DOI QR코드

DOI QR Code

공동주택 설비공사 계획업무의 성과지표에 미치는 영향분석

Analysis of the Impact of Construction Planning Tasks on Project Cost and Schedule Success in Residential Projects

  • Kim, Dae Young (Department of Architectural Engineering, Pusan National University) ;
  • Lim, Hyoungchul (Department of Architectural Engineering, Changwon National University) ;
  • Kim, Daeyoung (Department of Architectural Engineering, Kyungnam University) ;
  • Huh, Youngki (Department of Architectural Engineering, Pusan National University)
  • 투고 : 2018.12.06
  • 심사 : 2018.12.28
  • 발행 : 2019.05.31

초록

본 연구의 주목적은 공동주택 설비 계획 단계에서 수행되는 업무들을 파악하고 성과지표에 영향을 줄 수 있는 주요 계획업무를 분석하여 프로젝트의 성과에 미치는 영향을 분석하는데 있다. 계획업무의 성과지표에 대한 영향 분석을 위하여 설비공사의 계획업무를 크게 5개의 주요업무로 구분하고 각각을 공정계획(P1~P6), 시공계획(C1~C5), 환경관리계획(E1~E4), 품질관리계획(Q1~Q5), 안전관리계획(S1~S5)으로 명명하고, 각각의 주요 업무를 세분화 시켜 총 25개의 세부 계획업무로 분류하여 원가에 대한 영향을 분석하기 위해 independent t-test를 실시하였다. 각각의 주요 업무를 세분화 시켜 총 25개의 세부 계획업무로 분류하여 원가에 대한 영향을 분석하기 위해 independent t-test를 실시하였다. 프로젝트 목표 달성에 따른 중요도를 비교하여 유의도 0.05 이하에 대해 원가뿐만 아니라 공기의 성과지표에 공통적으로 영향을 미치는 구체적인 중요 공사의 계획업무를 파악하였다.

The main purpose of this study is to analyze the impact of the cost estimates on the construction work in residential apartment housing facilities. The planning work of facility construction is roughly divided into five main tasks which are further broken down into the following: process plan (P1-P6), construction plan (C1-C5), environmental management plan (E1-E4), quality management plan (Q1-Q5) and the safety management plan (S1-S5). In this study these tasks were classified into 25 detailed planning duties and a statistical analysis was performed on each one to determine its impact on cost. Finally this study derives from major planning tasks for effective cost management through correlation between planning tasks, cost indicators and t-test.

키워드

GGRHC4_2019_v20n3_31_f0001.png 이미지

Fig. 1. Research methods and scope

GGRHC4_2019_v20n3_31_f0002.png 이미지

Fig. 2. The Cost and Time of construction and its effect on the facility planning phase

Table 1. Research Trends in the inside of the country

GGRHC4_2019_v20n3_31_t0001.png 이미지

Table 2. Research Trends in the outside of the country

GGRHC4_2019_v20n3_31_t0002.png 이미지

Table 3. Facility construction plan scheme

GGRHC4_2019_v20n3_31_t0003.png 이미지

Table 4. Analysis of construction planning and its effect on construction schedule

GGRHC4_2019_v20n3_31_t0004.png 이미지

Table 5. Analysis of work flow planning and its effect on construction cost

GGRHC4_2019_v20n3_31_t0005.png 이미지

Table 6. Comparison of Construction time with Cost in Relation to the planning phase

