참고문헌
- Sim, G. J., Cheong, C. Y., Oh, S. H. and Seo, N. S., "A Study on the Classification and Prediction of the Chip Type under the Specified Cutting Condition in Turning, KSPE, Vol. 12, No.8, pp. 53-62, 1995.
- Levy, E. K., "Analytical Investigation of the Effect of Tool Wear on the Temperature Variations in a Metal Cutting Tool, Trans. ASME, pp. 251-257, 1976.
- Park, E. S. "A Study on Surface Roughness of Al alloy 7075 to Cutting depth in High-speed Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 6, pp. 29-35, 2010.
- Yoo, C. H., Song, J. H. and Lee, Y. H., "A Study on CAD/CAM Pocket Processing using the High Speed Machine", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 3, No. 3, pp. 32-38, 2004.
- Choi, J. G., Kim, H. S. and Kim, S. C., "A Study on the Optimum Finish Allowance for Machining Accuracy Improvement in the End Milling Processes", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 13, No. 3, pp. 8-14, 2004.
- Lim, P. and Yang, G. E., "Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 5, No. 4, pp. 59-64, 2006.
- Naito, K., Ogo, K., Konaga, T., Abe, T., Kanda, K. and Matsuoka, K., "Development of Ball End Milling for Fine Finish, High-efficiency", JSPE, Vol. 59, No. 4, pp. 117-122, 1993.
- Schultz, H., "High-Speed Milling of Dies and Molds Cutting Conditions and Technology", Annals of the CIRP, Vol. 44, No. 1, pp. 35-38, 1995. https://doi.org/10.1016/S0007-8506(07)62270-7
- Kim, K. H., LEE, D. W., Kang, H. S., Kang, M. C. and Kim, J. S., "Study on the Tool Holding System for High Speed Machining of the Deep Pocket", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 1, No. 1, pp. 38-47, 2002.
- Shamoto, E. and Hatinas, Y., "Prediction of Shear Angle in Cutting with Maximum Shear Stress and Technology", ASME, Vol. 1, PP. 121-128, 1997.
- Wang, J., Kuriyagawa, T., Wei, X. P. and Guo, D. M., "Optimization of Cutting Conditions for Single Pass Turning Operations using a Deterministic Approach", International Journal of Machine Tools and Manufacture, Vol. 42, pp. 1023-1033, 2002. https://doi.org/10.1016/S0890-6955(02)00037-8
- Bae, H. J., Lee, S. J., Seo, Y. B. and Park, H. S., "Topography Analysis in High Speed Working by Flat Endmill", Journal of the Korean Society of Manufacturing Process Engineers, , Vol. 1, No. 1, pp. 79-88, 2002.
- Seo, S. W., Kim, D. H. and Kim, S. J., "A Study on the Linear Compensation Method of Ideal Surface Roughness to Actual Roughness in Milling", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 15, No. 3, pp. 15-20, 2017.
- Lee, S. J., Choi, S. C., Kim, J. G., Shin, I. D., Lee, D. W. and Lee, J. R., "Machining Characteristics of Nickel-Chrome according to Changing with Ultra High-Speed RPM", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 1-5, 2010.
- Kang, M. C. and Kim, J. S., "Study on the Tool Holding System for High Speed Machining of the Deep Pocket", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 1, No. 1, pp. 38-47, 2002.
- Choi, S. C., Kim, W., Y., Lee, S. J. and Lee, D. W., "Development of High Speed Precision Air Spindle for Machining High Brittle Material", KSMPE Spring Conference 2009, pp. 213-215, 2009.