References
- I. Younker and M. Fratoni, "Neutronic Evaluation of Coating and Cladding Materials for Accident Tolerant Fuels", Prog. Nucl. Energy, 88, 10-18 (2016). https://doi.org/10.1016/j.pnucene.2015.11.006
- M.Q. Awan, L. Cao, and H. Wu, "Neutronic Design and Evaluation of a PWR Fuel Assembly with Accident Tolerant-fully Ceramic Micro-encapsulated (AT-FCM) Fuel", Nucl. Eng. Des., 319, 126-139 (2017). https://doi.org/10.1016/j.nucengdes.2017.04.019
-
K.D. Johnson, A.M. Raftery, D.A. Lopes, and J. Wallenius, "Fabrication and Microstructural Analysis of UN-
$U_3Si_2$ Composites for Accident Tolerant Fuel Applications", J. Nucl. Mater., 477, 18-23 (2016). https://doi.org/10.1016/j.jnucmat.2016.05.004 - C.P. Deck, G.M. Jacobsen, J. Sheeder, O. Gutierrez, J. Zhang, J. Stone, H.E. Khalifa, and C.A. Back, "Characterization of SiC-SiC Composites for Accident Tolerant Fuel Cladding", J. Nucl. Mater., 466, 667-681 (2015). https://doi.org/10.1016/j.jnucmat.2015.08.020
- X. Wu, T. Kozlowski, and J.D. Hales, "Neutronics and Fuel Performance Evaluation of Accident Tolerant Fe-CrAl Cladding under Normal Operation Conditions", Ann. Nucl. Energy, 85, 763-775 (2015). https://doi.org/10.1016/j.anucene.2015.06.032
- J.H. Park, H.G. Kim, J.Y. Park, Y.I. Jung, D.J. Park, and Y.H. Koo, "High Temperature Steam-oxidation Behavior of Arc Ion Plated Cr Coatings for Accident Tolerant Fuel Claddings", Surf. Coat. Technol., 280, 256-259 (2015). https://doi.org/10.1016/j.surfcoat.2015.09.022
- J.G. Stone, R. Schleicher, C.P. Deck, G.M. Jacobsen, H.E. Khalifa, and C.A. Back, "Stress Analysis and Probabilistic Assessment of Multi-layer SiC-based Accident Tolerant Nuclear Fuel Cladding", J. Nucl. Mater., 466, 682-697 (2015). https://doi.org/10.1016/j.jnucmat.2015.08.001
- Y.H. Koo, J.H. Yang, J.Y. Park, K.S. Kim, H.G. Kim, D.J. Kim, Y.I. Jung, and K.W. Song, "KAERI's development of LWR accident-tolerant fuel", Nucl. Technol., 186(2), 295-304 (2014). https://doi.org/10.13182/NT13-89
-
D.J. Kim, K.S. Kim, D.S. Kim, J.S. Oh, J.H. Kim, J.H. Yang, and Y.H. Koo, "Development Status of Microcell
$UO_2$ Pellet for Accident-tolerant Fuel", Nucl. Eng. Technol., 50(2), 253-258 (2018). https://doi.org/10.1016/j.net.2017.12.008 -
L.N. Grossman, "Interactions in the System Cs(g, l)-
$SiO_2-Al_2O_3$ ", Rev. Int. Hautes Temp. Refract., 16(3), 255-261 (1979). - J. Matsunaga, Y. Takagawa, K. Kusagaya, K. Une, R. Yuda, and M. Hirai, "Fundamentals of GNF Al-Si-O Additive Fuel", Proc. of Top Fuel 2009, September 6, 2009, Paris, France.
- J. Matsunaga, K. Une, and K. Kusagaya, "Chemical Trap Effect of Aluminosilicate Additive Fuel", Proc. of Top Fuel 2010, September 26, 2010, Orlando, USA.
- A. Roine, Outokumpu HSC Chemistry for Windows, Outokumpu Research Oy: Pori, Finland (2002).
- K. S. Lee, Introduction to Nuclear Fuels, 1st ed., 180, Hyoil Press, Seoul (2001).
- T.B. Lindemer, T.M. Besmann, and C.E. Johnson, "Thermodynamic Review and Calculations - alkali Metal Oxide Systems with Nuclear Fuels, Fission Products and Structural Materials", J. Nucl. Mater., 100(1-3), 178-226 (1981). https://doi.org/10.1016/0022-3115(81)90533-X
-
C.T. Walker, C. Bagger, and M. Mogensen, "Observations on the Release of Cesium from
$UO_2$ Fuel", J. Nucl. Mater., 240(1), 32-42 (1996). https://doi.org/10.1016/S0022-3115(96)00477-1 - J. Spino and P. Peerani, "Oxygen Stoichiometry Shift of Irradiated LWR-fuels at High Burn-ups: Review of Data and Alternative Interpretation of Recently Published Results", J. Nucl. Mater., 375(1), 8-25 (2008). https://doi.org/10.1016/j.jnucmat.2007.10.007
-
Hj. Matzke, "Oxygen Potential in the Rim Region of High Burn up
$UO_2$ Fuel", J. Nucl. Mater., 208(1-2), 18-26 (1994). https://doi.org/10.1016/0022-3115(94)90193-7 -
Hj. Matzke, "Oxygen Potential Measurements in High Burn up LWR
$UO_2$ Fuel", J. Nucl. Mater., 223(1), 1-5 (1995). https://doi.org/10.1016/0022-3115(95)00004-6
Cited by
- 핵분열 기체 포획 기능을 갖는 사고저항성 UO2 펠렛에서 형성되는 입계상의 미세구조 관찰 vol.27, pp.2, 2019, https://doi.org/10.4150/kpmi.2020.27.2.119