References
- J. B. Lee and I. H. Oh, Corrosion characteristics and interfacial contact resistances of TiN and CrN coatings deposited by PVD on 316L stainless steel for polymer electrolyte membrane fuel cell bipolar plates, Corrosion Science and Technology, 12, 171 (2013). Doi: https://doi.org/10.14773/cst.2013.12.4.171
- B. C. H. Steele and A. Heinzel, Materials for fuel-cell technologies, Nature, 414, 345 (2001). Doi: https://doi.org/10.1142/9789814317665_0031
- J. Ihonen, F. Jaouen, G. Lindbergh, and G. Sundholm, A novel polymer electrolyte fuel cell for laboratory investigations and in-situ contact resistance measurements, Electrochemica Acta, 46, 2899 (2001). Doi: https://doi.org/10.1016/S0013-4686(01)00510-2
- J. M. Moton, B. D. James, and W. G. Colella, Advances in electrochemical compression of hydrogen, Proc. of the ASME 2014 12th Int. Conference on Fuel Cell Science, Engineering and Technology, p. 1, ASME (2014). Doi: https://doi.org/10.1115/FuelCell2014-6641
- H. Tawfik, Y. Hung and D. Mahagan, Bipolar plate durability and challenges. polymer electrolyte fuel cell degradation, pp. 249 - 291, Academic Press (2012),
- H. Tsuchiya and O. Kobayashi, Mass production cost of PEM fuel cell by learning curve, International Journal of Hydrogen Energy, 29, 985 (2004). Doi: https://doi.org/10.1016/j.ijhydene.2003.10.011
- A. Hermann, T. Chaudhuri and P. Spagnol, Bipolar plates for PEM fuel cells: A review, International Journal of Hydrogen Energy, 30, 1297 (2005). Doi: https://doi.org/10.1016/j.ijhydene.2005.04.016
- S. Jannat, H. Rashtchi, M. Atapour, M. A. Golozar, H. Elmkhah and M. Zhiani, Preparation and performance of nanometric Ti/TiN multi-layer physical vapor deposited coating on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells, Journal of Power Sources, 435, 226818 (2019). Doi: https://doi.org/10.1016/j.jpowsour.2019.226818
- N. Aukland, A. Boudina, D. S. eddy, J. V. Mantese, M. P. Thompson, and S. S. Wang, Alloys that form conductive and passivating oxides for proton exchange membrane fuel cell bipolar plates, Journal of Materials Research, 19, 1723 (2004). Doi: https://doi.org/10.1557/JMR.2004.0216
- R. C. Newman, W. P. Wong, H. Ezuber and A. Garner, Pitting of Stainless Steels by Thiosulfate Ions, Corrosion, 45, 282 (1989). Doi: https://doi.org/10.5006/1.3577855
- A. Garner, Thiosulfate Corrosion in Paper-Machine White Water, Corrosion, 41, 587 (1985). Doi: https://doi.org/10.5006/1.3582988
- P. A. Lozada, O. O. Xometl, D. G. Lucero, N. V. Likhanova, M. A. D. Aguilar, I. V. Lijanova, and E. A. Estrada, The Inhibition of Aluminum Corrosion in Sulfuric Acid by Poly(1-vinyl-3-alkyl-imidazolium Hexafluorophosphate), Materials, 7, 5711 (2014). Doi: https://doi.org/10.3390/ma7085711
- Y. Yang, L. J. Guo, and H. Liu, Corrosion characteristics of SS316L as bipolar plate material in PEMFC cathode environments with different acidities, International Journal of Hydrogen Energy, 36, 1654 (2011). Doi: https://doi.org/10.1016/j.ijhydene.2010.10.067
- Y. Yang, L. J. Guo, and H. Liu, Factors affecting corrosion behavior of SS316L as bipolar plate material in PEMFC cathode environments, International Journal of Hydrogen Energy, 37, 13822 (2012). Doi: https://doi.org/10.1016/j.ijhydene.2012.04.026
- J. T. Kim, J. H. Lee, and Y. S. Tak, Relationship between carbon corrosion and positive electrode potential in a proton-exchange membrane fuel cell during start/stop operation, Journal of Power Sources, 192, 674 (2009). Doi: https://doi.org/10.1016/j.jpowsour.2009.03.039
