Journal of the Korean Recycled Construction Resources Institute (한국건설순환자원학회논문집)

Korean Recycled Construction Resources Institute (한국건설순환자원학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Strength and Durability of Mortar using Ferronickel Slag Powder and Admixtures

페로니켈슬래그 미분말 및 혼화재의 복합사용에 따른 모르타르의 강도 및 내구성 평가

  • Jo, Seol-Ah (DongSung Engineering Co., Ltd.) ;
  • Yoo, Jeong-Hwan (Department of Civil Environmenal Engineering, Sangmyung University) ;
  • Park, Sang-Soon (Department of Civil Environmenal Engineering, Sangmyung University)
  • 조설아 ((주)동성엔지니어링 기술연구소) ;
  • 유정환 (상명대학교 건설시스템공학과) ;
  • 박상순 (상명대학교 건설시스템공학과)
  • Received : 2019.08.26
  • Accepted : 2019.09.24
  • Published : 2019.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Ferronickel slag, which is an industrial byproduct, is activated by mechanochemical reaction as a nonferrous metal and can be used as an admixture. Therefore, ferronickel slag is used as a substitute resource of admixture. In this study, to evaluate the effect of mixed of ferronickel slag powder and admixture, a mortar using a mixture of ferronickel slag powder, quicklime, gypsum and calcium chloride was fabricated by vibrated and rolled manufacturing method. Strength were evaluated by flexural and compressive strength tests, and durability was evaluated by performing chlorine ion penetration resistance and chemical resistance test. When the substitution ratio of ferronickel slag powder is constant, it is considered that the mixed use of quicklime, gypsum and calcium chloride as admixtures increases the performance.

본 논문에서는 페로니켈슬래그 미분말 및 혼화재의 복합사용에 따른 모르타르의 강도 및 내구성 평가를 실시하였다. 페로니켈슬래그 및 생석회, 석고, 염화칼슘을 OPC 대비 20%로 치환하여 복합사용 하였으며, 휨강도 및 압축강도, SEM분석을 통한 모르타르의 강도 평가를 실시하였다. 석고를 혼화재로 사용하였을 때 초기강도 발현은 보이지만, 페로니켈슬래그 및 생석회, 염화칼슘을 혼화재로 복합사용 하였을 때 강도발현과 강도증진효과가 극대화 되었으며, 혼화재의 적절한 복합사용이 미세한 공극 채움과 밀도개선효과로 인해 강도와 내구성 개선에 영향을 주는 것으로 판단된다. 또한 화학적침식저항성 및 XRD 분석을 통해 혼화재의 적절한 복합사용은 수화 생성물인 Muscovite의 함량에 따라 강도가 증가하는 경향을 보였고, 규산염은 산 알칼리에는 용해되지 않으므로 화학적 침식 저항 성능이 OPC에 비하여 우수한 것으로 사료된다.

Keywords

References

  1. ASTM C 1202. (2010). Standard Test Method for Electrical Indication of Concrete's Abilityto Resist Chloride Ion Penetration, ASTM International, 4, 1-6.
  2. KS F 4042. (2007). Polymer Modified Cement Mortar for Maintenance in Concrete Structure, Korean Industrial Standards, 1-15.
  3. KS F 4402. (2016). Vibrated and Rolled Reinforced Concrete Pipe, Korean Industrial Standards, 1-13.
  4. KS F 4403. (2016). Reinforced Spun Concrete Pipes, Korean Industrial Standards, 1-39.
  5. KS L 5109. (2017). Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, Korean Industrial Standards, 1-8.
  6. Kwon, S.J., Yoon, Y.S., Park, S.M., Kim, H.J. (2016). Evaluation of durability performance of fly ash blended concrete due to fly ash replacement with tire derived fuel ash, Journal of the Korea Concrete Institute, 28(6), 647-653. https://doi.org/10.4334/JKCI.2016.28.6.647
  7. Ministry of Agriculture, Food and Rural Affairs. (2011).
  8. Park, S.H., Chu, Y.S., Song, H. Lee, J.K. (2013). Fabrication of $Mg(OH)_2$ from ferro-nickel slag, Journal of the Korean Institute of Resources Recycling, 22(1), 42-47. https://doi.org/10.7844/kirr.2013.22.1.42
  9. Park, S.S., Jeong, J.W. (2014). A study of accelerated corrosion test and chloride penetration analysis with artificial seawater immersion condition, Journal of the Korea Institute for Structural Maintenance and Inspection, 18(1), 93-100. https://doi.org/10.11112/jksmi.2014.18.1.093
  10. Park, S.S. (2017). Strength and resistance to chloride penetration in mortar containing ferronickel slag powder by vibrated and rolled manufacturing method, Journal of the Korea Institute for Structural Maintenance and Inspection, 29(6), 633-640.
  11. Park, S.S. (2017). Corrosion-resisting performance evaluation of concrete mixed with fly-ash, Journal of the Korea Institute for Structural Maintenance and Inspection, 21(1), 117-125. https://doi.org/10.11112/jksmi.2017.21.1.117
  12. Ra, J.M., Choi, D.J., Kang, C., Kim, J.Y., Kang, S.P., Kim, J.M. (2009). Strength properties of cement mortar mixed with various types of gypsum, Academic Conference Journal of the Korea Institute for Structural Maintenance and Inspection, 11, 295-296.
  13. Ra, J.M., Kim, G.T., Yoo, S.W., Choi, Y.C. (2018). Evaluation of water-tightness performance of repair materials by using resistance of chloride ion penetration in concrete sewage pipe, Academic Conference Journal of the Korea Concrete Institute, 30(2), 555-556.
  14. Sereenen, O. (2013). A Study on the Utilization of Mechanically Activated Ferro-nickel Slag, Suncheon National University.
  15. Song, H.W., Kwon, S.J., Byun, K.J. (2003). A study on resistance of chloride ion penetration in ground granulated blast-furnace slag concrete, Journal of the Korea Concrete Institute, 15(3), 400-408. https://doi.org/10.4334/JKCI.2003.15.3.400