참고문헌
- R. Khazaka, L. Memdizabal, D. Hevry, and R. Hanna, "Survey of High-Temperature Reliability of Power Electronics Packaging Components", IEEE Trans. Power Electron., 30(5), 2456 (2015). https://doi.org/10.1109/TPEL.2014.2357836
- D.-H. Jung, M.-H. Roh, J.-H. Lee, K.-H Kim, and J. P. Jang, "Transient Liquid Phase (TLP) Bonding of Device for High Temperature Operation", J. Microelectron. Packag. Soc., 24(1), 17 (2017). https://doi.org/10.6117/kmeps.2017.24.1.017
- J.-H. Lee, D.-H. Jung, and J. P. Jung, "Transient Liquid Phase Diffusion Bonding Technology for Power Semiconductor Packaging", 25(4), 9 (2018). https://doi.org/10.6117/KMEPS.2018.25.4.009
- A. Kroupa, D. Andersson, N. Hoo, J. Pearce, A. Watson, A. Dinsdale, and S. Muchlejohn, "Current Problems and Possible Solutions in High-Temperature Lead-Free Soldering", J. Mater. Eng. Perform., 21(5), 629 (2012). https://doi.org/10.1007/s11665-012-0125-3
- G. Zeng, S. McDonald, and K. Nogita, "Development of hightemperature solders: Review", Microelectron. Reliab., 52(7), 1306 (2012). https://doi.org/10.1016/j.microrel.2012.02.018
- L. S. Pei, B. Pan, H. Zhang, W. Ng, B. Wu, K. S. Siow, S. Sabne, and M. Tsuriya, "High-Temperature Pb-Free Die Attach Material Project Phase 1: Survey Result", Proc. International Conference on Electronics Packaging (ICEP), Yamagata, 16932449, IEEE (2017).
- V. R. Manikam and K. Y. Cheong, "Die Attach Materials for High Temperature Applications: A Review, Components, Packaging and Manufacturing Technology", IEEE Trans. Compon. Packag. Manuf. Technol., 1(4), 457 (2011). https://doi.org/10.1109/TCPMT.2010.2100432
- V. Chidambaram, J. Hald, and J. Hattel, "Development of Au-Ge based candidate alloys as an alternative to high-lead content solders", J. Alloys Compd., 490(1-2), 170 (2010). https://doi.org/10.1016/j.jallcom.2009.10.108
- J. N. Lalena, N. F. Dean, and M. W. Weiser, "Experimental investigation of Ge-doped Bi-11Ag as a new Pb-free solder alloy for power die attachment", J. Electron. Mater., 31, 1244 (2002). https://doi.org/10.1007/s11664-002-0016-8
- J.-M. Song, H.-Y. Chuang, and Z.-M. Wu, "Interfacial reactions between Bi-Ag high-temperature solders and metallic substrates", J. Electron. Mater., 35, 1041 (2006). https://doi.org/10.1007/BF02692565
- M. Rettenmayr, P. Lambracht, B. Kempf, and C. Tschudin, "Zn-Al based alloys as Pb-free solders for die attach" J. Electron. Mater., 31, 278 (2002). https://doi.org/10.1007/s11664-002-0144-1
- T. Shimizu, H. Ishikawa, I. Ohnuma, and K. Ishida, "Zn-Al-Mg-Ga alloys as Pb-free solder for die-attaching use", J. Electron. Mater., 28, 1172 (1999). https://doi.org/10.1007/s11664-999-0153-4
- S. Kim, K.-S. Kim, S.-S. Kim, and K. Suganuma, "Interfacial Reaction and Die Attach Properties of Zn-Sn High-Temperature Solders", J. Electron. Mater., 38, 266 (2009). https://doi.org/10.1007/s11664-008-0550-0
- J.-E. Lee, K.-S. Kim, K. Suganuma, J. Takenaka, and K. Hagio, "Interfacial Properties of Zn-Sn Alloys as High Temperature Lead-Free Solder on Cu Substrate", Mater. Trans., 46(11), 2413 (2005). https://doi.org/10.2320/matertrans.46.2413
- T. Wang, X. Chen, G.-Q. Lu, and G.-Y. Lei, "Low-Temperature Sintering with Nano-Silver Paste in Die-Attached Interconnection", J. Electron. Mater., 36(10), 1333 (2007). https://doi.org/10.1007/s11664-007-0230-5
- H. Yu, L. Li, and Y. Zhang, "Silver nanoparticle-based thermal interface materials with ultra-low thermal resistance for power electronics applications", Scr. Mater., 66(11), 931 (2012). https://doi.org/10.1016/j.scriptamat.2012.02.037
