Journal of Adhesion and Interface (접착 및 계면)

The Society of Adhesion and Interface, Korea (한국접착및계면학회)
권호 표지
DOI QR코드

DOI QR Code

Shear Strength of an Aluminum Alloy Bonded with a DP-460 Adhesive: Single Lap-shear Joints

  • Kim, Hyun-Bum (Mechanical Engineering, National Institute of Technology, Numazu College) ;
  • Nishida, Tomohisa (Mechanical Engineering, National Institute of Technology, Numazu College) ;
  • Oguma, Hiroyuki (National Institute for Materials Science, Bonding and Manufacturing Field, Polymer Matrix Hybrid Composite Materials Group, Research Center for Structural Materials) ;
  • Naito, Kimiyoshi (National Institute for Materials Science, Bonding and Manufacturing Field, Polymer Matrix Hybrid Composite Materials Group, Research Center for Structural Materials)
  • Received : 2019.12.26
  • Accepted : 2020.02.13
  • Published : 2020.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Single lap-shear joints (SLJ) specimens with and without partial round fillets were fabricated to measure the average shear strength of adhesives. The effects of the length of the adherend on the SLJ specimens were also investigated. An epoxy adhesive was used to bond aluminum alloy. Tensile tests were performed on the adhesive bulk specimens to measure the mechanical properties. The finite element analysis (FEA) method was used to measure the adhesive stress distributions, i.e., the peel and shear stresses, on the bonded part. The experimental results revealed that the specimen consisting short length of adherend and without the partial round fillets exhibited the smallest average shear strength of adhesive among the investigated specimens. FEA revealed that the low average shear strength for the specimen with a short adherend length was caused by high stress concentrations on the adhesive at the edge of the bonded part.

Keywords

References

  1. D.A. Bigwood and A.D. Crocombe, International Journal of Adhesion and Adhesives, 9, 229-242 (1989). https://doi.org/10.1016/0143-7496(89)90066-3
  2. J.A. Harris and R.D. Adams, International Journal of Adhesion and Adhesives, 4, 65-78 (1984). https://doi.org/10.1016/0143-7496(84)90103-9
  3. M. Papini, G. Fernlund, and J.K. Spelt, International Journal of Adhesion and Adhesives, 14, 5-13 (1994). https://doi.org/10.1016/0143-7496(94)90015-9
  4. F.L. Matthews, P.F. Kilty, and E.W. Godwin, Composite, 29-37 (1982).
  5. Paul A Cooper and James Wayne Sawyer, NASA Technical Paper, 1-59 (1979).
  6. Chihdar Yang and Su-Seng Pang, Composite Engineering, 3, 1051-1063 (1993). https://doi.org/10.1016/0961-9526(93)90020-k
  7. R.D.S.G. Campilho, M.F.S.F. de Moura, and J.J.M.S. Domingues, Composite Science and Technology, 65, 1948-1958 (2005). https://doi.org/10.1016/j.compscitech.2005.04.007
  8. M. Quaresimin and M. Ricotta, Composite Science and Technology, 66, 647-656 (2006). https://doi.org/10.1016/j.compscitech.2005.07.036
  9. R.D.S.G. Campilho, M.D. Banea, J.A.B.P. Neto, and L.F.M. da Silva, International Journal of Adhesion and Adhesives, 44, 48-56 (2013). https://doi.org/10.1016/j.ijadhadh.2013.02.006
  10. M. Quaresimin and M. Ricotta, Composite Science and Technology, 66, 176-187 (2006). https://doi.org/10.1016/j.compscitech.2005.04.026
  11. R.D.S.G. Campilho, M.D. Banea, J.A.B.P. Neto, and L.F.M. da Silva, International Journal of Adhesion & Adhesives, 44, 48-56 (2013). https://doi.org/10.1016/j.ijadhadh.2013.02.006
  12. Lucas F.M. da Silva, T.N.S.S. Rodrigues, M.A.V. Figueiredo, M.F.S.F. de Moura, and J.A.G. Chousal, The Journal of Adhesion, 82, 1091-1115 (2006). https://doi.org/10.1080/00218460600948511
  13. Ramazan Kahraman, Mehmet Sunar, and Bekir Yilbas, Journal of Material Processing Technology, 205, 183-189 (2008). https://doi.org/10.1016/j.jmatprotec.2007.11.121
  14. Murat Demir Aydin, Adnan Ozel, and Semsettin Temiz, Journal of Adhesion Science and Technology, 19, 705-718 (2005). https://doi.org/10.1163/1568561054890499
  15. M.Y. Tsai and J. Morton, Mechanics of Materials, 20, 183-194 (1995). https://doi.org/10.1016/0167-6636(94)00056-5
  16. Technical data sheet, 3MTM Scotch-WeldTM Epoxy adhesives DP460 Off-White and DO460NS (2019).
  17. H.-B. KIM, K. NAITO, and H. OGUMA, Fatigue & Fracture of Engineering Materials & Structures, 40, 1795-1808 (2017). https://doi.org/10.1111/ffe.12599
  18. "Rubber, vulcanized or thermoplastics-determination of tensile stress-strain properties," JIS K 6251 (2010).
  19. "Adhesives for general works," JIS S 6040 (1995).
  20. ANSYS, Release 15.0, ANSYS, Inc. (2013).
  21. Dick J. Chang and R. Muki, International Journal of Solids and Structures, 10, 503-517 (1974). https://doi.org/10.1016/0020-7683(74)90055-9
  22. W. James Penton and Jack R. Vinson, The Journal of Adhesion, 7, 175-193 (1975). https://doi.org/10.1080/00218467508075049
  23. Gang Li, Pearl Lee-Sullivan, International Journal of Adhesion & Adhesives, 21, 211-220 (2001). https://doi.org/10.1016/S0143-7496(00)00052-X
  24. J.N. Boss, V.K. Ganesh, and C.T. Lim, Composite Structures, 62, 113-121 (2003). https://doi.org/10.1016/S0263-8223(03)00097-7
  25. Chihdar Yang, Hai Huang, John S. Tomblin, and Wenjun Sun, Journal of Composites Materials, 38, 293-309 (2004). https://doi.org/10.1177/0021998304039268