• Mineral and Industry
• /
• v.16 no.1
• /
• pp.1-16
• /
• 2003

수천 년 전부터 인간생활에 이용되어온 일라이트-운모는 다른 광물자원에 비하여 사용량은 많지 않지만, 요업, 도료, 종이, 건축용 재료, 화장품 소재 및 전자부품과 전기 재료 등 여러 산업 분야에 널리 사용되고 있다. 일라이트-운모는 광물학적으로 같은 계열의 광물군임에도 불구하고 산출상태, 입도 및 용도의 차이에 따라 다른 광물자원으로 취급되고 있다. 특히 국내에서 일라이트는 용어상의 혼란과 불명확한 법정 등록광종 때문에 효율적인 자원관리와 연구개발이 곤란한 실정이다. 그러므로 일라이트를 비롯한 점토광물 자원에 대한 광업법규상의 개선과 제도적 정비가 시급히 요구된다. 국내에서 개발되고 있는 일라이트-운모의 광석 유형은 그 광물상과 산출상태에 따라 페그마타이트상 백운모, 운모편암상 백운모, 납석상 일라이트 및 점토상 일라이트로 구분된다. 일라이트와 운모는 서로 다른 용도로 사용되고, 그 용도에 따라 그 품위 및 품질 개념이 다르다. 일라이트-운모 광석의 품위 및 품질 면에서 가장 기본적인평가방식은 (1) 육안 및 편광현미경 관찰, (2) X-선회질 분석 및 (3) 화학분석인 것으로 생각된다. 특히 리트벨트법을 응용한 X-선회질 정량분석법은 일라이트의 품위를 산정하는데 유력한 수단이 될 수 있을 것으로 여겨진다. 국내 일라이트-운모 자원의 자원잠재성과 부가가치를 향상시키기 위해서는 광석에 대한 정확한 품위 평가를 바탕으로 가장 적절한 이용 분야를 모색해야 할 것으로 판단된다.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.1
• /
• pp.41-54
• /
• 2023

Illite is a common mineral that forms readily from feldspar and mica via hydrothermal alteration and exhibits various characteristics depending on the degree of hydrothermal alteration. To ensure continued mining of high-quality illite ore, it is crucial to understand the illitization. Thus, this study collected ores from two illite ore deposit and their surrounding alteration zones in Yeongdong-gun, Chungcheongbuk-do, a significant source of illite in the Republic of Korea, to determine the constituent mineral contents and textural characteristics. Polarized light microscopy analyses revealed that the illite ore deposit were highly illitized with little remaining textural characteristics of the parent mica schist, and only some quartz was present. The ore zone contained illite, muscovite, quartz, and feldspar, with illitization primarily occurring around feldspar and quartz. X-ray diffraction analyses identified that the content of illite/muscovite was approximately 50-75 wt.%, with a maximum of 75 wt.%. Additionally, X-ray fluorescence analyses indicated a linear increase in K₂O content with increasing illite content, showing the highest correlation among the major components analyzed. It is suggested that the illite in the Yeongdong area results from feldspar and quartz alteration by hydrothermal fluids along the fault, with illitization of feldspar occurring before that of quartz. The results of this study are expected to contribute to the development of high-quality illite ore deposit in Yeongdong, Chungcheongbuk-do.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.47-51
• /
• 2011

In this study, illite, an environmental friendly, low cost, and high aspect ratio additive, was used to improve flame retardant property of epoxy and it was fluorinated to enhance dispersion of hydrophilic illite in hydrophobic epoxy by introducing hydrophobic functional groups. Fluorination of illite enhanced illite dispersion ill epoxy solution before curing and that in the complex after curing. These enhanced dispersions were attributed to the increased affinity of illite to hydrophobic epoxy solution induced by fluorination of illite and the increased intercalation of epoxy polymer or exfoliation of illite by epoxy curing. Hence, limited oxygen index(LOI) of fluorinated illite/epoxy complex increased by 24%, compared to that of epoxy, suggesting that the preparation of fluorinated illite/epoxy complex increased their flame retardant properties.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.325-329
• /
• 2003

