Journal of Korean Tunnelling and Underground Space Association (한국터널지하공간학회 논문집)

Korean Tunnelling and Underground Space Association (한국터널지하공간학회)
권호 표지
DOI QR코드

DOI QR Code

A review on the design requirement of temperature in high-level nuclear waste disposal system: based on bentonite buffer

고준위폐기물처분시스템 설계 제한온도 설정에 관한 기술현황 분석: 벤토나이트 완충재를 중심으로

  • 김진섭 (한국원자력연구원 방사성폐기물처분연구부) ;
  • 조원진 (한국원자력연구원 방사성폐기물처분연구부) ;
  • 박승훈 (인하대학교 에너지자원공학과) ;
  • 김건영 (한국원자력연구원 방사성폐기물처분연구부) ;
  • 백민훈 (한국원자력연구원 방사성폐기물처분연구부)
  • Received : 2019.05.28
  • Accepted : 2019.08.02
  • Published : 2019.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Short-and long-term stabilities of bentonite, favored material as buffer in geological repositories for high-level waste were reviewed in this paper in addition to alternative design concepts of buffer to mitigate the thermal load from decay heat of SF (Spent Fuel) and further increase the disposal efficiency. It is generally reported that the irreversible changes in structure, hydraulic behavior, and swelling capacity are produced due to temperature increase and vapor flow between $150{\sim}250^{\circ}C$. Provided that the maximum temperature of bentonite is less than $150^{\circ}C$, however, the effects of temperature on the material, structural, and mineralogical stability seems to be minor. The maximum temperature in disposal system will constrain and determine the amount of waste to be disposed per unit area and be regarded as an important design parameter influencing the availability of disposal site. Thus, it is necessary to identify the effects of high temperature on the performance of buffer and allow for the thermal constraint greater than $100^{\circ}C$. In addition, the development of high-performance EBS (Engineered Barrier System) such as composite bentonite buffer mixed with graphite or silica and multi-layered buffer (i.e., highly thermal-conductive layer or insulating layer) should be taken into account to enhance the disposal efficiency in parallel with the development of multilayer repository. This will contribute to increase of reliability and securing the acceptance of the people with regard to a high-level waste disposal.

본 연구에서는 고준위폐기물 처분장 내 완충재 로 제시되고 있는 벤토나이트의 재료적인 측면에서 장 단기 처분 안정성을 분석하였으며, 처분효휼 향상을 위한 완충재 디자인 관련 대안개념에 대해 연구동향을 분석하였다. 일반적으로 $150{\sim}250^{\circ}C$ 사이에서 온도증가 및 증기발생 등으로 인해 완충재의 수리전도도와 팽윤능에 비가역적인 변화가 발생한다고 보고된다. 하지만 완충재의 최고온도가 최소한 $150^{\circ}C$를 초과하지 않는다면 온도가 벤토나이트 완충재의 재료적, 구조적 그리고 광물학적 안전성에 미치는 영향은 크지 않는 것으로 분석되었다. 완충재 최고온도 제한은 심층처분장 단위면적에 처분할 수 있는 폐기물의 양을 제한하여 처분효율을 결정하며, 나아가 처분부지의 확보 가능성에까지 영향을 미치는 중요한 설계 인자이다. 따라서 고온이 완충재의 성능에 미치는 영향을 규명함으로써 완충재의 최고온도 제한을 완화하고, 이를 통해 심층처분장의 처분밀도 향상과 처분장 설계의 최적화를 도모할 필요가 있다. 이와 더불어 처분효율을 극대화하기 위해서는 복합소재(흑연, 실리카 등) 및 다중구조(전도층, 절연층 등)의 고기능성 공학적방벽재 개발과 다층처분장(multilayer repository)으로 처분장 레이아웃을 변경하는 방법 등을 병행하여 검토할 필요가 있다. 이는 처분사업의 신뢰성 및 국민 수용성 확보에 큰 기여를 할 수 있을 것으로 판단된다.

