Journal of Power Electronics

  • 제19권6호
  • /
  • Pages.1440-1448
  • /
  • 2019
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지
DOI QR코드

DOI QR Code

Graphical Design Plane Analysis for Series-Compensated Resonant Energy Links of Inductive Wireless Power Transfer Systems

  • Jeong, Chae-Ho (School of Electrical Engineering, University of Ulsan) ;
  • Choi, Sung-Jin (School of Electrical Engineering, University of Ulsan)
  • 투고 : 2019.02.07
  • 심사 : 2019.08.15
  • 발행 : 2019.11.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In wireless power transfer systems, it is important to design resonant energy links in order to increase the power transfer efficiency and to obtain desired system performances. This paper proposes a method for designing and analyzing the resonant energy links in a series-series configured IPT (inductive power transfer) system using the FOM-rd plane. The proposed FOM-rd graphical design plane can analyze and design the voltage gain and the power efficiency of the energy links while considering changes in the misalignment between the coils and the termination load condition. In addition, the region of the bifurcation phenomena, where voltage gain peaks are split over the frequency, can also be distinctly identified on the graphical plane. An example of the design and analysis of a 100 W inductive power transfer system with the proposed method is illustrated. The proposed method is verified by measuring the voltage gain and power efficiency of implemented hardware.

키워드

참고문헌

  1. Chwei-Sen Wang, G. A. Covic and O. H. Stielau, “Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems,” IEEE Trans. Ind. Electron., Vol. 51, No. 1, pp. 148-157, Feb. 2004. https://doi.org/10.1109/TIE.2003.822038
  2. J. Sallan, J. L. Villa, A. Llombart, and J. F. Sanz, “Optimal design of ICPT systems applied to electric vehicle battery charge,” IEEE Trans. Ind. Electron., Vol. 56, No. 6, pp. 2140-2149, Jun. 2009. https://doi.org/10.1109/TIE.2009.2015359
  3. S. Chopra and P. Bauer, "Analysis and design considerations for a contactless power transfer system," in Proc. IEEE 33rd INTELEC, pp. 1-6, 2011.
  4. S. Raju, R. Wu, M. Chan, and C. P. Yue, "Modeling of mutual coupling between planar inductors in wireless power applications," IEEE Trans. Power Electron., Vol. 29, No. 1, pp. 481-490, Jan. 2014. https://doi.org/10.1109/TPEL.2013.2253334
  5. X. Tang, J. Zeng, K. P. Pun, S. Mai, C. Zhang, and Z. Wang, “Low-cost maximum efficiency tracking method for wireless power transfer systems,” IEEE Trans. Power Electron., Vol. 33, No. 6, pp. 5317-5329, Jun. 2018. https://doi.org/10.1109/TPEL.2017.2726085
  6. D. H. Tran, V. B. Vu, and W. Choi, “Design of a high-efficiency wireless power transfer system with intermediate coils for the on-board chargers of electric vehicles,” IEEE Trans. Power Electron., Vol. 33, No. 1, pp. 175-187, Jan. 2018. https://doi.org/10.1109/TPEL.2017.2662067
  7. Z. Huang, S. C. Wong, and C. K. Tse, “Control design for optimizing efficiency in inductive power transfer systems,” IEEE Trans. Power Electron., Vol. 33, No. 5, pp. 4523-4534, May 2018. https://doi.org/10.1109/TPEL.2017.2724039
  8. F. Liu, Y. Yang, D. Jiang, X. Ruan, and X. Chen, “Modeling and optimization of magnetically coupled resonant wireless power transfer system with varying spatial scales,” IEEE Trans. Power Electron., Vol. 32, No. 4, pp. 3240-3250, Apr. 2017. https://doi.org/10.1109/TPEL.2016.2581840
  9. T. Komaru, M. Koizumi, K. Komurasaki, T. Shibata, and K, Kano, "Parametric evaluation of mid-range wireless power transmission," 2010 IEEE International Conference on Industrial Technology, pp. 789-792, 2010.
  10. H. Sugiyama, "Optimal designs for wireless resonant energy link with symmetrical coil pair," 2011 IEEE MTT-S International Microwave Workshop Series on Innovative Wireless Power Transmission: Technologies, Systems, and Applications, pp. 247-250, 2011.
  11. A. O. Anele, Y. Hamam, L. Chassagne, J. Linares, Y. Alayli, and K. Djouani, "Computation of the mutual inductance between air-cored coils of wireless power transformer," J. Physics: Conference Series, Vol. 633, No. 1, 2015.
  12. J. P. K. Sampath, A. Alphones, and D. M. Vilathgamuwa, “Figure of merit for the optimization of wireless power transfer system against misalignment tolerance,” IEEE Trans. Power Electron., Vol. 32, No. 6, pp. 4359-4369, Jun. 2017. https://doi.org/10.1109/TPEL.2016.2601939
  13. W. Zhang, S. C. Wong, C. K. Tse, and Q. Chen, “Design for efficiency optimization and voltage controllability of series-series compensated inductive power transfer systems,” IEEE Trans. Power Electron., Vol. 29, No. 1, pp. 191-200, Jan. 2014. https://doi.org/10.1109/TPEL.2013.2249112
  14. C. H. Jeong, H. S. Choi, and S. J. Choi, "FOM-rd plane: An effective design and analysis methodology for resonant energy link in inductive power transfer," 2017 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 4030-4034, 2017.
  15. F. W. Grover, Inductance Calculations: Working Formulas and Tables, Van Nostrand, New York, 1946
  16. P. E. K. Donaldson, "Frequency-hopping in r.f. energy-transfer links," Electron. & Wireless World, pp. 24-26, Aug. 1986.