DOI QR코드

DOI QR Code

Machine learning approach for sorting SiC MOSFET devices for paralleling

  • Abuogo, James Opondo (Department of Electrical and Electronic Engineering, Dedan Kimathi University of Technology) ;
  • Zhao, Zhibin (State Key Laboratory of Alternate Electrical Power System with Renewable Energy Source, North China Electric Power University)
  • Received : 2018.10.29
  • Accepted : 2019.09.29
  • Published : 2020.01.20

Abstract

This paper presents the development of a machine learning model for sorting SiC MOSFET devices for paralleling. A multivariate linear regression model is developed and trained with device parameter data (as input) and current imbalance data (as label). Each of the training devices is successively paralleled with one reference device to generate the current imbalance (label) data. Devices with close values of current imbalance when individually paralleled with the reference device are expected to have relatively balanced current sharing when paralleled among themselves. This model is trained with 40 devices and tested with 20 devices. The model shows accuracies of 87.93% and 97.48% in predicting transient and steady state current imbalances, respectively. These accuracy values are obtained by comparing the model's prediction for the 20 testing devices with the actual current imbalance values when these devices are paralleled with a reference device. Based on current imbalance predictions made by these models, the devices are grouped into classes for paralleling applications. The selection of devices for paralleling based on predictions from these models result in a satisfactorily balanced current distribution. The model's performance at higher temperatures is also satisfactory.

