참고문헌
- M. J. Mathews and S. R. Swanson, "Chanacterijation of the Interlaminer Fracture Toughness of a Laminated Carbon Epoxy Composite", Composites Structure and Technology, Vol. 67, pp. 1489-1498, 2007. https://doi.org/10.1016/j.compscitech.2006.07.035
- T. K. Hwang, J. B. Park, H. G. Kim and Y. D. Doh, "Evaluation of Service life for a Filament Wound Composite Pressure Vessel", Journal Korean Society Composite Materials, Vol. 21, Issue 6, pp. 23-30, 2008.
- A. Kinsey, D. E. J. Saunders and C. Soutis, "Postimpact Compressive Behaviour of Low Temperature curing Woven CFRP Laminar", Journal of Composite Materials, Vol. 26, pp. 661-667, 1995. https://doi.org/10.1177/002199839202600503
- Y. Tomita and K. Morioka, "Effect of Lay-up Sequence on Mechanical Properties and Fracture Behavior of Advanced CFRP Laminate Composite", Material Science and Engineering , A 234-236, pp. 778-781, 1997. https://doi.org/10.1016/S0921-5093(97)00411-5
- O. H. Kwon, Y. S. Yun and Y. R. Ryu, "Machanical Behaviors of CFRP Laminate Composites Reinforced with Aluminum Oxide Powder", Journal of the Korean Society for Power System Engineering, Vol.18, No. 6, pp. 166-173, 2014. https://doi.org/10.9726/kspse.2014.18.6.166
- H. Asauma, O. Haga, J. Ohira, K. Takemoto and M. Imori, "Fabrication of CFRP/Al Active Laminates", JSME International Journal A, Vol. 46, No. 3, pp. 478-483, 2003. https://doi.org/10.1299/jsmea.46.478
- S. Kumar, V. A. Ankem, Y. H. Kim, C. H. Choi, and C. G. Kim , Polybenzimidazole (PBI) Coated CFRP Composite as a Front Bumper Shield for Hypervelocity Impact Resistance in Low Earth Orbit (LEO) Environment, Composites Research, Vol. 31 No. 3, pp. 83-87, 2018. https://doi.org/10.7234/COMPOSRES.2018.31.3.083
- L. Berger, H. H. Kausch and C. J. G. Plummer, "Structure and Deformation Mechanisms in UHMWPE-fibres", Polymer, Vol. 44, Issue 19, pp. 5877-5884, 2003. https://doi.org/10.1016/S0032-3861(03)00536-6
- I. Mesh, I. Amarilo, D. Benes, R. H. Ali, "Delamination Behavior on UHMWPE Soft Layered Composites", Composites B, 98:166-175, 2016. https://doi.org/10.1016/j.compositesb.2016.05.027
- T. A. Bogetti, W. Mattew, S. Jeffrey and C. Julia, "Interlaminar Shear Characterization of Ultra-high Molecular Eeight Polyethylene(UHMWPE) Composite Laminates", Composites Part A: Applied Science and Manufacturing, Vol. 98, pp. 105-115, 2017. https://doi.org/10.1016/j.compositesa.2017.03.018
- K. Karthikeyen, B. P. Russell, N. A. Fleck, H. N. G. Wadley and V. S. Deshpande, "The Effect of Shear Strength on the Ballistic Response of Laminated Composite Plates", Eur. J. Mech.-A/Soild ; Vol. 42, pp. 35-53, 2013. https://doi.org/10.1016/j.euromechsol.2013.04.002
- https://www.curbellplastics.com/Research-Solutions/Technical-Resources/Technical-Resources/UHMW-Data-Sheet
-
D. J. S. Kim, Y. S. Yun and O. H. Kwon, "The Effect of the Reinforced Particles on the Mechanical and Fracture Behaviors of the SiC/
$Al_2O_3$ /Vinyl-Ester Composites", J. Korean Soc. Saf., Vol. 32, No. 3, pp. 1-7, 2017. https://doi.org/10.14346/JKOSOS.2017.32.3.1 - Standard Test Method for Tensile Properties of Plastics, ASTM D 638-03, ASTM Annual Book of Standards, 2003.
- Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites, ASTM D 5528-01, ASTM Annual Book of Standards, 2001.
- M. F. Kanninen, "A New Techniques for Determining Fracture Toughness KIC and its Confidence with Single DCB Specimen", International Journal of Fracture, Vol. 9, pp. 83-92, 197. https://doi.org/10.1007/BF00035958
- V. Mollon, J. Bonhomme, J. Vina and A. Arguells, "Mixed Mode Fracture Toughness: An Empirical Formulation for GI/GII Determination in Asymmetric DCB Specimens", Engineering Structures, Vol. 32, pp. 3699-3703, 2010. https://doi.org/10.1016/j.engstruct.2010.08.014