Journal of KIBIM (한국BIM학회 논문집)

Korean Institute of Building Information Modeling (한국BIM학회)
권호 표지
DOI QR코드

DOI QR Code

Developing a Drawing Template for BIM software to Improve BIM-based Drawing Work Efficiency in the Construction Document Phase

실시설계단계 BIM 기반 도면 작업 효율 향상을 위한 도면화 템플릿 개발

  • 김이제 (성균관대학교 미래도시융합공학과) ;
  • 김인채 (성균관대학교 미래도시융합공학과) ;
  • 진상윤 (성균관대학교 건설환경공학부/미래도시융합공학과)
  • Received : 2020.12.03
  • Accepted : 2020.12.07
  • Published : 2020.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Based on the prior research which developed the consistency review checklist of the BIM model and 2D drawing through the drawing analysis of the construction documents phase, the apparent limits of the existing template and the template development items were derived. As well, the BIM-based drawing templates of the construction documentation phase were developed and verified using ArchiCAD BIM software. The developed template was then applied to the actual project model in the construction documents phase, and, as a result, 50% of existing work elements could be utilized as templates. This is an increase of more than 30% over the existing template utilization elements, and it is analyzed to be effective in practical application and utilization. Based on the results of this study, if the BIM model construction criteria matching the drawing's utilization purpose are presented, while at the same time the BIM data interlocking and drawing template development studies are conducted, the utilization of BIM data can be maximized and additional drawing work can be minimized to increase the percentage of template utilization elements. In addition, it is believed that this can employed to address functional and institutional problems of BIM-based drawing and make a contribution to the activation of BIM.

Keywords

References

  1. Chae, K. S., Kim, E. Y., Jun, H. J., Lee, M. S., Kim. K. C., Choi, J. C., You, S. J. (2008). Research on Drawing Representation for BIM(Building Information Modeling), Journal of Computational Structural Engineering Institute of Korea, 21(1), pp. 470-475.
  2. Chae, K. S., Lee, G. (2011). A Study on the Problems and the Measurements for Improving Representations and Drafting Methods of Architectural Drawings by Adopting BIM, Journal of the architectural institute of korea Planning & Design, 27(10), pp. 67-74.
  3. Cho, Y. S. (2013). Study of architectural design implementation design drawings created using BIM software.
  4. Cho, Y. S., Lee, H. W. (2013). A Study on the Possibility of 2D Design Drawing Implementation by Revit Architecture, Journal of the Korea Academia-Industrial cooperation Society, 14(10), pp. 5243-5250. https://doi.org/10.5762/KAIS.2013.14.10.5243
  5. Choi, J. S. Kim, I. H., Cho, C. W., Choi, J. H. (2009). Application Status of Domestic Architectural Industry of Open BIM and Development Direction, Korean Journal of Computational Design and Engineering 14(6), pp. 355-363.
  6. Ju, J. K., Jun, H. J. (2010). The Concept Study of Template for BIM (Building Information Modeling), Journal of the Architectural Institute of Korea, 30(1), pp. 209-210.
  7. Kang, C., Koh, I. L. (2013) BIM Template research for step-by-step information sharing, Journal of the Architectural Institute of Korea, 33(2), pp. 59-60.
  8. Kang, H. J., Moon, S. Y., Lee, S. H., Jun, H. J. (2013). A Survey on Priority of Elements of Development of BIM Template for Small and Middle Architectural Design Firms, Journal of the architectural institute of korea Planning & Design, 29(3), pp. 117-124. https://doi.org/10.5659/JAIK_PD.2013.29.3.117
  9. Kim, M. K., Koh, I. L., Min, Y. G., Chung, T. S. (2019). A Study on the configuration and utilization of the schematic design BIM Template, Journal of the Korean Digital Architecture Interior Association, 13(3), pp. 51-58.
  10. Kim, Y. J., Kim. B. J., Chin, S. Y. (2018). A development of a checklist to check the consistency of BIM and drawings at the construction documentation phase, Journal of Korean Institute of Building Information of modeling, 8(1), pp. 33-42.
  11. Kwon, O. C., Jo, C. W. (2008). A Study on the Improvement of 2D Digital Drawing Standards Considering the Paradigm Shift to BIM, Journal of the architectural institute of korea Planning & Design 24(5), pp. 49-57.
  12. Kwon, S. H., Lee, W. J., Jo, C. W. (2013). Study for Architectural Standard Details Based On BIM Information Framework, Korean Journal of Computational Design and Engineering, 18(2). pp. 99-103.
  13. Lee, J. H., Lee, D. U. (2013). A Study on the introduction of template in Small Architectural Design Firms for using BIM, Journal of The Regional Association of Architectural Institute of Korea, 9(1), pp. 435-436.
  14. Lee, M. H., Seo, H. C., Kim, J. J. (2009). Study on the criteria of design drawing and shop drawing Standards based to BIM, Journal of Korea Institute of Construction Engineering and Management, pp. 646-649.
  15. Lee, S. H., Kim, M. K., Choi, H. A., Jun, H. A. (2011). A Study on Analysis of the Template Component for the Development of BIM Korea Institute of Ecological Architecture and Environment, 11(2), pp. 123-130.
  16. Oh, H. O., Jung, J. H., Lee, J. C. (2013). A Guideline for Structural Drawings Based on BIM, Journal of the architectural institute of korea Structure & Construction, 29(3), pp. 39-46. https://doi.org/10.5659/JAIK_SC.2013.29.3.39
  17. Oh, H. O., Kim, J. H., Kim, M. S., Lee, J. H., Jung, J. H(2011). The Study on the Structure Design Process and Modeling Guidelines Based on BIM, Journal of the architectural institute of korea Structure & Construction, 27(12), pp. 107-144.
  18. Park, S. M., Ryu, J. R., Woo, S. H., Choo, S. Y. (2016). A Proposal for Required Drawing Information Standard and Its Effectiveness for Writing BIM-Based Construction Consent Documents, Journal of the Regional Association of Architectural Institute of Korea, 18(2), pp. 19-27.
  19. Seo, M. B., Ju, K. B., Kim, N. G. (2013). Analysis of Substitutability of 2D Electronic Drawing Using the BIM Mode l-Focusing on the Electronic Delivery System in Road Field-, Journal of the korea contents association, 13(11), pp. 441-450. https://doi.org/10.5392/JKCA.2013.13.11.441
  20. Seo, Y. H., Kim, D. P., Moon, H. G. (2016). Development of BIM Templates for Vest-Pocket Park Landscape Design, Journal of the Korean Institute of Landscape Architecture, 44(1), pp. 40-50. https://doi.org/10.9715/KILA.2016.44.1.040
  21. Yang, H. M. (2012). A Study on the Development of Template for BIM-based Architectural Design.