Keywords

References

  1. Allen, C.C., Lane, D.L., Palmer, R.A., Jonston, R.G. (1984), "Experimental studies of packing material stability", In Scientific Basis for Nuclear Waste Management, pp. 105-112.
  2. Alonso, J., Cormenzana, J.L. (2005), NF-PRO deliverable (D-No.: 5.1.1), Part 1. Phenomenological description, Reference Concept (Spent Fuel - Carbon Steel Canister - Bentonite - Granite).
  3. Bollingerfehr, W., Filbert, W., Wehrmann, J. (2008), "A new approach for direct disposal of spent fuel into deep vertical boreholes in a salt repository-8232", Proceedings of the WM2008 Conference, February 24-28, 2008, Pheonix, Arizona, pp. 1-9.
  4. Borgesson, L., Karnland, O., Johannesson, L.E., Gunnarsson, D. (2006), Current status of SKB's research, development and demonstration programme on buffer, backfill and seals, SKB IC-122.
  5. Bradley, D.J., Coles, D.C., Hodge, P.N., McVay, G.L., Westerman, R.E. (1983), Nuclear waste package material testing report: basaltic and tuffaceous environments, ONWI-4452, Office of Nuclear Waste Isolation.
  6. Cho, W.J. (2019), Bentonite_barrier material for radioactive waste disposal, KAERI/GP-535/2019, KAERI, pp. 34.
  7. Cho, W.J., Lee, J.O., Choi, H.J. (2014), Thermal conductivity of domestic compacted bentonite and bentonite-sand mixture, KAERI/TR-5561/2014, KAERI.
  8. Choi, H.J., Choi, J. (2008), "Double-layered buffer to enhance the thermal performance in a high-level radioactive waste disposal system", Nuclear Engineering and Design, Vol. 238, No. 10, pp. 2815-2820. https://doi.org/10.1016/j.nucengdes.2008.04.017
  9. Choi, Y.C., Cho, W.J., Lee, J.O., Kim, G.Y. (2019), "Experimental data analysis during initial In-DEBS operation", Journal of Nuclear Fuel Cycle and Waste Technology, Vol. 17, No. S, pp. 81-95. https://doi.org/10.7733/jnfcwt.2019.17.S.81
  10. Couture, R.A. (1985), "Steam rapidly reduces the swelling capacity of bentonite", Nature, Vol. 318, No. 6041, pp. 50-52. https://doi.org/10.1038/318050a0
  11. Cuadros, J., Linares, J. (1996), "Experimental kinetic study of the smectite-to-illite transformation", Geochimica et Cosmochimica Acta, Vol. 60, No. 3, pp. 439-453. https://doi.org/10.1016/0016-7037(95)00407-6
  12. Eberl, D., Hower, J. (1976), "Kinetics of illite formation", Geological Society of America Bulletin, Vol. 87, No. 9, pp. 1326-1330. https://doi.org/10.1130/0016-7606(1976)87<1326:KOIF>2.0.CO;2
  13. Graf, R., Filbert, W. (2006), "Disposal of spent fuel from German nuclear power plants-Paper Work or Technology", Presentation at the Topseal Conference, 17-20, September, Olkiluoto, Finland, pp. 28-34.
  14. Grauer, R. (1986), Bentonite as a backfill material in the high-level waste repository: chemical aspects, Nagra Technical Report 86-12E.
  15. Grim, R.E. (1968), Clay Mineralogy, McGraw-Hill Book Company, New York, pp. 313-329.
  16. Hicks, T.W., Crawford, M.B. (2002), Co-disposal of HLW and spent fuel with ILW and LLW viability study: Hydro-Thermo-Mechanical effects, Galson Sciences Report 9902-1.
  17. Hicks, T.W., White, M.J., Hooker, P.J. (2009), Role of bentontie in determination of thermal limits on geological disposal facility design, 0883-1 Ver.2, Galson Sciences LTD.
  18. Hokmark, H. (2005), Temperature buffer test - Comparison of modelling results/experimental findings: causes of differences, Advances in Understanding Engineered Clay Barriers, Balkema Publishers, Leiden.
  19. Huang, W.L., Longo, J.M., Pevear, D.R. (1993), "An experimentally derived kinetic model for smectite-toillite conversion and its use as a geothermometer", Clays and Clay Minerals, Vol. 41, No. 2, pp. 162-177. https://doi.org/10.1346/CCMN.1993.0410205
  20. Ikonen, K. (2005), Thermal analysis of repository for spent EPR-type fuel, Posiva Oy Report POSIVA 2005-06.
  21. JNC (2000), H12: Project to establish the scientific and technical basis for HLW disposal in Japan, Second Progress Report on Research and Development for the Geological Disposal of HLW in Japan, Supporting Report 2: Repository Design and Engineering Technology, JNC TN1410 2000-003.
