References
- Bannon, H., Irvine, H. M., and Biggs, J. M. (1981), Seismic damage in reinforced concrete frames, Journal of the Structural Division, 107(9), 1713-1729. https://doi.org/10.1061/JSDEAG.0005778
- Cheng, Z. B., and Shi, Z. F. (2018), Composite periodic foundation and its application for seismic isolation, Earthquake Engineering and Structural Dynamics, 47(4), 925-944. https://doi.org/10.1002/eqe.2999
- Choi, H. S., Cheung, J. H., Gae, M. S., Seo, Y. D., and Kim, M. K. (2013), Seismic capacity test of nuclear piping system using multi-platform shake table, Journal of the Earthquake Engineering Society of Korea, 17, 21-31. https://doi.org/10.5000/EESK.2013.17.1.021
- Firoozabad, E. S., Jeon, B. G., Choi, H. S., and Kim, N. S. (2015), Seismic fragility analysis of seismically isolated nuclear power plants piping system, Nuclear Engineering and Design, 284, 264-279. https://doi.org/10.1016/j.nucengdes.2014.12.012
- Gersak, J. (1989), Study of the yield point of the thread, International Journal of Clothing Science and Technology, 10(3/4), 244-251. https://doi.org/10.1108/09556229810693654
- Jang, H. W., Hahm, D. G., Jung, J. W., and Hong, J. W. (2018), Effective numerical approach to assess low-cycle fatigue behavior of pipe elbows, Nuclear Engineering and Technology, 50(5), 758-766. https://doi.org/10.1016/j.net.2018.01.020
- Jeon, B. G., Kim, S. W., Choi, H. S., Park, D. U., and Kim, N. S. (2017), A failure estimation method of steel pipe elbows under in-plane cyclic loading, Nuclear Engineering and Technology, 49(1), 245-253. https://doi.org/10.1016/j.net.2016.07.006
- Kasahara, N., Nakamura, I., Machida, H., and Nakamura, H. (2014), Research plan on failure modes by extreme loadings under design extension conditions, ASME 2014 Pressure Vessels and Piping Conference, Anaheim, California, USA, PVP2014-28349.
- Kim, S. W., Choi, H. S., Jeon, B. G., and Hahm, D. G. (2019b), Low-cycle fatigue behaviors of the elbow in a nuclear power plant piping system using the moment and deformation angle, Engineering Failure Analysis, 96, 348-361. https://doi.org/10.1016/j.engfailanal.2018.10.021
- Kim, S. W., Choi, H. S., Jeon, B. G., Hahm, D. G., and Kim, M. K. (2018), Strain and deformation angle for a steel pipe elbow using image measurement system under in-plane cyclic loading, Nuclear Engineering and Technology, 50(1), 190-202. https://doi.org/10.1016/j.net.2017.11.001
- Kim, S. W., Jeon, B. G., Cheung, J. H., and Kim, S. D. (2019c), Low-cycle Fatigue Behaviors of the Steel Pipe Tee of a Nuclear Power Plant Using Image Signals, Journal of the Korea Institute for Structural Maintenance and Inspection, 23(6), 77-83.
- Kim, S. W., Jeon, B. G., Hahm, D. G., and Kim, M. K. (2019a), Seismic fragility evaluation of the base-isolated nuclear power plant piping system using the failure criterion based on stress-strain, Nuclear Engineering and Technology, 51(2), 561-572 https://doi.org/10.1016/j.net.2018.10.006
- Kiran, A. R., Reddy, G. R., and Agrawal, M. K. (2018), Experimental and numerical studies of inelastic behavior of thin walled elbow and tee joint under seismic load, Thin-Walled Structures, 127, 700-709. https://doi.org/10.1016/j.tws.2018.03.010
- Nakamura, I., Otani, A., and Shiratori, M. (2010), Comparison of failure modes of piping systems with wall thinning subjected to in-plane, out-of-plane, and mixed mode bending under seismic load: An experimental approach, Journal of Pressure Vessel Technology, 132, 031001. https://doi.org/10.1115/1.4001517
- Ravi Kiran, A., Reddy, G. R., and Agrawal, M. K. (2019), Seismic fragility analysis of pressurized piping systems considering ratcheting: A case study, International Journal of Pressure Vessels and Piping, 169, 26-36. https://doi.org/10.1016/j.ijpvp.2018.11.013
- Takahashi, K., Watanabe, S., Ando, K., Hidaka, A., Hisatsune, M., and Miyazaki, K. (2009), Low cycle fatigue behaviors of elbow pipe with local wall thinning, Nuclear Engineering Design, 239, 2719-2727. https://doi.org/10.1016/j.nucengdes.2009.09.011
- Urabe, Y., Takahashi, K., and Ando, K. (2012), Low cycle fatigue behavior and seismic assessment for elbow pipe having local wall thinning, Journal of Pressure Vessel Technology, 134, 041801. https://doi.org/10.1115/1.4005870
- Urabe, Y., Takahashi, K., Sato, K., and Ando, K. (2013), Low cycle fatigue behavior and seismic assessment for pipe bend having local wall thinning-influence of internal pressure, Journal of Pressure Vessel Technology, 135, 2-6.
- Varelis, G. E., and Karamanos, S. A. (2015), Low-cycle fatigue of pressurized steel elbows under in-plane bending, Journal of Pressure Vessel Technology, 137, 011401. https://doi.org/10.1115/1.4027316
- Xu, Z. D., Ge, T., and Miao, A. (2019), Experimental and theoretical study on a novel multi-dimensional vibration isolation and mitigation device for large-scale pipeline structure, Mechanical Systems and Signal Processing, 129, 546-567. https://doi.org/10.1016/j.ymssp.2019.04.054
- Yu, C. C., Nolisetti, C., Coleman, J. L., Kosbab, B., and Whittaker, A. S. (2018), Using seismic isolation to reduce risk and capital cost of safety-related nuclear structures, Nuclear Engineering and Design, 7, 268-284.