Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2019.34.3.1

Initial Crack Length Effect for the Interlaminar Mode I Energy Release Rate on a Laminated UHMWPE/CFRP Hybrid Composite  

Song, Sang Min (Department of Safety Engineering, Pukyong National University)
Kang, Ji Woong (Faculty of Health Science, Daegu Haany University)
Kwon, Oh Heon (Department of Safety Engineering, Pukyong National University)
Publication Information
Journal of the Korean Society of Safety / v.34, no.3, 2019 , pp. 1-7 More about this Journal
Abstract
A variety of composite materials are applied to industries for the realization of light weight and high strength. Fiber-reinforced composites have different strength and range of application depending on the weaving method. The mechanical performance of CFRP(Carbon Fiber Reinforced Plastic) in many areas has already been demonstrated. Recently, the application of hybridization has been increasing in order to give a compensation for brittleness of CFRP. Target materials are UHMWPE (Ultra High Molecular Weight Polyethylene), which has excellent cutting and chemical resistance, so it is applied not only to industrial safety products but also to places that lining performance is expected for household appliances. In this study, the CFRP and UHMWPE of plain weave, which are highly applicable to curved products, were molded into laminated hybrid composite materials by autoclave method. The mechanical properties and the mode I failure behavior between the layers were evaluated. The energy release rate G has decreased as the initial crack length ratio increased.
Keywords
fiber-reinforced; laminated hybrid composite; failure behavior; mode I; energy release rate; initial crack length;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 M. J. Mathews and S. R. Swanson, "Chanacterijation of the Interlaminer Fracture Toughness of a Laminated Carbon Epoxy Composite", Composites Structure and Technology, Vol. 67, pp. 1489-1498, 2007.   DOI
2 T. K. Hwang, J. B. Park, H. G. Kim and Y. D. Doh, "Evaluation of Service life for a Filament Wound Composite Pressure Vessel", Journal Korean Society Composite Materials, Vol. 21, Issue 6, pp. 23-30, 2008.
3 A. Kinsey, D. E. J. Saunders and C. Soutis, "Postimpact Compressive Behaviour of Low Temperature curing Woven CFRP Laminar", Journal of Composite Materials, Vol. 26, pp. 661-667, 1995.   DOI
4 Y. Tomita and K. Morioka, "Effect of Lay-up Sequence on Mechanical Properties and Fracture Behavior of Advanced CFRP Laminate Composite", Material Science and Engineering , A 234-236, pp. 778-781, 1997.   DOI
5 O. H. Kwon, Y. S. Yun and Y. R. Ryu, "Machanical Behaviors of CFRP Laminate Composites Reinforced with Aluminum Oxide Powder", Journal of the Korean Society for Power System Engineering, Vol.18, No. 6, pp. 166-173, 2014.   DOI
6 H. Asauma, O. Haga, J. Ohira, K. Takemoto and M. Imori, "Fabrication of CFRP/Al Active Laminates", JSME International Journal A, Vol. 46, No. 3, pp. 478-483, 2003.   DOI
7 S. Kumar, V. A. Ankem, Y. H. Kim, C. H. Choi, and C. G. Kim , Polybenzimidazole (PBI) Coated CFRP Composite as a Front Bumper Shield for Hypervelocity Impact Resistance in Low Earth Orbit (LEO) Environment, Composites Research, Vol. 31 No. 3, pp. 83-87, 2018.   DOI
8 L. Berger, H. H. Kausch and C. J. G. Plummer, "Structure and Deformation Mechanisms in UHMWPE-fibres", Polymer, Vol. 44, Issue 19, pp. 5877-5884, 2003.   DOI
9 T. A. Bogetti, W. Mattew, S. Jeffrey and C. Julia, "Interlaminar Shear Characterization of Ultra-high Molecular Eeight Polyethylene(UHMWPE) Composite Laminates", Composites Part A: Applied Science and Manufacturing, Vol. 98, pp. 105-115, 2017.   DOI
10 K. Karthikeyen, B. P. Russell, N. A. Fleck, H. N. G. Wadley and V. S. Deshpande, "The Effect of Shear Strength on the Ballistic Response of Laminated Composite Plates", Eur. J. Mech.-A/Soild ; Vol. 42, pp. 35-53, 2013.   DOI
11 https://www.curbellplastics.com/Research-Solutions/Technical-Resources/Technical-Resources/UHMW-Data-Sheet
12 M. F. Kanninen, "A New Techniques for Determining Fracture Toughness KIC and its Confidence with Single DCB Specimen", International Journal of Fracture, Vol. 9, pp. 83-92, 197.   DOI
13 D. J. S. Kim, Y. S. Yun and O. H. Kwon, "The Effect of the Reinforced Particles on the Mechanical and Fracture Behaviors of the SiC/$Al_2O_3$/Vinyl-Ester Composites", J. Korean Soc. Saf., Vol. 32, No. 3, pp. 1-7, 2017.   DOI
14 Standard Test Method for Tensile Properties of Plastics, ASTM D 638-03, ASTM Annual Book of Standards, 2003.
15 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites, ASTM D 5528-01, ASTM Annual Book of Standards, 2001.
16 V. Mollon, J. Bonhomme, J. Vina and A. Arguells, "Mixed Mode Fracture Toughness: An Empirical Formulation for GI/GII Determination in Asymmetric DCB Specimens", Engineering Structures, Vol. 32, pp. 3699-3703, 2010.   DOI
17 I. Mesh, I. Amarilo, D. Benes, R. H. Ali, "Delamination Behavior on UHMWPE Soft Layered Composites", Composites B, 98:166-175, 2016.   DOI