디지털융복합연구 (Journal of Digital Convergence)

  • 제18권9호
  • /
  • Pages.125-133
  • /
  • 2020
  • /
  • 2713-6434(pISSN)
  • /
  • 2713-6442(eISSN)
한국디지털정책학회 (The Society of Digital Policy and Management)
권호 표지
DOI QR코드

DOI QR Code

기업역량이 스마트 팩토리 수용의도 및 경영성과에 미치는 영향 -지역특성을 조절변수로-

The Effect of Corporate Competency on Smart Factory Acceptance Intention and Management Performance -moderating effect of regional characteristics-

  • 김상문 (신용보증기금) ;
  • 유연우 (한성대학교 스마트 경영공학 컨설팅 트랙)
  • Kim, Sang-Moon (Korea Credit Guarantee Fund) ;
  • You, Yen-Yoo (Dept. of Consulting Track of Division of Smart Management Engineering, Hansung University)
  • 투고 : 2020.07.14
  • 심사 : 2020.09.20
  • 발행 : 2020.09.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 중소 제조기업의 스마트 팩토리 구축 관련 대표 및 직원역량과 스마트 팩토리 수용의도 그리고 경영성과 사이의 영향관계를 확인하고 중소 제조기업의 스마트 팩토리 도입과 관련한 전략적 함의를 도출하기 위해 실시하였다. 중소 제조기업 중 스마트 팩토리를 도입한 기업을 대상으로 설문조사를 통해 수집된 310부의 자료를 바탕으로 요인분석, 신뢰성 및 타당성 분석을 실시하여 최종 확정된 연구 모형에 대해 구조방정식모형(SEM)분석으로 연구가설 검정을 실시하였다. 연구 결과, 대표 및 직원역량은 스마트 팩토리 수용의도에 유의한 영향을 미치고, 직원역량은 경영성과에 유의한 영향을 미치는 것을 확인되었다. 수용의도는 경영성과에 정의 영향을 미치고, 지역특성은 대표역량, 수용의도 및 경영성과 사이의 관계에 조절효과가 있는 것으로 확인되었다. 본 연구를 통해 기업역량은 스마트 팩토리 수용의도에 영향을 주는 주요 요인이며, 지역특성은 대표역량과 스마트 팩토리 도입의도 그리고 경영성과 간의 경로에 유의한 조절작용을 하는 것으로 나타났다. 향후 중소 제조기업 스마트 팩토리 수준별 연구와 업종, 규모에 따른 스마트 팩토리 도입기업의 특성 연구가 요구된다.

This study confirms the impact relationship between the president and employee competency related to smart factory construction of manufacturing SMEs, the acceptance intention and management performance in smart factory construction. The 310 data collected through a questionnaire were tested for research hypotheses through SEM. As a result, the president and employee competency affects the smart factory acceptance intention and the employee competency affects the management performance. Acceptance intention has a positive impact on management performance. Regional characteristics have a moderating effect on the relationship between president competency, acceptance intention, and management performance. Through this study, it was confirmed that the president and employee competency was an important factor in smart factory built.

