradiation assisted localized corrosion and stress corrosion cracking in 304 nuclear grade stainless steel in simulated primary PWR water, Journal of Materials Science & Technology, 65, 61 (2021). Doi: https://doi.org/10.1016/j.jmst.2020.04.068
- H. Ogawa, H. Omata, I. Itoh, and H. Okada, Auger Electron Spectroscopic and Electrochemical Analysis of the Effect of Alloying Elements on the Passivation Behavior of Stainless Steels, Journal of The Electrochemical Society, 34, 52 (1978). Doi: https://doi.org/10.5006/0010-9312-34.2.52