일반적으로 스멕타이트는 온도, 시간, 공극수 내 K 함량 등이 증가하면서 일라이트화 작용을 통하여 일라이트-스멕타이트 혼합층광물(I-S)로 전이된다. 따라서, 벤토나이트(주로 스멕타이트질 광물로 구성된 화산쇄설물의 변질산물)는 지질환경에 따라 스멕타이트 또는 다양한 혼합층비를 갖는 I-S를 함유하게 된다. 이러한 벤토나이트 내 스멕타이트와 일라이트의 혼합층비는 팽창성(expandability)으로 정량화할 수 있다. (중략)

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.467-472
• /
• 2011

This study investigated illite/polypropylene (PP) composite filament formation via melt-spinning and evaluated their physical properties to prepare functional fibers using natural materials. When composite filaments were formed, the composite filaments exhibited smaller fiber diameters compared to that of neat PP filament because of the lubricant effect of illite induced by its layered structure. Moreover, fluorination effect increased interfacial affinity and dispersion in the polymer, resulting in smaller diameter of fluorinated illite/PP composite filament, which was 2/3 of the neat PP filament diameter. Addition of raw and fluorinated illite improved thermal stability of illite/PP composite filament. Raw illite/PP composite filament cannot be used for a practical application, because it broke during drawing process, whereas the fluorinated illite/PP composite filament can be used for a practical application, because it exhibited similar tensile strength of the neat PP filament and 50% increased modulus. Even with improved illite/PP interfacial affinity and illite dispersion in the polymer, illite/PP composite filament formed microcomposite, because non-expandable illite had strongly bound layers, resulting in only a little illite exfoliation and PP intercalation into illite.

• Journal of the Mineralogical Society of Korea
• /
• v.14 no.1
• /
• pp.12-20
• /
• 2001

충북 영동군 동창광산에서 산출되는 일라이트(illite)광선의 표면화학특성을 전위차 적정 실험과 FITEQL3.2 프로그램을 이용하여 연구하였다. 정량 Xtjs 회절 분석에 의한 일라이트 광석의 광물조석은 석영 46.6% 일라이트 41.6% 카올리나이트(kaolinite) 11.8%이며 $N_2$BET 방법에 의하여 구한 비표면적은 $6.52 m^2$g이다. 전위차 적정 실험결과를 그란(Gran)법을 적용하여 구한 일라이트광석의 영전하점($pH_{pznpc}$ )은 pH 3.9 총표면 자리 밀도는 21.24 sites/$nm^2$이다. 표면 복합체 모델중 일정 용량 모델을 적용해 일라이트 광석의 표변 특성에 알맞는 모델을 찾아보았다. 일라이트 광석의 표면을 사면체 자리와 팔면체 자리로 나누어 설정한 2sites$-3pK_{ a}$s 모델은 변수값이 수렴되지않았으므로 부적절하다고 판단된다. 일라이트 광석의 표면을 하나의 균질한 흡착표면으로 가정해서 설정한 1 site -1 $K_{a}$ 와 1 site -2 $pK_{a}$ s 모델 사이에는 뚜렷한 차이는 없지만, 1 site -1 $pK_{a}$ 모델의 WSOS/DF 값이 17, 1 site - 2 $pK_a{s}$ 모델은 26으로서 앞 모델이 보다 적절하다. 이 결과는 일라이트 광석 표면에서 수소의 해리와 첨가 반응 중 첨가 반응을 무시하여도 표면반응을 설명하는 데 큰 무리가 없음을 시사한다. 가장 적절하다고 판단되는 1 site -1 $pK_{a}$ 모델의 $pK_{a}$ 값은 4.17, specific capacitance는 $6F/m^2$ 표면 자리 농도는 $1.15\Times10^{-3}$ mol/L 이다.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.327-337
• /
• 2007

Mineral compositions were determined using quantitative X-ray diffraction analysis on the three kinds of Youngdong illite consisting of white, yellow and refined yellow samples. Mean particle size and their size distribution patterns were measured by laser particle size analyzer. The characteristics of phosphate adsorption on illite were studied through batch adsorption experiments. The white illite has less illite content, but is finer than that of yellow. The refined yellow illite has more illite content and finer particle size compared with those of raw yellow illite. The adsorption rate of phosphate generally increases when the mass of illite increases, whereas adsorption quantity decreases with ascending pH. The phosphate adsorption usually increases with ascending illite content or descending particle size. Although the white illite has lower illite content than the yellow, the former has higher phosphate adsorption quantity than the latter. This can be ascribed to the fine particle size, high interlayer charge, and low substitution in tetrahedral site of white illite. The adsorption isotherms of white illite are well fitted with the Langmuir equation, however those of yellow one are better with Freundlich equation.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.327-335
• /
• 1995

