한국건설순환자원학회논문집 (Journal of the Korean Recycled Construction Resources Institute)

한국건설순환자원학회 (Korean Recycled Construction Resources Institute)
권호 표지
DOI QR코드

DOI QR Code

메틸렌블루 용액을 이용한 광촉매 혼입 모르타르의 방오성능 평가

Self-Cleaning of Mortar Mixed with Photocatalyst by Using Methylene Blue Solution

  • Yang, In-Hwan (Department of Civil Engineering, Kunsan National University) ;
  • Park, Ji-Hun (Department of Civil Engineering, Kunsan National University) ;
  • Park, Hee-Woong (Department of Civil Engineering, Kunsan National University) ;
  • Jung, Hoe-Won (Department of Civil Engineering, Kunsan National University)
  • 투고 : 2020.08.19
  • 심사 : 2020.09.08
  • 발행 : 2020.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 광촉매를 혼입한 모르타르의 방오성능을 평가하기 위해 메틸렌 블루를 이용한 실험 연구를 수행하였다. 실험 시편은 시멘트 중량대비 2.5%, 5.0%, 7.5% 및 10.0%의 광촉매를 혼입하여 모르타르 시편을 제작하였고, 시편 표면에 스크래치 형태로 조도를 설정하였다. 표면 조도는 3가지로 조도가 없는 경우, 조도가 작은 경우(중간 조도), 조도가 큰 경우(거친 조도)로 설정하였다. 모르타르 시편 제작 후 24시간 동안 자외선램프 조사와 12시간 동안 메틸렌 블루 컨디셔닝 용액에 침지 하는 전처리 과정을 진행하였다. 실험챔버에 전처리가 완료된 모르타르 시편을 배치 후 48시간 동안 자외선램프를 조사하였고 시간에 따라 메틸렌 블루 수용액의 색 변화를 분광측색계를 이용하여 측정하였다. 광촉매의 혼입량이 증가할수록 메틸렌 블루 색 변화는 증가하는 경향을 나타내며 이는 방오성능이 증가하는 것을 의미한다. 반면에 표면조도가 증가할수록 메틸렌 블루 용액의 색 변화는 뚜렷한 경향은 나타내지 않으며 표면의 광촉매 분포가 일정하지 않기 때문이다.

An experimental study to investigate the effect of self-cleaning of mortar mixed with photocatalyst was performed out in this study. Test parameters included the photocatalyst content and surface roughness of the specimens. The experimental mortar specimens were manufactured by mixing a photocatalyst by cement weight of 2.5%, 5.0%, 7.5% and 10.0%. In addition, the surface roughness was categorized into three cases. They included flat surface condition, little surface roughness(medium roughness), and high surface roughness. After mortar specimens were cured for 28 days, they were illuminated by an ultraviolet lamp for 24 hours and immersed in a methylene blue conditioning solution for 12 hours. Thereafter, an ultraviolet(UV) lamp was illuminated on the specimens for 48 hours in an experimental chamber and then the color change of methylene blue solution was measured by using a spectrophotometer over illuminating time of UV lamp. The color change of methylene blue tended to increase as photocatalyst contents increased. Test results meant that photocatalyst was effective for self-cleaning in mortar. However, the color change of the methylene blue solution did not show a noticeable tendency at different surface roughness conditions. It might be due to the uneven photocatalyst distribution on the surface of mortar specimens.