GGRHC4_2019_v20n3_31_t0006.png 이미지

참고문헌

  1. Arena, P., Caponetto, R., Fortuna, L., and Xibilia, M. G. (1992). "Genetic algorithms to select optimal neural network topology." In Circuits and Systems, Proceedings of the 35th Midwest Symposium on, pp. 1381-1383.
  2. Ashworth A. Cost studies of buildings (1999). Harlow:Addison Wesley Longman Ltd, 3rd ed. UK, p. 444.
  3. Ballard, G. (2000). "Lean project delivery system." Lean Construction Institute White, Lean Construction Institute, Ketchum, Id., p. 8.
  4. Ballard, G., Harper, N., and Zabelle, T.R. (2003). "Learning to see work flow: an application of lean concepts to precast concrete fabrication." Engineering Construction and Architectural Management, 10(1), pp. 6-14. https://doi.org/10.1108/09699980310466505
  5. Ballard, G., and Howell, G. (1998). "Shielding Production: Essential Step in Production Control." Journal of Construction Engineering and Management, 124(1), pp. 11-17. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:1(11)
  6. Ballard, G., and Howell, G. (2003). "Lean Project Management." Building Research & Information, 31(2), pp. 119-133. https://doi.org/10.1080/09613210301997
  7. Ballard, G., and Zabelle, T.R. (2000). "Lean design: Process, tools, and techniques." Lean Construction Institute White Paper No. 10, Lean Construction Institute, Ketchum, Id.
  8. Cha, H.S., and Kim, T.K. (2008). "Developing measurement system for key performance indicators on building construction projects." Korean Journal of Construction Engineering and Management, KICEM, 9(4), pp. 120-130.
  9. Cho, Y.S., and Cha, H.S. (2010). "A Study of project characteristics and project performance level of difficulty." Korean Journal of Construction Engineering and Management, KICEM, 11(6), pp. 78-88. https://doi.org/10.6106/KJCEM.2010.11.6.78
  10. CII. (2011). Enhanced work packaging: Design through workface execution (Doctoral dissertation).
  11. COAA (Construction Owners Association of Alberta). (2007). Workface planning model and implementation guide.
  12. Elazouni, A.M., Ali, A.E., and Abdel-Razek, R.H. (2005). "Estimating the acceptability of new formwork systems using neural networks." Journal of construction engineering and management, 131(1), pp. 33-41. https://doi.org/10.1061/(ASCE)0733-9364(2005)131:1(33)
  13. ELECTRI International (2009). Construction Project Management: A Practical Guide for Building and Electrical Contractors, J. Ross Publishing, Fort Lauderdale, FL.
  14. Guo, S.J. (2002). "Identification and Resolution of Work Space Conflicts in Building Construction." Journal of Construction Engineering and Management, 128(4), pp. 287-295. https://doi.org/10.1061/(ASCE)0733-9364(2002)128:4(287)
  15. Hanna, A.S., and Skiffington, M.A. (2010). "Effect of Preconstruction Planning Effort on Sheet Metal Project Performance." Journal of Construction Engineering and Management, 136(2), pp. 235-241. https://doi.org/10.1061/(ASCE)0733-9364(2010)136:2(235)
  16. Horman, M.J., Orosz, M.P., and Riley, R.D. (2006). "Sequence Planning for Electrical Construction." Journal of Construction Engineering and Management, 132(4), pp. 363-372. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:4(363)
  17. Kim, D.W., An, S.H., Cho, H., Jeong, J.W., Lee, B.H., Doh, N.L., and Kang, K.I. (2009). "Development of conceptual model of construction factory for automated construction." Building and Environment, 44(8), pp. 1634-1642. https://doi.org/10.1016/j.buildenv.2008.10.009
  18. Koo, B. (2008). "Analyzing Site Reliability for Residential, Civil and Plant Projects using Lean Construction Principles." Journal of The Korean Society of Civil Engineers, 28(5D), pp. 655-664.
  19. Ko, Y.J., and Cha, H.S. (2011). "A Development of Project Performance Predicting System (PPS) considering Construction Project Characteristics." Korean Journal of Construction Engineering and Management, KICEM, 12(1), pp. 62-72. https://doi.org/10.6106/KJCEM.2011.12.1.62
  20. Lee, H. (2006). "An Improvement Scheme of Process Quality in The Korean Building Projects." Journal of the Korean Association for Spatial Structures, 6(3), pp. 51-57.
  21. Lee, H.S., Lee, B.N., Kim, W.Y., Yoo, J.H., and Song, S.H. (2005). "A Study on the Evaluation of PMIS and Development Strategy for Construction Companies." Korea Institute of Construction and Industry, p. 121.
  22. Menches, C.L., and Hanna, A.S. (2006). "Conceptual Planning Process for Electrical Construction." Journal of Construction Engineering and Management, 132(12), pp. 1306-1313. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:12(1306)
  23. Nasr, Z.J.B. (2009). "Electrical Project Management Model." The University of Texas at Austin, Austin.
  24. Park, J.I. (2005). Technical Status of Building Equipment Korean Society for Mechanical Engineering lecturers and other publications, pp. 5-19.
  25. Reder AD. Cost model for reinforced concrete beam and slab structures in building [dissertation]. Fort Collins: Colorado State University; 2005. pp. 150.
  26. Ryu, H.G., and Son, B.S. (2010). "Problems and Suggestions for Improvement Derived from an Analysis of the Work of the Urban & Residence Environment Improvement Project-Focused on the Establishment of Preparation Committee and Association Committee." Journal of the Korea Institute of Building Construction, 10(3), pp. 39-47. https://doi.org/10.5345/JKIC.2010.10.3.039
  27. Singh, S. (1990). "Cost model for reinforced concrete beam and slab structures in buildings." Journal of Construction Engineering and Management, 116(1), pp. 54-67. https://doi.org/10.1061/(ASCE)0733-9364(1990)116:1(54)
  28. Wilson AJ. Experiments in probabilistic cost modelling (1983). In: Brandon PS, editor. Building Cost Techniques; New Direction. London: E&FN Spon, pp. 169-80.
  29. Yu, I.H., Jung, Y.S., Chin, S.Y., and Kim, K.R. (2006). "Analysis of quantified characteristics of the performance indicators for construction companies." Korean Journal of Construction Engineering and Management, KICEM, 7(4), pp. 154-163.