- Y. Wang, and D. O. Northwood, Effects of O2 and H2 on the corrosion of SS316L metallic bipolar plate materials in simulated anode and cathode environments of PEM fuel cells, Electrochemica Acta, 52, 6793 (2007). Doi: https://doi.org/10.1016/j.electacta.2007.05.001
- B. S. Covino, Jr. M. Rosen, T. J. Driscoll, T. C. Murphy, and C. R. Molock, The effect of oxygen on the open-circuit passivity of Fe-18Cr, Corrosion Science, 26, 95 (1986). Doi: https://doi.org/10.1016/0010-938X(86)90039-9
- H. Tsuchiya, S. Fujimoto, O. Chihara, and T. Shibata, Semiconductive behavior of passive films formed on pure Cr and Fe-Cr alloys in sulfuric acid solution, Electrochimica Acta, 47, 4357 (2002). Doi: https://doi.org/10.1016/S0013-4686(02)00508-X
- W. Y. Lai, W. Z. Zhao, Z. F. Yin, and J. Zhang, EIS and XPS studies on passive film of AISI 304 stainless steel in dilute sulfuric acid solution, Surface and Interface Analysis, 44, 418 (2012). Doi: https://doi.org/10.1002/sia.3819
- Z. Ai, J. Jiang, W. Sun, D. Song, H. Ma, J. Zhang, D. Wang, Passive behaviour of alloy corrosion-resistant steel Cr10Mo1 in simulating concrete pore solutions with different pH, Applied Surface Science, 389, 1126 (2016). Doi: https://doi.org/10.1016/j.apsusc.2016.07.142
- H. Luo, C. Dong, K. Xiao, X. Li, The passive behaviour of ferritic stainless steel containing alloyed tin in acidic media, Royal Society of Chemistry, 6, 9940 (2016). Doi: https://doi.org/10.1039/C5RA23698C
- Z. Wang, L. Zhang, Z. Zhang, and M. Lu, Combined effect of pH and H2S on the structure of passive film formed on type 316L stainless steel, Applied Surface Science, 458, 686 (2018). Doi: https://doi.org/10.1016/j.apsusc.2018.07.122
- X. Y. Wang, Y. S. Wu, L. Zhang, and Z. Y. Yu, Atomic Force Microscopy and X-Ray Photoelectron Spectroscopy Study on the Passive Film for Type 316L Stainless Steel, Corrosion, 57, 54, (2001). Doi: https://doi.org/10.5006/1.3290380
- G. H. Smudde Jr, W. I. Bailey, B. S. Felker, M. A. George, and J. G. Langan, Materials selection for HBr service, Corrosion Science, 37, 1931 (1995). Doi: https://doi.org/10.1016/0010-938X(95)00075-U
- H. S. Kwon, H. S. Kim, C. J. Park, and H. J. Jang, Comprehension of stainless steels, p. 165, 191 Steel & Metal News (2007).
- A. L. Paulina, O. X. Octavio, G. L. Diego, V. L. Natalya, A. D. A. Marco, V. L. Irina, and A. E. Elsa, The Inhibition of Aluminum Corrosion in Sulfuric Acid by Poly(1- vinyl-3-alkyl-imidazolium Hexafluorophosphate, Materials, 7, 5711 (2014). Doi: https://doi.org/10.3390/ma7085711
- L. F. Lin, C. Y. Chao, and D. D. Macdonald, A Point Defect Model for Anodic Passive Films: II . Chemical Breakdown and Pit Initiation, Journal of The Electrochemical Society, 128, 1194 (1981). Doi: https://doi.org/10.1149/1.2127592
- D. A. Jones, Principles and prevention of corrosion, pp. 267 - 281, Pearson (1992).
- D. D. Macdonald and M. U. Macdonald, Theory of Steady-State Passive Films, Journal of The Electrochemical Society, 137, 2395 (1990). Doi: https://doi.org/10.1149/1.2086949
- Z. Wang, F. D. Franco, A. Seyeux, S. Zanna, V. Maurice, and P. Marcus, Passivation-Induced Physicochemical Alterations of the Native Surface Oxide Film on 316L Austenitic Stainless Steel, Journal of The Electrochemical Society, 166, 3376 (2019). Doi: https://doi.org/10.1149/2.0321911jes
- R. C. Newman, 2001 W.R. Whitney Award Lecture: Understanding the Corrosion of Stainless Steel, Corrosion, 57, 1030 (2001). Doi: https://doi.org/10.5006/1.3281676
- I. Olefjord, B. Brox, and U. Jelestam, Surface Composition of Stainless Steels during Anodic Dissolution and Passivation Studied by ESCA, Journal of The Electrochemical Society, 132, 2854 (1985). Doi: https://doi.org/10.1149/1.2113683