키워드

참고문헌

  1. Bengtsson, N., Castellote, M. (2014). Heterogeneous photocatalysis on construction materials: effect of catalyst properties on the efficiency for degrading NOx and self cleaning, Materiales de Construcción, 64(314). 13.
  2. Faraldos, M., Kropp, R., Anderson, M.A., Sobolev, K. (2015). Photocatalytic hydrophobic concrete coatings to combat air pollution, Catalysis Today, 259, 228-236. https://doi.org/10.1016/j.cattod.2015.07.025
  3. Folli, A., Jakobsen, U.H., Guerrini, G.L., Macphee, D.E. (2009). Rhodamine B discolouration on TiO2 in the cement environment: a look at fundamental aspects of the self-cleaning effect in concretes, Journal of Advanced Oxidation Technologies, 12(1), 126-133. https://doi.org/10.1515/jaots-2009-0116
  4. Folli, A., Pade, C., Hansen, T.B., Marco, T.D., Macphee, D.E. (2012). $TiO_2$ photocatalysis in cementitious systems: insights into self-cleaning and depollution chemistry, Cement and Concrete Research, 42, 539-548. https://doi.org/10.1016/j.cemconres.2011.12.001
  5. Guo, M.Z., Ling, T.C., Poon, C.S. (2017). Photocatalytic NOx degradation of concrete surface layers intermixed and spray-coated with Nano-$TiO_2$: influence of experimental factors, Cement and Concrete Composites, 83, 279-289. https://doi.org/10.1016/j.cemconcomp.2017.07.022
  6. Guo, M.Z., Poon, C.S. (2013). Photocatalytic NO removal of concrete surface layers intermixed with $TiO_2$, building and environment, 70, 102-109. https://doi.org/10.1016/j.buildenv.2013.08.017
  7. Husken, G., Hunger, M., Brouwers, H.J.H. (2009). Experimental study of photocatalytic concrete products for air purification, Building and Environment, 44, 2463-2474. https://doi.org/10.1016/j.buildenv.2009.04.010
  8. Jimenez-Relinque, E., Rodriguez-Garcia, J.R., Castillo, A., Castellote, M. (2015). Characteristics and efficiency of photocatalytic cementitious materials: type of binder, roughness and microstructure, Cement and Concrete Research, 71, 124-131. https://doi.org/10.1016/j.cemconres.2015.02.003
  9. KS L 5105 (2007). Testing Method for Compressive Strength of Hydraulic Cement Mortars, Korea Industrial Standards [in Korean].
  10. KS L 5109 (2017). Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, Korea Industrial Standards [in Korean].
  11. KS L 5111 (2017). Flow Table for Use in Tests of Hydraulic Cement, Korea Industrial Standards [in Korean].
  12. KS L ISO 10678 (2012). Fine Ceramics(Advanced Ceramics, Advanced Technical Ceramics) - Determination of Photocatalytic Activity of Surface in an Aqueous Medium by Degradation of Methylene Blue, Korea Industrial Standards [in Korean].
  13. KS L ISO 679 (2006). Methods of Testing Cements - Determination of Strength, Korea Industrial Standards [in Korean].
  14. Macphee, D.E., Folli, A. (2016). Photocatalytic concretes - the interface between photocatalysis and cement chemistry, Cement and Concrete Research, 85, 48-54. https://doi.org/10.1016/j.cemconres.2016.03.007
  15. Nath, R.K., Zain, M.F.M., Kadhum, A.A.H., Kaish, A.B.M.A. (2014). An investigation of $LiNbO_3$ photocatalyst coating on concrete surface for improving indoor air quality, Construction and Building Materials, 54, 348-353. https://doi.org/10.1016/j.conbuildmat.2013.12.072
  16. Park, G.J., Park, J.J., Kwak, J.W., Kim, S.W. (2019). Research on the efficient manufacturing method of photocatalyst concrete according to the type and mixing ratio of photocatalyst, Journal of the Korea Institute for Structural Maintenance and Inspection, 23(4), 69-77 [in Korean].
  17. Ruot, B., Plassais, A., Olive, F., Guillot, L., Bonafous, L. (2009). $TiO_2$-containing cement pastes and mortars: measurements of the photocatalytic efficiency using a rhodamine B-based colourimetric test, Solar Energy, 83, 1794-1801. https://doi.org/10.1016/j.solener.2009.05.017
  18. Shen, W., Zhang, C., Li, Q., Zhang, W., Cao, L., Ye, J. (2015). Preparation of titanium dioxide nano particle modified photocatalytic self-cleaning concrete, Journal of Cleaner Production, 87, 762-765. https://doi.org/10.1016/j.jclepro.2014.10.014
  19. Yang, L., Hakki, A., Wang, F., Macphee, D.E. (2018). Photocatalyst efficiencies in concrete technology: the effect of photocatalyst placement, Applied Catalysis B: Environmental, 222, 200-208. https://doi.org/10.1016/j.apcatb.2017.10.013