Journal of Energy Engineering (에너지공학)

The Korean Society for Energy (한국에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Characterization of Foamed Concrete Using Calcium sulfaluminate

칼슘설포알루미네이트를 활용한 기포콘크리트의 특성평가

  • Received : 2019.02.11
  • Accepted : 2019.03.13
  • Published : 2019.03.29
Download PDF
⟨ Previous Next ⟩

Abstract

The purposes of this study is to secure subsidence stability and economical efficiency of lightweight foamed concrete. The composition of lightweight foamed concrete was designed for OPC by substituting with constant contents of calcium sulfaluminate and fly ash. It is found that the flow of lightweight foamed concrete decreased with early ettringite formation by CSA. The initial strength increased with the decrease of drying time of lightweight foamed concrete when CSA was substitution to 10%. The settlement deep of foamed concrete improved the settlement stability by replacing CSA, which prevented shortening of the coagulation time and bubble puffing.

본 연구에서는 경량기포콘크리트의 침하안정성 및 경제성을 확보하기 위해 수행되었다. OPC에 fly ash와 Calcium sulfaluminate(CSA)를 일정함량 치환한 배합비를 선정하고 기초물성을 검토하였다. CSA에 의해 조기 ettringite 생성으로 경량기포콘크리트의 플로우가 감소한 것을 확인하였다. 압축강도는 CSA 10%까지 혼입할 경우 경량기포콘크리트의 경화시간 단축으로 인해 초기강도는 증가한 것을 확인하였다. 침하깊이는 CSA를 치환할 경우 응결시간을 단축하여 기포가 소포되는 것을 방지하였기 때문에 침하안정성이 향상되었다.

Keywords

References

  1. The European Cement Association, Innovation in the cement, 2017.
  2. E. Gartner, 2017, What are BYF cements, and how do they differ from CSA cements?, The Future of Cement 200 years after Louis Vicat, pp6-8.
  3. 産業構造審議会産業技術環境分科会, 2017, 革新的セメント製造プロセス基盤技術開発事後評価報告書(案).
  4. Lee, S.H., 2002, Effect of Foaming Agent on the Continuous Voids in Lightweight Cellular Concrete, Journal of the Korea Concrete Institute, Vol. 14, No.5, pp742-749. https://doi.org/10.4334/JKCI.2002.14.5.742
  5. Kim, H.S., Lee, S.H., Sun, J.S., Kim, J.M., 2016, A Physical Properties of Lightweight Foamed Concrete According to Lightweight Aggregate Types and Foaming agent Types, Journal of the Korea Concrete Institute, Vol. 28, No.4, pp435-444. https://doi.org/10.4334/JKCI.2016.28.4.435
  6. M.Roderick Jones., 2013 Behaniour of PC/CSA/FA Blends in Foamed Concrete,World of Coal Ash Conference, pp 22-25.
  7. KS F 4039 Foamed concrete for cast-in-site
  8. Palglia, C., Wombacher, F., Bohni, H., 2001, The Influence of Alkali-free and Alkaline Shoterete Accelerators within Cement systems-I. Characterization of the Setting Behavior, Cement & Concrete Research, Vol. 31, No.2, pp913-918. https://doi.org/10.1016/S0008-8846(01)00509-9
  9. Kim, S. C., Ahn, S. K., 2009, Mix Design and Characteristics of Compressive Strengths for Foam Concrete Associated with the Application of Bottom ash, Journal of the Korea Concrete Institute, Vol. 21, No.3, pp283-290. https://doi.org/10.4334/JKCI.2009.21.3.283
  10. Kim, S. C., Ahn, S. K., 2009, Mix Design and Characteristics of Compressive Strengths for Foam Concrete Associated with the Application of Bottom ash, Journal of the Korea Concrete Institute, Vol. 21, No.3, pp283-290. https://doi.org/10.4334/JKCI.2009.21.3.283
  11. Han S.Y., Han, M.C., 2017, Properties and Mock-up Test of Lightweight Foamed Concrete Based on Blast Furnace Slag by Reducing Admixture, J. Korea Inst. Constr Vol. 17, No.6, pp507-515.
  12. Lee, K.H., Yang, K.H., 2015, Effect of fiber addition for improving the properties of lightweight foamed concrete, J.Korea Inst. Build, Const, Vol. 15, No.4, pp383-389. https://doi.org/10.5345/JKIBC.2015.15.4.383