키워드

참고문헌

  1. Smart Manufacturing Innovation Promotion Team. (2019). https://www.smart-factory.kr/insttIntrcnInfo.
  2. Joint Related ministry. (2015). Manufacturing Innovation 3.0 Strategy Action Plan.
  3. J. P. Park.(2017). Analysis of Smart Factory Success Cases in the Industry 4.0 Era: Targeting Domestic Large, Small, and Small Companies. Journal of Digital Convergence 15.5, 107-115. DOI : 10.14400/JDC.2017.15.5.107
  4. S. I. Kwon. (2019). Episode Study on Key Success Factors and Corporate Performance of Smart Factory Introduction-Focusing on Small and Medium: sized Manufacturing Companies in Korea. Doctoral dissertation. Dankook University, Gyeonggi.
  5. J. H. Oh. (2019). Smart Factory Strategic Utilization Study: The Impact of Purpose and Content of Construction on Sustainable Use. Doctoral dissertation, Chungbuk National University. Chungbuk.
  6. B. C. Bae. (2017). The effect of the technological factors of the smart factory on the management performance: focusing on the beneficiaries of the smart factory support project. Master's dissertation, Hanyang University. Seoul.
  7. H. C. Gil. (2019). An empirical study to analyze factors and performance of smart factories: focusing on TOE and IS success models. Doctoral dissertation, Hansung University. Seoul.
  8. G. T. Lee. (2016). Smart factory Technology trends and R&D roadmap. Electronic Engineering Journal, Vol.43, No.6, 16-4.
  9. M. S. Im. (2016). Convergence of Manufacturing Industry and Information and Communication Technology: Korean Manufacturing 3.0 Success Strategy Based on Smart Factory 4.0. Journal of Digital Convergence 14.3, 219-226. DOI : 10.14400/JDC.2016.14.3.219
  10. S. H. Min. (2017). Weekly KDB Report, 1-6.
  11. L. M. Spencer & S. M. Spencer. (1998). Competence at Work. New York: Wiley.
  12. M. R. Baeg. (2014). Analysis of educational demands on the capabilities of veterans' managers, Master's thesis, Korea Polytechnic University. Incheon.
  13. I. Diericks. & K. Cool. (1989). Asset stock accumulation and sustainability of competitive advantage. Management Science 4(1), 1504-1511.
  14. S. K. Widener. (2007). An empirical analysis of the levers of control framework. Accounting, Organizations and Society, 32(7-8), 757-788. https://doi.org/10.1016/j.aos.2007.01.001
  15. K. W. Kim. (2016). A study on factors affecting SMEs' acceptance of the Internet of Things-by applying the Unified Technology Acceptance Theory(UTAUT). Doctoral dissertation, Han Se University. Gyeonggi.
  16. L. G. Tornatzky. & M. Fleischer. (1980). The Process of Technological Innovation, Lexington, MA: Lexington Books.
  17. J. D. Kim, S, Y. Ji & K. H. You. (2018). A Study on Factors Influencing the Performance of External Manufacturing Big Data Technology Transfer in Small and Medium-sized Manufacturing Enterprises: A Case of Technology Transfer by Korea Electronics and Telecommunications Research Institute. Information Technology Architecture Research, 15(3), 307-327.
  18. B. U. So & S. S. Shin. (2017). Establishing a smart factory using sensors and virtual process design. The Korean Society for Electronic Communication Science, Vol.12, No.6, 1071-1080.
  19. A. Kumar. (2018). Methods and Materials for Smart Manufacturing: Additive Manufacturing, Internet of Things, Flexible Sensors and Soft Robotics, Manufacturing Letters, 15, 122-125. https://doi.org/10.1016/j.mfglet.2017.12.014
  20. M. G. Kim. (2019). The Mediating Effect of the Industrial Structures of Regions in terms of the Influence of Region-Centrism on the Regional Economic Growth of the Central City. Doctoral Dissertation, Jungang University. Seoul.
  21. S. O. Park. (2015). Analysis of impact structure on the Regional Competitiveness of Region-Specialized Industries. Doctoral Dissertation, Hanyang University. Seoul.
  22. H. J. Jo & Y. G. Kim. (2018). Smart factory technology and industry trends. Information and Communication Technology Promotion Center.
  23. S. T. Kim. (2017). Considerations for the successful introduction of smart factory. Deloitte Anjun Accounting Corporation, Strategy Consulting Group.
  24. H. K. Kim. (2019). An Empirical Study on the Sustaining Intention and Conversion Intention of Smart Factory. Doctoral Dissertation, Pusan National University. Pusan.
  25. J. Y. Choo. & D. H. Lee. (2018). Influence of Smart Factory's energy management system acceptance and diffusion factors on employees' resistance to innovation and work performance. Journal of Digital Convergence 16.1, 103-116. DOI : 10.14400/JDC.2018.16.1.103
  26. J. S. Park. (2019). Analysis on the relationship between the willingness and implementation of smart factory construction : focusing on the moderating effect of government subsidies and corporate contributions. Master's dissertation, Pusan National University. Pusan.
  27. Y. R. Lee. (2019). Analysis on the effect of entrepreneurship characteristics of small and medium-sized entrepreneurs on business performance: mediated by entrepreneurship and social capital. Doctoral dissertation, Mokpo National University. Junnam.
  28. J. H. Jeong. (2010). A study on the effect of entrepreneurship and competence levels on corporate performance: focusing on start-up incubators. Master's dissertation, Chung-Ang University. Seoul.
  29. K. H. Lee. (2017). Effects of employee competency on job satisfaction and organizational commitment: focusing on pharmaceutical company employees. Master's dissertation, Kyunghee University. Seoul.
  30. H. B. Na. (2018). A study on the methodology of the process/facilities sector for the establishment of a smart factory for small and medium-sized enterprises. Master's dissertation, Gongju University. Chungnam.
  31. H. S. Lee. (2017). A Study on Financial Performance of Award-winning Company of Quality Competitiveness. Doctoral Dissertation, Kangwon National University. Kangwon.
  32. G. G. Shin. (2016). Following AMOS 23 Statistical Analysis focusing on Master's and Doctoral degree and Academic thesis Writing, Seoul : Chung Ram.