DOI QR코드

DOI QR Code

Optimum design of stiffened plates for static or dynamic loadings using different ribs

  • Virag, Zoltan (Institute of Mining and Geotechnical Engineering, University of Miskolc) ;
  • Jarmai, Karoly (Institute of Energy Engineering and Chemical Machinery, University of Miskolc)
  • 투고 : 2017.08.10
  • 심사 : 2019.12.15
  • 발행 : 2020.04.25

초록

The main requirements of modern welded metal structures are the load-carrying capacity (safety), fitness for production, and economy. The primary objective of attaching longitudinal stiffeners is to improve the buckling strength of relatively thin compression panels. This paper gives several comparisons for stiffened plates with different loadings (static, dynamic), different shape of stiffeners (flat, L-shape, trapezoidal), different steel grades, and different welding technologies (SMAW, GMAW, SAW), different costs to show the necessity of a combination of design, fabrication and economic aspects. Safety and fitness for production are guaranteed by fulfilling the design and fabrication constraints. The economy is achieved by minimizing the cost function. It is shown that the optimum sizes depend on the welding technology, the material yield stress, the profile of the stiffeners, the load cycles and the place of the production.

키워드

과제정보

The research was supported by the EFOP-3.6.1-2016- 16-00011 "Younger and Renewing University - Innovative Knowledge City - institutional development of the University of Miskolc aiming at intelligent specialisation" project implemented in the framework of the Széchenyi 2020 program. The realization of this project is supported by the European Union, co-financed by the European Social Fund.

