Journal of the Korea Convergence Society (한국융합학회논문지)

Korea Convergence Society (한국융합학회)
권호 표지
DOI QR코드

DOI QR Code

Convergence Comparison of Linear Oscillating Electric Machines

리니어 오실레이팅 전기기기의 비교 연구

  • Jeong, Sung-In (Department of Automotive Engineering, Gwangju University) ;
  • Eom, Sang In (Department of Automotive Engineering, Gwangju University)
  • 정성인 (광주대학교 미래자동차공학과) ;
  • 엄상인 (광주대학교 미래자동차공학과)
  • Received : 2021.09.23
  • Accepted : 2021.12.20
  • Published : 2021.12.28
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the results of study of linear oscillating electric machine; Cartesian, cylindrical type with permanent magnet, flux reversal, cylindrical reluctance, and transverse flux type. The focus of the work is the suggestion of the characteristics and design process of propose topology, respectively. First of all, there are five types of the proposed to this study on the basis of the existing literatures; Cartesian type, cylindrical type, flux reversal type, cylindrical reluctance type, and transverse flux type. All topology is achieved using equivalent magnetic circuit considering leakage elements as initial modeling. Cartesian type is investigated by number of phases and number of pole pairs using optimal process. A cylindrical type is described by number of phases and displacement of stroke. The flux reversal type is proposed based on the symmetrical and non symmetrical stator cores of the surface mounted PMs mover, and non slanted PMs and slanted PMs of the flux concentrating PMs mover. A cylindrical reluctance type is studied by the shape of mover teeth in geometric aspect to reduce force ripple and increase magnetic flux. A transverse flux type is considered by dividing the transverse flux electric excited and the transverse flux permanent magnet excited. It is significant that the study gives a design rules and features of linear oscillating electric machine.

본 연구는 하이브리드 자동차의 리니어 오실레이팅 전기기기의 비교 연구를 위해 수행하였으며, 다섯 가지(직각좌표형, 영구자석 매입 원통형, 자속역전식, 릴럭턴스 원통형, 횡자속 형태.)의 제안된 형태의 비교를 통해 리니어 오실레이팅 전기기기의 연구결과를 제시하였다. 모든 형태는 초기 모델링으로서 누설을 고려한 등가자기회로법을 통해 수행되었다. 영구자석 형태의 이동자로 구성된 직각좌표형은 구속조건 아래에서 설계변수들의 파라미터 분석을 통한 최적화 과정이 수행되었고, 영구자석 매입 원통형은 이동자에 영구자석과 Back-iron이 결합된 구조를 제시하였다. 자속역전식은 영구자석형 이동자의 매입형태에 따른 분석과 향상된 모델을 제시하며, 릴럭턴스 원통형은 유효 자속의 증가와 리플을 저감하기 위한 이동자 치의 형태를 비교·분석하였다. 횡자속 형태에서는 2차원 분석기법과 3차원 분석을 통한 비교를 수행하였다. 본 연구는 설계 규칙과 리니어 오실레이팅 전기기기의 특성을 제공한다는 측면에서 의미가 있다.

Keywords

Acknowledgement

This Study was conducted by research funds from Gwangju University in 2021.

References

  1. S. Barsali, C. Miulli & A. Possenti. (2004). A control strategy to minimize fuel consumption of series hybrid electric vehicles, IEEE Trans. On Energy Conversion, 19(1), 187-195. DOI : 10.1109/TEC.2003.821862
  2. S. I. Jeong. (2017). Design Rules of Hybrid Stepping Machine for Free Piston Engine, J Electr Eng Technol, 12(3), 1219-1226. DOI : 10.5370/JEET.2017.12.3.1219
  3. Joergen Hansson and Mats Leksell. (2007). Performance of a Series Hybrid Electric Vehicle with a Free-Piston Energy Converter. DOI : 10.1109/VPPC.2006.364342
  4. C. C. Chan. (2002). The state of the art of electric and hybrid vehicles. Proceedings of the IEEE, 90(2), 247-275. DOI : 10.1109/5.989873
  5. G. Maggetto & J. Van Mierlo. (2000). Electric and electric hybrid vehicle technology : A survey, in Proc. Electric, Hybrid, and Fuel Cell Vehicles. DOI : 10.1049/ic:20000261
  6. Sigitas Kudarauskas. (2004). Introduction to oscillating electrical machines, Klaipeda, ISBN : 9955-585-75-7.
  7. W. Li, S. Gao, D. Wu & X. Zhang. (2010). Design of a linear magnetic-geared free-piston generator for series hybrid electric vehicles, IEEE Vehicle Power and Propulsion Conference(pp. 1-6). DOI : 10.1109/VPPC.2010.5729021
  8. M. F. Hsieh & Y. C. Hsu. (2012). A Generalized Magnetic Circuit Modeling Approach for Design of Surface Permanent-Magnet Machines. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 59(2), 779-792. DOI : 10.1109/TIE.2011.2161251
  9. I. Boldea. (1976). Linear Electric Machines, Drives, and MAGLEVs Handbook. IEEE Industrial Electronics Magazine, 7(4), 66-68. DOI : 10.1109/MIE.2013.2289563
  10. S. I. Jeong. (2015). Comparative study of Linear oscillating generators. Gottingen, Cuvillier Verlag. ISBN : 9783736991170
  11. T. H. Kim, H. W. Lee, Y. H. Kim, J. Lee, & I. Boldea. (2004). Development of a Flux Concentration Type Linear Oscillatory Actuator. IEEE Transactions on Magnetics, 40(4), 2092-2094. DOI : 10.1109/TMAG.2004.832461
  12. J. Lee, T. B. Lim & I. Boldea. (2002). Linear reciprocating flux reversal permanent magnetic machine. United States : (US) Patent. H02K-033/00
  13. S. I. Jeong. (2020). A Study on Design of Tubular Linear Reluctance Generator Taking Account of Leakage Elements. Journal of Magnetics, 25(2), 293-300. DOI : 10.4283/JMAG.2020.25.2.293
  14. H. Gao. (1994). Numerisches Berechnungsverfahen fuer Synchronmaschinen in Transversalfluss-Bauweise, Dusseldorf : VDI-Verl. ISBN : 9783181451212 3181451215
  15. J. Kim, K. Kim & Dae Lee. (2018). Analysis on Efficiency Characteristics of IPMSM for fuel Economy Improve of Electric Vehicle. Journal of the Korea Convergence Society, 9(4), 1-7. DOI : 10.15207/JKCS.2018.9.4.00