Illite/smectite (I/S) in the Beaufort-Mackenzie Basin, Arctic Canada has been scrutinized on the basis of mineralogical analysis of 215 core and drill-cutting samples from 22 exploratory wells onshore and offshore. I/S in the Beaufort-Mackenzie Basin includes the following four types: random, a mixture of random and ordered, R1-ordered, and R>1-ordered I/S. A mixture of random and ordered I/S occurs in the transitional interval between random and R>1-ordered I/S, and may represent a metastable state in the ordering reaction. A widespread occurrence of the mixture in natural environments suggests that the ordering reaction may be a slow process that results in co-existence of reactants and products. K-saturation experiments show that layer charges of expandable layers in I/S are variable. High-charge expandable layers transform into illite-like layers upon simple K-saturation. K-saturation alters the composition and/or the degree of ordering in I/S, suggesting that illitization in nature can be transformational.

• Korean Journal of Poultry Science
• /
• v.32 no.4
• /
• pp.245-254
• /
• 2005

This experiment was conducted to investigate the effect of the supplemental alkali feldspar-ilite(feldspar) on growth performance and meat quality in broiler ducks for 43 days. One hundred eighty broiler ducks were divided into 5 groups of 12ducks. Dietary levels of feldspar 0, 0+antibiotics, 0.5, 1.0 and $1.5\%$ were added to experimental diets of each of the groups. Daily weight gain was slightly increased in 1.0 and $1.5\%$ feldspar treatments. Feed intake was slightly increased at all feldspar treatments. Glucose concentration of serum profile was decreased whereas BUN concentration was significantly increased (p<0.05) at $0.5\%$ feldspar. Cholesterol concentration was decreased at all feldspar treatments, this difference was especially observed in supplemental levels of $0.5\%$ feldspar(p<0.05). Carcass weight was increased at all feldspar treatments. Moisture and crude fat contents of proximate chemical composition in duck meat were decreased at all feldspar treatment, this difference especially was observed in supplemental levels of $1.5\%$ feldspar(p<0.05) on crude fat content. Lightness and yellowness was increased at all feldspar treatment. Cholesterol contents and TBA in meat were decreased, but this parameters were not difference by feldspar treatment. The composition of saturated fatty acids(SFA) was decreased, whereas unsaturated fatty acids(USFA) was slightly increased by feldspar treatment. The Pb content of heavy metal concentrations was increased with compared control, but not difference. The appearance of sensory evaluation was improved by supplemental feldspar, especially in supplemental feldspar, 1.0 and $1.5\%$(p<0.05). The results of this study indicate that the supplemental alkali feldspar may improve the production and meat quality of broiler ducks.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.3
• /
• pp.165-178
• /
• 2011

The potential of petroleum generation was investigated by clay mineralogical changes of illite-smectite on the sedimentary basins: Tertiary Pohang basin and Cretaceouls Gyeongsang basin on land, and offshore basins east and west of Korea. Only disordered illite-smectite mixed layer minerals occur in the Pohang sediment, where petroleum generation cannot be expected due to low temperatures below $100^{\circ}C$. By contrast, the Gyeongsang basin is characterized by the occurrence of illite and high temperatures above $200^{\circ}C$ which are obtained by illite crystallinity. The high temperatures indicate that the Gyeongsang sediment ha, already passed through the oil generation stage. The change of disordered illite-smectite to R-l ordered illite-smectite is shown in the sediment of the East Sea continental shelf area at a depth of 2,500 m. Therefore, the oil generation can be expected in the sediments below the depth of 2,500 m. The sequential change of disordered illite-smectie to R=3 ordered illite-smectite through R=l ordered illite-smectite occurs in the sediments of West Sea continental shelf area with burial depth which shows the favorable condition for oil and gas generation. The temperatures of sediments measured by illite-smectite indicate that hydrocarbon potential is very low in the onland basins but high in the continental shelf areas.