참고문헌

  1. American Petroleum Institute API (1987), Bulletin on design of flat plate structures. Bulletin 2V. Washington.
  2. Bourada M., A. Bouadi, A.A. Bousahla, A. Senouci, F. Bourada, A. Tounsi and S.R. Mahmoud (2019), "Buckling behavior of rectangular plates under uniaxial and biaxial compression", Struct. Eng. Mech., 70(1), 113-123. https://doi.org/10.12989/sem.2019.70.1.113
  3. COSTCOMP (1990), Programm zur Berechnung der Schweisskosten. Deutscher Verlag fur Schweisstechnik, Dusseldorf.
  4. Eurocode 3 (2005), Design of Steel Structures -Part 1-9: Fatigue; European Committee for Standardization (CEN).
  5. Faiza K., D. Lamia, S. Mohamed, T. Abdelouahed and Mahmoud S.R. (2017), "An original single variable shear deformation theory for buckling analysis of thick isotropic plates", Struct. Eng. Mech., 63(4), 439-446, https://doi.org/10.12989/sem.2017.63.4.439
  6. Farkas J., Jarmai K. (1997), Analysis and Optimum Design of Metal Structures. Balkema, Rotterdam-Brookfield.
  7. Farkas J., Jarmai K. (2000), "Minimum cost design and comparison of uniaxially compressed plates with welded flat-, L- and trapezoidal stiffeners", Welding in the World, 44(3), 47-51.
  8. Farkas J., Jarmai K. (2003), Economic Design of Metal Structures, Millpress, Rotterdam.
  9. Farkas J., Simoes M.C. and Jarmai K. (2005), "Minimum cost design of a welded stiffened square plate loaded by biaxial compression", Struct. Multidisciplinary Optimization, 29(4), 298-303. https://doi.org/10.1007/s00158-004-0385-0.
  10. Farkas J, Jarmai K. (2013), Optimum Design of Steel Structures, Springer Verlag, Heidelberg, Germany.
  11. Fernandes G.R. and Neto J.R. (2015), "Analysis of stiffened plates composed by different materials by the boundary element method", Struct. Eng. Mech., 56(4), 605-623. https://doi.org/10.12989/sem.2015.56.4.605
  12. Georgioudakis M., Lagaros N.D. and Papadrakakis M. (2017), "Probabilistic shape design optimization of structural components under fatigue", Comput. Struct., 182, 252-266. https://doi.org/10.1016/j.compstruc.2016.12.008
  13. Hadidi A. and Rafiee A. (2014), "Harmony search based, improved Particle Swarm Optimizer for minimum cost design of semi-rigid steel frames", Struct. Eng. Mech., 50(3), 323-347. https://doi.org/10.12989/sem.2014.50.3.323
  14. Hazim G. N., Jarmai K. (2019), "Kinematic-based structural optimization of robots", Pollack Periodica 14(3), 213-222. https://doi.org/10.1556/606.2019.14.3.20.
  15. Hooke, R.; Jeeves, T.A. (1961), "'Direct search' solution of numerical and statistical problems", J. Assoc. Comput. Machinery (ACM). 8(2), 212-229. https://doi.org/10.1145/321062.321069
  16. Jarmai K., Snyman J.A., Farkas J. (2006), "Minimum cost design of a welded orthogonally stiffened cylindrical shell", Comput. Struct., 84(12),787-797. https://doi.org/10.1016/j.compstruc.2006.01.002
  17. Ji Jin, Ding Xiaohong, Xiong Min (2014), "Optimal stiffener layout of plate/shell structures by bionic growth method", Comput. Struct., 135(15), 88-99. https://doi.org/10.1016/j.compstruc.2014.01.022
  18. Kaveh A., Kalateh-Ahani M. and Fahimi-Farzam M. (2014), "Life-cycle cost optimization of steel moment-frame structures: performance-based seismic design approach", Earthq. Struct., 7(3), 271-294. https://doi.org/10.12989/eas.2014.7.3.271
  19. Kaveh A., Fahimi-Farzam M. and Kalateh-Ahani M. (2015), "Optimum design of steel frame structures considering construction cost and seismic damage", Smart Struct. Syst., 16(1), 1-26. https://doi.org/10.12989/sss.2015.16.1.001
  20. Kim B.J., Y.M. Park, K. Kim and B.H. Choi (2019), "Web bend-buckling strength of plate girders with two longitudinal web stiffeners", Struct. Eng. Mech., 69(4), 383-397. https://doi.org/10.12989/sem.2019.69.4.383
  21. Kim H.S., Park Y.M., Kim B.J. and Kim K. (2018), "Numerical investigation of buckling strength of longitudinally stiffened web of plate girders subjected to bending", Struct. Eng. Mech., 65(2), 141-154. https://doi.org/10.12989/sem.2018.65.2.141
  22. Kovacs Gy., Farkas J. (2017), "Minimum cost design of overhead crane beam with box section strengthened by CFRP laminates", Struct. Eng. Mech., 61(4), 475-481. https://doi.org/10.12989/SEM.2017.61.4.475
  23. Mikami I, Niwa K. (1996), "Ultimate compressive strength of orthogonally stiffened steel plates", J. Struct. Engng ASCE, 122(6), 674-682. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:6(674)
  24. Mittelstedt C. (2008), "Explicit analysis and design equations for buckling loads and minimum stiffness requirements of orthotropic and isotropic plates under compressive load braced by longitudinal stiffeners", Thin-Wall. Struct., 46(12), 1409-1429. https://doi.org/10.1016/j.tws.2008.03.007
  25. Nguyen-Thoi T. et al. (2013), "Static, free vibration and buckling analyses of stiffened plates by CS-FEM-DSG3 using triangular elements", Comput. Struct., 125, 100-113. https://doi.org/10.1016/j.compstruc.2013.04.027
  26. Paik J.K., Thayamballi A.K., Kim B.J. (2001), "Large deflection orthotropic plate approach to develop ultimate strength formulations for stiffened panels under combined biaxial compression/tension and lateral pressure", Thin-Wall. Struct. 39(3), 215-246. https://doi.org/10.1016/S0263-8231(00)00059-8
  27. Kim D.K., Poh B.Y., Lee J.R. and Paik J.K. (2018), "Ultimate strength of initially deflected plate under longitudinal compression: Part I = An advanced empirical formulation", Struct. Eng. Mech., 68(2), 247-259. https://doi.org/10.12989/sem.2018.68.2.247
  28. Recommendations on Fatigue of Welded Components of the International Institute of Welding (2008), Doc. IIW-1823-07, ex. XIII-2151r4-07/XV-1254r4-07.
  29. Remil A., K.H. Benrahou, K. Draiche, A.A. Bousahla and A. Tounsi (2019), "A simple HSDT for bending, buckling and dynamic behavior of laminated composite plates", Struct. Eng. Mech., 70(3), 325-337. https://doi.org/10.12989/sem.2019.70.3.325
  30. Rosenbrock H.H. (1960), "An automatic method for finding the greatest or least value of a function", Comput. J., 3(3), 175-184. https://doi.org/10.1093/comjnl/3.3.175
  31. Simoes L.M.C., Farkas J, Jarmai K. (2015), "Optimization of a cylindrical shell housing a belt-conveyor bridge", Comput. Struct., 147(15), 159-164. https://doi.org/10.1016/j.compstruc.2014.09.015
  32. Tran K.L., Douthe C, Sab K, Dallot J, Davaine L. (2014), "Buckling of stiffened curved panels under uniform axial compression", Construct. Steel Res., 103,140-147. https://doi.org/10.1016/j.jcsr.2014.07.004
  33. Virag Z, Jarmai K. (2003), "Parametric studies of uniaxially compressed and laterally loaded stiffened plates for minimum cost", International Conference on Metal Structures (ICMS), Millpress, Rotterdam, 237-242.
  34. Virag Z. (2006), "Optimum design of stiffened plates", Pollack Periodica, 1(1), 77-92. https://doi.org/10.1556/Pollack.1.2006.1.6
  35. Yoo CH, Choi BH, Ford EM. (2001), "Stiffness requirements for longitudinally stiffened box-girder flanges", ASCE J. Struct. Eng., 127(6), 705-711. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:6(705)
  36. Zula T., Kravanja S. and Klansek U. (2016), "MINLP optimization of a composite I beam floor system", Steel Compos. Struct., 22(5), 1163-1192. https://doi.org/10.12989/scs.2016.22.5.1163