Browse > Article
http://dx.doi.org/10.14775/ksmpe.2019.18.11.089

Research on High-Efficiency Machining through Bottom-up Machining using CAD/CAM System  

Jeong, Dae Hoon (Korea Delcam Co.,Ltd)
Han, Kyu-Taek (Department of Mechanical Engineering, PKNU)
Publication Information
Journal of the Korean Society of Manufacturing Process Engineers / v.18, no.11, 2019 , pp. 89-95 More about this Journal
Abstract
In this research, the effect of roughing on tool load through bottom-up machining is investigated through actual machining. Generally, through the use of high-speed machining technology, machining methods, such as general roughing, operate by deepening the cutting depth for as long as the tool is able to withstand it, giving a slower feed rate, less cutting depth, and faster feed. However, when the cutting depth is deep, there is a problem in that the stepped shape of the cutting area is increased (e.g., by the shaking of the tool or the chipping load). However, if the cutting is performed less, the cutting time becomes relatively long. To compensate for these drawbacks and extend the service life of the tool, economic efficiency needs to be secured.
Keywords
Bottom-up Machining; High Efficiency; High Speed; Cutting Depth;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Sim, G. J., Cheong, C. Y., Oh, S. H. and Seo, N. S., "A Study on the Classification and Prediction of the Chip Type under the Specified Cutting Condition in Turning, KSPE, Vol. 12, No.8, pp. 53-62, 1995.
2 Levy, E. K., "Analytical Investigation of the Effect of Tool Wear on the Temperature Variations in a Metal Cutting Tool, Trans. ASME, pp. 251-257, 1976.
3 Park, E. S. "A Study on Surface Roughness of Al alloy 7075 to Cutting depth in High-speed Machining", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 6, pp. 29-35, 2010.
4 Yoo, C. H., Song, J. H. and Lee, Y. H., "A Study on CAD/CAM Pocket Processing using the High Speed Machine", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 3, No. 3, pp. 32-38, 2004.
5 Choi, J. G., Kim, H. S. and Kim, S. C., "A Study on the Optimum Finish Allowance for Machining Accuracy Improvement in the End Milling Processes", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 13, No. 3, pp. 8-14, 2004.
6 Lim, P. and Yang, G. E., "Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 5, No. 4, pp. 59-64, 2006.
7 Naito, K., Ogo, K., Konaga, T., Abe, T., Kanda, K. and Matsuoka, K., "Development of Ball End Milling for Fine Finish, High-efficiency", JSPE, Vol. 59, No. 4, pp. 117-122, 1993.
8 Schultz, H., "High-Speed Milling of Dies and Molds Cutting Conditions and Technology", Annals of the CIRP, Vol. 44, No. 1, pp. 35-38, 1995.   DOI
9 Kim, K. H., LEE, D. W., Kang, H. S., Kang, M. C. and Kim, J. S., "Study on the Tool Holding System for High Speed Machining of the Deep Pocket", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 1, No. 1, pp. 38-47, 2002.
10 Shamoto, E. and Hatinas, Y., "Prediction of Shear Angle in Cutting with Maximum Shear Stress and Technology", ASME, Vol. 1, PP. 121-128, 1997.
11 Wang, J., Kuriyagawa, T., Wei, X. P. and Guo, D. M., "Optimization of Cutting Conditions for Single Pass Turning Operations using a Deterministic Approach", International Journal of Machine Tools and Manufacture, Vol. 42, pp. 1023-1033, 2002.   DOI
12 Bae, H. J., Lee, S. J., Seo, Y. B. and Park, H. S., "Topography Analysis in High Speed Working by Flat Endmill", Journal of the Korean Society of Manufacturing Process Engineers, , Vol. 1, No. 1, pp. 79-88, 2002.
13 Choi, S. C., Kim, W., Y., Lee, S. J. and Lee, D. W., "Development of High Speed Precision Air Spindle for Machining High Brittle Material", KSMPE Spring Conference 2009, pp. 213-215, 2009.
14 Seo, S. W., Kim, D. H. and Kim, S. J., "A Study on the Linear Compensation Method of Ideal Surface Roughness to Actual Roughness in Milling", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 15, No. 3, pp. 15-20, 2017.
15 Lee, S. J., Choi, S. C., Kim, J. G., Shin, I. D., Lee, D. W. and Lee, J. R., "Machining Characteristics of Nickel-Chrome according to Changing with Ultra High-Speed RPM", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 2, pp. 1-5, 2010.
16 Kang, M. C. and Kim, J. S., "Study on the Tool Holding System for High Speed Machining of the Deep Pocket", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 1, No. 1, pp. 38-47, 2002.