DOI QR코드

DOI QR Code

A Experiment of Sprinkler System to Protect Ceiling Joints of Sandwich Panel Warehouses

샌드위치패널 창고의 벽 천장 접합부 방호용 스프링클러설비 실험

  • An, Byung-Kug (Ankug Engineering & Consulting Co) ;
  • Kim, Woon-Hyung (Department of Firesafety., Kyungmin University) ;
  • Seo, Dong-Hun (Industry-Academic Cooperation Foundation Kyungmin University) ;
  • Ham, Eun-Gu (Department Fire Protection & Safety Engineering, Open Cyber University of Korea)
  • Received : 2019.01.05
  • Accepted : 2019.02.27
  • Published : 2019.03.29

Abstract

Purpose: The purpose of this study is to test the sprinkler performance to protect the wall and ceiling joints of the sandwich panel warehouse in case of fire. Method: Based on the field surveys, test was setup and combustibles were prepared. The sprinkler discharge tests were performed at the corner of the wall and right under the sprinkler head. Results: It has been found that operation of the K-80 closed sprinkler head prevents the ignition of the sandwich panel and therefore no damage to the joints of sandwich panels. To prevent skipping phenomenon, it is necessary to install the sprinkler head from the corner of the wall and to keep a minimum distance of 2.4m and a maximum distance of 3m. Conclution: A Standard Operation Procedure should be prepared to suppress and rescue of fire brigade for a sandwich panel warehouse protected by perimeter sprinklers preventing a ignition of core materials and control fire.

연구목적:본 연구는 화재 시 샌드위치패널 구조 창고의 벽 천장접합부 방호를 위한 스프링클러 성능확인 실험을 목적으로 한다. 연구방법: 현장조사결과를 기반으로 창고의 공간규격과 가연물을 선정하고 벽 코너 및 헤드 직하부에서의 방호실험을 수행하고 결과를 분석하였다. 연구결과:벽 코너 화재 시나리오에 대해서 K-80 폐쇄형 스프링클러헤드의 작동으로 샌드위치 패널의 착화 및 접합부 손상이 방지됨을 확인하였다. 결론:샌드위치패널 심재로의 착화 및 연소방지를 통한 화세제어로 이를 가정한 소방대의 소화 및 구조활동을 위한 표준진압대책이 마련되어야 한다.

Keywords

JNJBBH_2019_v15n1_98_f0001.png 이미지

Fig. 1. Place to display interior display mark

JNJBBH_2019_v15n1_98_f0002.png 이미지

Fig. 2. Floor loading (Gyeonggi-do)

JNJBBH_2019_v15n1_98_f0003.png 이미지

Fig. 3. CEP Commodity

JNJBBH_2019_v15n1_98_f0004.png 이미지

Fig. 4. Head installation by fire location

JNJBBH_2019_v15n1_98_f0005.png 이미지

Fig. 5. Experimental setup

JNJBBH_2019_v15n1_98_f0006.png 이미지

Fig. 6. sprinkler head

JNJBBH_2019_v15n1_98_f0007.png 이미지

Fig. 7. Sprinkler head placement

JNJBBH_2019_v15n1_98_f0008.png 이미지

Fig. 10. Corner Fire Experiment progress (1)

JNJBBH_2019_v15n1_98_f0009.png 이미지

Fig. 11. Corner Fire Experiment progress (2)

JNJBBH_2019_v15n1_98_f0010.png 이미지

Fig. 12. Corner Fire - Temperature history

JNJBBH_2019_v15n1_98_f0011.png 이미지

Fig. 13. Under head Fire Experiment progress

JNJBBH_2019_v15n1_98_f0012.png 이미지

Fig. 14. Under head Fire - Temperature history

JNJBBH_2019_v15n1_98_f0013.png 이미지

Fig. 8. Thermocouple location

JNJBBH_2019_v15n1_98_f0014.png 이미지

Fig. 9. Ignition source

References

  1. Cho, G.-H., Yeo, I.-H. (2016). "A Study on the Fire Characteristics of Palletized Unit-Load Commodities on Racks." Fire Science and Engineering, Vol.30, No.3, pp.23-30. https://doi.org/10.7731/KIFSE.2016.30.3.023
  2. FM Global (2014). Property Loss Prevention Data Sheets 1-57, Plastic construction
  3. FM Global (2015). Property Loss Prevention Data Sheets 8-9, Storage of Class 1, 2, 3, 4 and Plastic Commodities
  4. Jang, J.-H., Yoon, S.-C., An, B.-K. (2017). "A Study on Architectural Countermeasures of Maintenance Aspect for the Fire Fighting Activity in the Sandwich Panel Warehouses." Korean Society of Hazard Mitigation Journal, Vol.17, No.6, pp.11-18. https://doi.org/10.9798/KOSHAM.2017.17.6.11
  5. Kim, J.-G. (2015). Defects of a Ceiling Collapse by Loads in the event of a Sandwich Panel Building Fire(Priorities identified via a practiced experiment). M.S Dissertation, Graduate School, University of Seoul.
  6. Kim, W.-H., Lee, Y.-J. (2014). "An Improvement of Fire Safety Code for Rack-Type Warehouse in Korea." Fire Science and Engineering, Vol.28, No.6, pp.69-75. https://doi.org/10.7731/KIFSE.2014.28.6.069
  7. Kim, W.-H., Lee. Y.-J. (2016). "A Field Survey of Rack-Type Warehouse for Commodity Classification System in Korea." Fire Science and Engineering, Vol. 30, No. 2, pp. 98-105. https://doi.org/10.7731/KIFSE.2016.30.2.098
  8. Korea Ministry of Government Legislation (2018). Act on Fire Prevention and Installation, Maintenance, and Safety Control of Fire-Fighting Systems.
  9. MOLIT (2017). Year of 2015, Year of 2016 sandwich panel factory and warehouse facilities building.
  10. National Fire Safety Code 103, "Fire Safety Code for Automatic Sprinkler System".
  11. National Fire Safety Code 103B, "Fire Safety Code for Early suppression of fire Sprinkler System".
  12. Seo, D.-H., Kim, W.-H., Kim, J.-H., Lee, Y,-J. (2017). "An Experimental Study of Sprinkler system for Sandwich Panel Wall Protection." Fire Science and Engineering, Vol.31, No.5, pp.37-43. https://doi.org/10.7731/KIFSE.2017.31.5.037
  13. The Ministry of Public Safety and Security, Republic of Korea (2018). E-Fire Statistical.