  22. Johnson, L., Gaus, I., Wieczorek, K., Mayor, J.C., Sellin, P., Villar, M.V., Samper, J., Cuevas, J., Gens, A., Velasco, M., Turrero, M.J., Montenegro, L., Martin, P.L., Armand, G. (2014), Integration of the short-term evolution of the engineered barrier system (EBS) with the long-term safety perspective, NAB 14-079, NAGRA, Wettingen.
  23. Johnson, L.H., Tait, J.C., Shoesmith, D.W., Crossthwaite, J.L., Gray, M.N. (1994), The disposal of Canada's nuclear fuel waste: engineered barriers alternatives, Atomic Energy of Canada Limited Report, AECL-10718, COG-93-08.
  24. KAERI (2006), High-level radwaste disposal technology development - HLW disposal system development, KAERI/RR-2765.
  25. KAERI (2011), Geological disposal of pyroprocessed waste from PWR spent nuclear fuel in Korea, KAERI/TR-4525/2011.
  26. Karnland, O. (2005), Laboratory experiments concerning compacted bentonite contacted to high pH solutions, Clay Technology AB, Final Report, European Commission Report EUR 21921.
  27. Karnland, O., Olsson, S., Nilsson, U. (2006), Mineralogy and sealing properties of various bentonites and smectite-rich clay minerals, SKB Technical Report TR-06-30.
  28. Kawamura, H., McKinley, I.G., Neall, F.B. (2008), "Practical and safe implementation of disposal with prefabricated EBS modules", International Technical Conference on Practical Aspects of Deep Radioactive Waste Disposal Session 2, No. 8.
  29. Kim, J.S., Kwon, S.K., Sanchez, M., Cho, G.C. (2011), "Geological storage of high level nuclear waste", KSCE Journal of Civil Engineering, Vol. 15, No. 4, pp. 721-737. https://doi.org/10.1007/s12205-011-0012-8
  30. Kober, F., Vomboris, S. (2017), "GTS HotBENT Project", ISCO, Handeck, June 13, NAGRA.
  31. Lee, C., Yoon, S., Cho, W.J., Jo, Y., Lee, S., Jeon, S., Kim, G.Y. (2019), "Study on thermal, hydraulic and mechancial properties of KURT granite and Geongju bentonite", Journal of Nuclear Fuel Cycle and Waste Technology, Vol. 17, No. S, pp. 65-80. https://doi.org/10.7733/jnfcwt.2019.17.S.65
  32. Lee, J.O., Cho, W.J., Hahn, P.S. (2004), "Hydraulic-Thermal-Mechanical properties and radionuclide release-retarding capacity of Kyungju bentonite", Journal of Nuclear Fuel Cycle and Waste Technology, Vol. 2, No. 2, pp. 87-96.
  33. Leupin, O.X., Birgersson, M., Karnland, O., Korkeakoski, P., Sellin, P., Mader, U., Wersin, P. (2014), Montmorillonite stability under near-field conditions, NAGRA TR-14-12.
  34. Martin, P.L., Barcala, J.M. (2005), Effects of over-heating on the performance of the engineering clayed barriers of the mock-up test, Advances in Understanding Engineered Clay Barriers, Taylor & Francis Group, London.
  35. Masuda, S., Umeki, H., McKinley I., Kawamura, H. (2004), "Management with CARE", Nuclear Engineering International, Vol. 49, No. 604, pp. 26-29.
  36. McKinley, I.G., Neall, F.B., Smith, P.A., West, J.M., Kawamura, H. (2004), "Evolution of the cavern-extended storage (CES) concept for flexible management of HLW", Scientific Basis for Nuclear Management XXVII (MRS2003 Conference), pp. 931-936.
  37. McKinley, I.G., Apted, M. (2007), CARE: Optimiation of deep geological disposal options in Korea, Presentation in KAERI.
  38. Meunier, A., Velde, B. (2004), Iillite, Springer, pp. 286.
  39. MOTIE (2016), A basic national plan for HLW management, Ministry of Trade, Industry and Energy.
  40. Muller-Vonmoos, M., Kahr, G., Bucher, F., Madsen, F.T. (1990), "Investigation of Kinnekulle K-bentonite aimed at assessing the long term stability of bentonites under repository conditions", Engineering Geology, Vol. 28, No. 3-4, pp. 269-280. https://doi.org/10.1016/0013-7952(90)90012-P
  41. NUMO (2004), Development of repository concepts for volunteer siting environments, NUMO Technical Report No. NUMO-TR-04-03.
  42. ONDRAF/NIRAS (2001), Technical overview of the SAFIR 2 report, Safety Assessment and Feasibility Interim Report 2, ONDRAF/NIRAS report NIROND 2001-05 E.
  43. Pedersen, K., Motamedi, M., Karnland, O., Sanden, T. (2000), "Mixing and sulphate-reducing activity of bacteria in swelling, compacted bentonite clay under high-level radioactive waste repository conditions", Journal of Applied Microbiolology, Vol. 89, No. 6, pp. 1038-1047. https://doi.org/10.1046/j.1365-2672.2000.01212.x
