DOI QR코드

DOI QR Code

저회의 입도변화에 따른 CLSM의 공학적특성

Engineering Characteristics of CLSM with Regard to the Particle Size of Bottom Ash

  • Lee, Yongsoo (Department of Civil Engineering, Korea National University of Transportation) ;
  • Kim, Taeyeon (Department of Civil Engineering, Korea National University of Transportation) ;
  • Lee, Bongjik (Department of Civil Engineering, Korea National University of Transportation)
  • 투고 : 2020.07.21
  • 심사 : 2020.09.30
  • 발행 : 2020.10.01

초록

해양투기 금지와 같은 여러 환경적 제약으로 인해 산업부산물의 재활용에 대한 요구가 증가함에 따라 이들의 재활용에 대한 다양한 연구가 진행되고 있다. 이 중 석탄회는 화력발전에 따른 산업부산물로 석탄회중 비회의 재활용을 위한 연구는 활발히 진행되어 다방면에서 재활용되는 반면 저회의 경우에는 발생량의 일부분만 2~4mm 또는 2mm 이하의 입도로 1차 가공하여 주로 원예용 및 경량골재 등에 사용되고 대부분은 회처리장에 매립됨에 따라 저회의 활용방안을 모색하기 위한 다양한 연구가 필요한 실정이다. 이에 본 연구에서는 CLSM의 골재로 활용하기 위한 저회의 최적입도와 혼합비를 도출하기 위하여 화강풍화토와 저회의 혼합비, 혼합되는 저회의 입도 및 고결제 첨가율에 따라 제작된 CLSM을 대상으로 유동특성, 강도변화 특성 등을 구명하고, 중금속 검출시험을 수행하여 CLSM 골재로 저회의 활용성을 평가하였다.

As the demand for the recycling of industrial by-products increases due to various environmental restrictions including the prohibition of ocean disposal, various studies regarding the recycling of industrial by-products are currently being carried out. One of the industrial by-product, coal ash is produced from thermal power generation; studies on the recycling of fly ash have been actively carried out and it is currently recycled in various fields. In the case of bottom ash, however, only a portion of the total amount generated is primarily processed into a particle size of 2~4mm or less than 2mm to be used for gardening purpose and light weight aggregate and so on. The remaining amount is buried at ash disposal sites. Therefore, various studies are needed to develop measures to use bottom ash. This study aimed at identifying the optimal particle size and mixing ratio of bottom ash to be used as CLSM aggregate. To this end, it evaluated the usability of bottom ash as CLSM aggregate, by investigating the flowability and strength change characteristics of CLSM produced with regard to the mixing ratio of weathered granite soil and bottom ash, particle size of bottom ash to be mixed and soil binder addition rate and conducting a heavy metal leaching test.

키워드

참고문헌

  1. ACI Committee 229 (2005), Controlled low strength materials (CLSM), American Concrete Insitute, 229R-2, pp. 1-12.
  2. ASTM D 6103 (2004), Standard test method for flow consistency of controlled low strength material (CLSM), West conshohocken, PA, pp. 1-3.
  3. Japan Civil Engineering Research Institute (2007), Technical Notes of Fluidization Surplus Soil.
  4. Kang, S. H., Ryu, Y. S. and Han, J. G. (2019), "Tunnel filling method using rapid hardening high flow CLSM (Controlled Low Strength Material)", Magazine of the Korea Concrete Institute, Vol. 31, No. 5, pp. 48-56 (In Korean).
  5. Koh, T. H., Lee, S. G., Shin, M. H., Kim, B. S., Lee, J. K. and Lee, T. Y. (2010), "Evaluation for contents of contaminants and leaching characteristics of bottom ash", Journal of the Korean Geo-Environmental Society, Vol. 11, No. 6, pp. 77-83 (In Korean).
  6. Lin, D. F., Luo, H. L., Wang, H. Y. and Hung, M. J. (2007), "Successful application of CLSM on a weak pavement base/ subgrade for heavy truck traffic", Jounal of Performance of Constructed Facilities, Vol. 21, No. 1, pp. 70-77. https://doi.org/10.1061/(ASCE)0887-3828(2007)21:1(70)
  7. Oh, S. W., Kim, H. S., Bang, S. T. and JO, H. D. (2016), "Evaluation on the effect of soil pavement mixsing friendlysoil binder", Annual Conference of Korean Geo-Environmental Society, Vol. 17, No. 3, pp. 18-25 (In Korean).
  8. Park, G. H., Kim, T. Y., Lee, Y. S. and Lee, B. J. (2019a), "Engineering characteristics of CLSM using bottom ash and ecofriendly soil binder", Journal of the Korean Geo-Environmental Society, Vol. 20, No. 5, pp. 23-29 (In Korea). https://doi.org/10.26511/JKSET.20.1.4
  9. Park, J. J., Lee, I. H., Shin, E. C. and Hong, G. W. (2019b), "A study on unconfined compressive strength of CLSM with paper sludge ash", Jornal of Korean Geosynthetics Society, Vol. 18, No. 4, pp. 253-262 (In Korea).