References
- Kang, H. J., Kim, B. H., Kim, B. H. and Seo, J. H., “Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.058
- Park, S. J., Lee, C. M., Kim, W. and Byun, S. S., “A Study on Structural Analysis of Intergrated Machining Center,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9, No. 1, pp. 49-54, 2010.
- Ku, H. K., Kim, J. W., Won, C. and Song, J. I., “Optimization and Structure Analysis of Brake Disc for Free-fall Winch,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 55-61, 2012.
- Han, M. S. and Cho, J. U., "Structural Analysis on Flange Coupling due to Change of Bolt Numbers," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 57-66, 2012.
- Lee, J. I., "A Study on the Design of Blimp Type Rotor Craft Blade according to Pitch Angle," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 606-611, 2018. https://doi.org/10.17958/ksmt.20.5.201810.606
- Wang, Z. H., Byun, S. J. and Kwon, Y. C., "Fatigue and Vibration Analysis of Table according to Applied Loads," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 5, pp. 568-573, 2018. https://doi.org/10.17958/ksmt.20.5.201810.568
- Wang, Z. H. and Kwon, Y. C., "Structural Analysis of Center Pillar according to Applied Load," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018. https://doi.org/10.17958/ksmt.20.4.201808.401
- Lee, B. H., Lee, C. R., Jeong, Y. J. and Kim, B. H., "A Study on the Structural Analysis of Electric Vehicle Rotor Shaft for Light-Weight," Journal of Korean Society of Mechanical Technology, Vol. 20, No. 2, pp. 154-159, 2018. https://doi.org/10.17958/ksmt.20.2.201804.154
- Lee, J. I., "The Suggestion of Finite Element Modeling Method for Structural Design of Automotive Body," Journal of Korean Society of Mechanical Technology, Vol. 21, No. 2, pp. 311-320, 2019. https://doi.org/10.17958/ksmt.21.2.201904.311
- Park, D. H. and Kwon, H. H., "Development of Automotive Seat Rail Parts for Improving Shape Fixability of Ultra High Strength Steel of 980MPa," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 137-144, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.137
- Cho, S. J., Han, J. W., Park, Y. J. and Lee, G. H., “Structural analysis of a planetary gear carrier in the slewing reducer for tower crane,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 1-7, 2014. https://doi.org/10.14775/ksmpe.2014.13.5.001
- Cho, J. U. and Han, M. S., "Structural Safety Analysis of Car Body," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 7, No. 3, pp. 12-16, 2008.
- Jeong, J., Kwon, S. J., Chu, B. and Park, J., "Unified-type Design and Structural Analysis for Mecanum Wheel Performance Improvement," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 2, pp. 117-123, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.117
-
Jung, S. H., "The Control of Spring-Mass-Damper Convergence System using
$H{\infty}$ Controller and${\mu}-$ Synthesis Controller," Journal of the Korea Convergence Society, Vol. 8, No. 5, pp. 1-11, 2017 https://doi.org/10.15207/JKCS.2017.8.5.001 - Ha, J. S. and Lee, G. M., “A Study on Structure and Vibration Analysis of an Air Suspension Seat,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 47-54, 2017.
Cited by
- 자동차 루프랙의 형상에 따른 구조 해석을 통한 융합 연구 vol.10, pp.12, 2019, https://doi.org/10.15207/jkcs.2019.10.12.257