  44. PNC (1992), Research and devleopment on geological disposal of high-level radioactive waste - First progress report (H3), Power Reactor and Nuclear Fuel Development Corporation (PNC) - PNC TN1410 93-059.
  45. POSIVA (2008), Quality assurance of the bentonite material, POSIVA Working Report 2008-33 Finland.
  46. Pusch, R. (1983), Stability of deep-sited smectite minerals in crystalline rock-chemical aspects, SKBF/KBS TR 83-16, Sweden.
  47. Pusch, R. (1999), Is montmorillonite-rich clay of MX-80 type the ideal buffer for isolation of HLW?, SKB Technical Report TR-99-33.
  48. Pusch, R. (2008), Geological storage of radioactive waste, Springer-Verlag, Berlin.
  49. Pusch, R., Bluemling, P., Johnson, L.H. (2003), "Performance of strongly compressed MX-80 pellets under repository-like conditions", Applied Clay Science, Vol. 23, No. 1-4, pp. 239-244. https://doi.org/10.1016/S0169-1317(03)00108-X
  50. Radhakrishna, H.S. (1984), Thermal properties of clay-based buffer materials for a nuclear fuel waste disposal vault, AECL-7805, Atomic Energy of Canada Limited.
  51. Rothfuchs, T. (1986), Investigation of thermally induced water release from polyhalitic rock salt under in situ conditions:Temperature test 5 at the Asse salt mine, European Commission Report EUR10392 DE, In German with English Abstract.
  52. Sena, C., Salas, J., Arcos, D. (2010), Aspects of geochemical evolution of the SKB near field in the frame of SR-Site, SKB Technical Report, TR-10-59, SKB, Sweden.
  53. SKB (2003), Thermal dimensioning of the deep repository, Technical Report TR-03-09, Sweden.
  54. SKB (2004). RD&D-programme 2004, Programme for research, development and demonstration of methods for the management and disposal of nuclear waste, TR-04-21, Swedish Nuclear Fuel and Waste Manangement Co., Stockholm.
  55. SKB (2006), Buffer and backfill process report for the safety assessment SR-Can, SKB Technical Report TR-06-18.
  56. SKB (2016), RD&D Programme 2016, Programme for research, development and demonstration of methods for the management and disposal of nuclear waste, TR-16-15, Swedish Nuclear Fuel and Waste Manangement Co., Stockholm.
  57. SNL (2007), Total system performance assessment data input package for requirements analysis for DOE SNF/HLW and Naval SNF waste package physical attributes basis for performance assessment, DOC. 20070921.0009, Sandia National Laboratories.
  58. Tohata, I., Kuntiwattanakul, P., Oishi, K., Takeuchi, N. (1998), "Effect of elevated temperature on mechanical behaviour of clays", Tsuchi To Kiso, Vol. 46, No. 10, pp. 27-30 (in Japanese).
  59. Tsang, C.F., Bernier, F., Davies, C. (2005), "Geohydromechanical processes in the excavation damaged zone in crystalline rock, rock salt, and indurated and plastic clays-in the context of radioactive waste disposal", International Journal of Rock Mechanics and Mining Sciences, Vol. 42, No. 1, pp. 109-125. https://doi.org/10.1016/j.ijrmms.2004.08.003
  60. Villar, M.V., Lloret, A. (2007), "Dismantling of the first section of the FEBEX in situ test: THM laboratory tests on the bentonite blocks retrieved", Physics and Chemistry of the Earth, Parts A/B/C, Vol. 32, No. 8-14, pp. 716-729. https://doi.org/10.1016/j.pce.2006.03.009
  61. Vomvoris, S., Birkholzer, J., Zheng, L., Gaus, I., Blechschmidt, I. (2015), "THMC behavior of clay-based barriers under high temperature - from laboratory to URL scale", Proceedings of the International High-Level Radioactive Waste Management Conference, Charleston, NC, USA, pp. 678-687.
  62. Wersin, P., Johnson, L.H., McKinley, I.G. (2007), "Performance of the bentonite barrier at temperatures beyond $100^{\circ}C$: A critical review", Physics and Chemistry of the Earth, Parts A/B/C, Vol. 32, No. 8-14, pp. 780-788. https://doi.org/10.1016/j.pce.2006.02.051
  63. Wickham, S.M. (2008), Evolution of the near-field of the ONDRAF/NIRAS repository concept for category C wastes, NIROND-TR Report 2007-07E.
  64. Yau, Y.C., Peacor, D.R., Essene, E.J., Lee, J.H., Kuo, L.C., Cosca, M.A. (1987), "Hydrothermal treatment of smectite, illite, and basalt to $460^{\circ}C$: Comparison of Natural with hydrothermally formed clay minerals", Clays and Clay Minerals, Vol. 35, No. 4, pp. 241-250. https://doi.org/10.1346/CCMN.1987.0350401