- S. Krishnan, A. S. M. A. Haseeb, and M. R. Johan, "Preparation and Low-Temperature Sintering of Cu Nanoparticles for High-Power Devices", IEEE Trans. Compon. Packag. Manuf. Technol., 2(4), 587 (2012). https://doi.org/10.1109/TCPMT.2012.2189208
- S. W. Yoon, M. D. Glover, H. A. Mantooth, and K. Shiozaki, "Reliable and repeatable bonding technology for high temperature automotive power modules for electrified vehicles", J. Micromech. Microeng., 23(1), 015017 (2013). https://doi.org/10.1088/0960-1317/23/1/015017
- T. A. Tollefsen, A. Larsson, O. M. Lovvik, and K. E. Aasmundtveit, "High Temperature Interconnect and Die Attach Technology: Au-Sn SLID Bonding", IEEE Trans. Compon. Packag. Manuf. Technol., 3(6), 904 (2013). https://doi.org/10.1109/TCPMT.2013.2253353
- L. Bernstein, "Semiconductor Joining by the Solid-Liquid- Interdiffusion (SLID) Process: I. The Systems Ag-In, Au-In, and Cu-In", J. Electrochem. Soc., 113(12), 1282 (1966). https://doi.org/10.1149/1.2423806
- N. P. Kim and R. F. Cooley, "Wafer back metallization for semiconductor packaging", Thin Solid Films, 153(1-3), 447 (1987). https://doi.org/10.1016/0040-6090(87)90204-5
- G. Ghosh, "Dissolution and interfacial reactions of thin-film Ti/Ni/Ag metallizations in solder joints", Acta Mater., 49(14), 2609 (2001). https://doi.org/10.1016/S1359-6454(01)00187-2
- N. Saunders and A. P. Miodownik, "The Cu-Sn (Copper-Tin) system", Bulletin of Alloy Phase Diagrams, 11, 278 (1990). https://doi.org/10.1007/BF03029299
- I. Karakaya and W. T. Thompson, "The Ag-Sn (Silver-Tin) system", Bulletin of Alloy Phase Diagrams, 8, 340 (1987). https://doi.org/10.1007/BF02869270
-
A. Lis, M. S. Park, R. Arroyave, and C. Leinenbach, "Early stage growth characteristics of
$Ag_3Sn$ intermetallic compounds during solid-solid and solid-liquid reactions in the Ag-Sn interlayer system: Experiments and simulations", J. Alloys Compd., 617, 763 (2014). https://doi.org/10.1016/j.jallcom.2014.08.082 -
M. S. Park and R. Arroyave, "Concurrent nucleation, formation and growth of two intermetallic compounds (
$Cu_6Sn_5$ and$Cu_3Sn$ ) during the early stages of lead-free soldering", Acta Mater., 60(3), 923 (2012). https://doi.org/10.1016/j.actamat.2011.10.053 - J. Choi, G. S. Choi, and S. J. An, "Reliable low-temperature die attach process using Ag/Sn/Ag sandwich structure for high-temperature semiconductor devices", Sci. Rep., 9(1), 1 (2019). https://doi.org/10.1038/s41598-018-37186-2
- S. Annuar, R. Mahmoodian, M. Hamdi, and K. -N. Tu, "Intermetallic compounds in 3D integrated circuits technology: brief review", Sci. Technol. Adv. Mater., 18(1), 693 (2017). https://doi.org/10.1080/14686996.2017.1364975
-
L. Yin and P. Borgesen, "On the root cause of Kirkendall voiding in
$Cu_3Sn$ ", J. Mater. Res., 26(3), 455 (2011). https://doi.org/10.1557/jmr.2010.47 - J. Y. Kim and J. Yu, "Effects of residual impurities in electroplated Cu on the Kirkendall void formation during soldering", Appl. Phys. Lett., 92, 092109 (2008). https://doi.org/10.1063/1.2890072
- J. Yu and J. Y. Kim, "Effect of residual S on Kirkendall void formation at Cu/Sn-3.5Ag solder joints", Acta Materl., 56(19), 5514 (2008) https://doi.org/10.1016/j.actamat.2008.07.022
- S. W. Yoon, M. D. Glover, and K. Shiozaki, "Nickel-Tin transient liquid phase bonding toward high-temperature operational power electronics in electrified vehicles", IEEE Trans. Power Electron., 28(5), 2448 (2013). https://doi.org/10.1109/TPEL.2012.2212211