Keywords

References

  1. Majumdar, G.: Recent technologies and trends of power devices. In: 2007 International Workshop on Physics of Semiconductor Devices, Mumbai, pp. 787-792 (2007)
  2. Baliga, B.J.: Trends in power semiconductor devices. IEEE Trans. Electron Devices 43(10), 1717-1731 (1996) https://doi.org/10.1109/16.536818
  3. Hefner, A., Berning, D., McNutt, T., Mantooth, A., Lai, J., Singh, R.: Characterization and modeling of silicon-carbide power devices. In: 2001 International Semiconductor Device Research Symposium. Symposium Proceedings (Cat. No. 01EX497), Washington, DC, USA, pp. 568-571 (2001)
  4. Cui, Y., Chinthavali, M.S., Xu, F., Tolbert, L.M.: Characterization and modeling of silicon carbide power devices and paralleling operation. In: 2012 IEEE International Symposium on Industrial Electronics, Hangzhou, pp. 228-233 (2012)
  5. Biela, J., Schweizer, M., Waffler, S., Kolar, J.W.: SiC versus Si-evaluation of potentials for performance improvement of inverter and DC-DC converter systems by SiC power semiconductors. IEEE Trans. Ind. Electron. 58(7), 2872-2882 (2011) https://doi.org/10.1109/TIE.2010.2072896
  6. Hazra, S., et al.: High switching performance of 1700-V, 50-A SiC power MOSFET over Si IGBT/BiMOSFET for advanced power conversion applications. IEEE Trans. Power Electron. 31(7), 4742-4754 (2016) https://doi.org/10.1109/TPEL.2015.2432012
  7. Sarnago, H., Lucia, O., Burdio, J.M.: A comparative evaluation of SiC power devices for high-performance domestic induction heating. IEEE Trans. Ind. Electron. 62(8), 4795-4804 (2015) https://doi.org/10.1109/TIE.2015.2405057
  8. Xue, Y., Lu, J., Wang, Z., Tolbert, L.M., Blalock, B.J., Wang, F.: Active current balancing for parallel-connected silicon carbide MOSFETs. In: 2013 IEEE Energy Conversion Congress and Exposition, Denver, pp. 1563-1569 (2013)
  9. Li, H., Munk-Nielsen, S., Pham, C., Beczkowski, S.: Circuit mismatch influence on performance of paralleling silicon carbide MOSFETs. In: 2014 16th European Conference on Power Electronics and Applications, Lappeenranta, pp. 1-8 (2014)
  10. Chen, H., Divan, D.: High speed switching issues of high power rated silicon-carbide devices and the mitigation methods. In: 2015 IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, QC, pp. 2254-2260 (2015)
  11. Zhang, H., Tolbert, L.M., Ozpineci, B.: Impact of SiC devices on hybrid electric and plug-in hybrid electric vehicles. IEEE Trans. Ind. Appl. 47(2), 912-921 (2011) https://doi.org/10.1109/TIA.2010.2102734
  12. Liu, T., Ning, R., Wong, T.T.Y., Shen, Z.J.: Modeling and analysis of SiC MOSFET switching oscillations. IEEE J. Emerg. Select. Top. Power Electron. 4(3), 747-756 (2016) https://doi.org/10.1109/JESTPE.2016.2587358
  13. Sadik, D., Colmenares, J., Peftitsis, D., Lim, J., Rabkowski, J., Nee, H.: Experimental investigations of static and transient current sharing of parallel-connected silicon carbide MOSFETs. In: 15th European Conference on Power Electronics and Applications (EPE), Lille, pp. 1-10 (2013)
  14. Peftitsis, D., Baburske, R., Rabkowski, J., Lutz, J., Tolstoy, G., Nee, H.: Challenges regarding parallel connection of SiC JFETs. IEEE Trans. Power Electron. 28(3), 1449-1463 (2013) https://doi.org/10.1109/TPEL.2012.2206611
  15. Li, H., Munk-Nielsen, S., Beczkowski, S., Wang, X.: A novel DBC layout for current imbalance mitigation in SiC MOSFET multichip power modules. IEEE Trans. Power Electron. 31(12), 8042-8045 (2016) https://doi.org/10.1109/TPEL.2016.2562030
  16. Rabkowski, J., Peftitsis, D., Nee, H.: Parallel-operation of discrete SiC BJTs in a 6-kW/250-kHz DC/DC boost converter. IEEE Trans. Power Electron. 29(5), 2482-2491 (2014) https://doi.org/10.1109/TPEL.2013.2283083
  17. Wang, M., Luo, F., Xu, L.: A double-end sourced wire-bonded multichip SiC MOSFET power module with improved dynamic current sharing. IEEE J. Emerg. Select. Top. Power Electron. 5(4), 1828-1836 (2017) https://doi.org/10.1109/JESTPE.2017.2720731
  18. Wood, R.A., Salem, T.E.: Evaluation of a 1200-V, 800-A All-SiC dual module. IEEE Trans. Power Electron. 26(9), 2504-2511 (2011) https://doi.org/10.1109/TPEL.2011.2108670
  19. Li, H., et al.: Influences of device and circuit mismatches on paralleling silicon carbide MOSFETs. IEEE Trans. Power Electron. 31(1), 621-634 (2016) https://doi.org/10.1109/TPEL.2015.2408054
  20. Lim, J., Peftitsis, D., Rabkowski, J., Bakowski, M., Nee, H.: Analysis and experimental verification of the influence of fabrication process tolerances and circuit parasitics on transient current sharing of parallel-connected SiC JFETs. IEEE Trans. Power Electron. 29(5), 2180-2191 (2014) https://doi.org/10.1109/TPEL.2013.2281084
  21. Mao, Y., Miao, Z., Wang, C., Ngo, K.D.T.: Balancing of peak currents between paralleled SiC MOSFETs by drive-source resistors and coupled power-source inductors. IEEE Trans. Ind. Electron. 64(10), 8334-8343 (2017) https://doi.org/10.1109/TIE.2017.2716868
  22. Li, H., et al.: Influence of paralleling dies and paralleling half-bridges on transient current distribution in multichip power modules. IEEE Trans. Power Electron. 33(8), 6483-6487 (2018) https://doi.org/10.1109/TPEL.2018.2797326
  23. Ao, J., Wang, Z., Chen, J., Peng, L., Chen, Y.: The cost-efficient gating drivers with master-slave current sharing control for parallel SiC MOSFETs. In: 2018 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), Bangkok, pp. 1-5 (2018)
  24. Mao, Y., Miao, Z., Wang, C., Ngo, K.D.T.: Passive balancing of peak currents between paralleled MOSFETs with unequal threshold voltages. IEEE Trans. Power Electron. 32(5), 3273-3277 (2017) https://doi.org/10.1109/TPEL.2016.2646323
  25. Bertelshofer, T., Maerz, A., Bakran, M.: Derating of parallel SiC MOSFETs considering switching imbalances. In: PCIM Europe 2018; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nuremberg, Germany, pp. 1-8 (2018)
  26. Wang, G., Mookken, J., Rice, J., Schupbach, M.: Dynamic and static behavior of packaged silicon carbide MOSFETs in paralleled applications. In: 2014 IEEE applied power electronics conference and exposition-APEC 2014, Fort Worth, TX, pp. 1478-1483 (2014)
  27. Kelner, G., Shur, M.S., Binari, S., Sleger, K.J., Kong, H.: High-transconductance beta-SiC buried-gate JFETs. IEEE Trans. Electron Devices 36(6), 1045-1049 (1989) https://doi.org/10.1109/16.24346
  28. Kokosis, S.G., Andreadis, I.E., Kampitsis, G.E., Pachos, P., Manias, S.: Forced current balancing of parallel-connected SiC JFETs during forward and reverse conduction mode. IEEE Trans. Power Electron. 32(2), 1400-1410 (2017) https://doi.org/10.1109/TPEL.2016.2553133
  29. Baliga, B.J.: Fundamentals of power semiconductor devices. Springer, North Carolina (2008)
  30. Alpaydin, E.: Introduction to machine learning: selected papers of Lionel W. McKenzie, Chapter 1-2, pp. 2-47. MIT Press, Cumberland (2016)
  31. Muller, A.C., Guido, S.: Introduction to machine learning with Python: a guide for data scientists. Chapter 2, pp. 33-55. Oreilly, Sebastopol (2017)
  32. Bishop, C.M.: Pattern recognition and machine learning. Chapter 3, pp. 137-147. Springer Science+Business Media, LLC, Singapore (2006)
  33. Andrew, N.: Class Lecture, Topic: "Supervised learning". CS229, Computer Science Department, Stanford University, Stanford, California, Fall 2018 [pdf document], pp. 3-11. Retrieved from http://cs229.stanford.edu/notes/cs229-notes1.pdf
  34. Kim, P.: Matlab deep learning with machine learning, neural networks and artificial intelligence. Chapter 1, pp. 1-17. Apress, Seoul (2017)
  35. Haihong, Q., et al.: Influences of circuit mismatch on paralleling silicon carbide MOSFETs. In: 2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA), Siem Reap, pp. 556-561 (2017)
  36. Abuogo, J., Zhao, Z., Ke, J.: Linear regression model for screening SiC MOSFETs for paralleling to minimize transient current imbalance. In: 2019 The 5th International Conference on Electrical Engineering, Control and Robotics, Guangzhou, China (2019)
  37. Ke, J., Zhao, Z., Sun, P., Huang, H., Abuogo, J., Cui, X.: Chips classification for suppressing transient current imbalance of parallel-connected silicon carbide MOSFETs. In: IEEE Transactions on Power Electronics
  38. La Mantia, S., Abbatelli, L., Brusca, C., Melito, M., Nania, M.: Design rules for paralleling of silicon carbide power MOSFETs. In: PCIM Europe 2017, Nuremberg, Germany, pp. 1-6 (2017)