한국수소및신에너지학회논문집 (Transactions of the Korean hydrogen and new energy society)

  • 제30권6호
  • /
  • Pages.513-522
  • /
  • 2019
  • /
  • 1738-7264(pISSN)
  • /
  • 2288-7407(eISSN)
한국수소및신에너지학회 (The Korean Hydrogen and New Energy Society)
권호 표지
DOI QR코드

DOI QR Code

모델링 및 시뮬레이션을 통한 수소충전 프로토콜 영향인자 평가

Evaluation of Influential Factors of Hydrogen Fueling Protocol by Modeling and Simulation

  • 투고 : 2019.11.18
  • 심사 : 2019.12.30
  • 발행 : 2019.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

It is not easy to refuel quickly and safely with 70 MPa hydrogen. This is because the temperature in the vehicle tank rises sharply due to Joule-Thomson effect, etc. Thus protocols such as SAE J2601 in the United States and JPEC-S 0003 in Japan were established. However, they have the problem of over-complexity and lack of versatility by setting the preconditions for hot and cold cases and introducing a number of look-up tables. This study was conducted with the ultimate goal of developing new protocols based on complete real-time communication. Thermodynamic models were made and programs were developed for hydrogen refueling simulations. Simulation results confirmed that there are five parameters in the influencing factors of the hydrogen refueling protocol.

키워드

참고문헌

  1. Society of Automotive Engineers (SAE), "Fueling protocols for light duty gaseous hydrogen surface vehicles (Standard J2601_201612)", 2016, doi: https://doi.org/10.4271/j2601_201612.
  2. J. Schneider, G. Meadows, S. R. Mathison, M. J. Veenstra, J. H. Shim, R. Immel, M. Wistoft-Ibsen, S. Quong, M. Greisel, T. McGuire, and P. Potzel, "Validation and Sensitivity Studies for SAE J2601, the Light Duty Vehicle Hydrogen Fueling Standard", SAE Int. J. Alt. Power, Vol. 3, No. 2, 2014, doi: https://doi.org/10.4271/2014-01-1990.
  3. E. D. Rothuizen, "Hydrogen Fuelling Stations: A Thermodynamic Analysis of Fuelling Hydrogen Vehicles for Personal Transportation", Ph.D. Dissertation, Technical University of Denmark, Kongens Lyngby Denmark, 2013. Retrieved from https://orbit.dtu.dk/en/publications/hydrogen-fuelling-stations-a-thermodynamic-analysis-offuelling-h.
  4. K. Handa and S. Yamaguchi, "Development of Realtime Pressure Loss Compensation Method for Hydrogen Refueling Station to Increase Refueling Amounts", J. Automatic Engineering, Vol. 9, No. 4, 2018, pp. 310-315, doi: https://doi.org/10.20485/jsaeijae.9.4_310.
  5. S. Yamaguchi, Y. Fujita, and K. Handa, "New Tank Volume Estimation Method for Hydrogen Fueling", Society of Automotive Engineers of Japan, 2018.
  6. Y. A. Cengel and M. A. Boles, "Thermodynamics: An Engineering Approach", 5th ed, McGraw-Hill, USA, 2006, pp. 227-232.
  7. M. Deymi-Dashtebayaz, M. Farzaneh-Gord, and H. R. Rahbari, "Simultaneous thermodynamic simulation of CNG filling process", J. Chemical Technology, Vol. 16, No. 1, 2014, pp. 7-14, doi: https://doi.org/10.2478/pjct-2014-0002.
  8. M. Deymi-Dashtebayaz, M. Farzaneh-Gord, N. Nooralipoor, and H. Niazmand, "The Complete Modelling of the Filling Process of Hydrogen Onboard Vehicle Cylinders", Brizilian J. Chemical Engineering, Vol. 33, No. 2, 2016, pp. 391-399, doi: https://doi.org/10.1590/0104-6632.20160332s20140209.
  9. M. Mond and M. Kosaka "Understanding of Thermal Characteristics of Fueling Hydrogen High Pressure Tanks and Governing Parameters", J. Alt. Power, Vol. 2, N. 1, 2013, pp. 61-67, doi: https://doi.org/10.4271/2013-01-0474.
  10. J. Xiao, S. Ma, X. Wang, S. Deng, T. Yang, and P. Benard, "Effect of Hydrogen Refueling Parameters on Final State of Charge", J. Energies, Vol. 12, No. 4, 2019, pp. 645, doi: https://doi.org/10.3390/en12040645.
  11. M. Farzaneh-Gord, M. Deymi-Dashtebayaz, H. R. Rahbari, and H. Niazmand, "Effects of storage types and conditions on compressed hydrogen fuelling stations performance", J. Hydrogen Energy, Vol. 37, No. 4, 2012, pp. 3500-3509, doi: https://doi.org/10.1016/j.ijhydene.2011.11.017.
  12. Y. A. Cengel and A. J. Ghajar, "Heat and Mass Transfer: Fundamentals and Applications", 5th ed, McGraw-Hill, USA, 2015, pp. 18, 334-337.
  13. T. Kuroki, N . Sakoda, K. Shinzato, M . Monde, and Y. Takata, "Prediction of transient temperature of hydrogen flowing from pre-cooler of refueling station to inlet of vehicle tank", International J. of Hydrogen Energy, Vol. 43, No. 3, 2018, pp. 1846-1854, doi: https://doi.org/10.1016/j.ijhydene.2017.11.033.
  14. P. L. Woodfield, M. Monde, and T. Takano, "Heat Transfer Characteristics for Practical Hydrogen Pressure Vessels Being Filled at High Pressure", J. Thermal Science and Technology, Vol. 3, No. 2, 2008, pp. 241-253, doi: https://doi.org/10.1299/jtst.3.241.
  15. M. Monde, P. Woodfield, T. Takano, and M. Kosaka, "Estimation of temperature change in practical hydrogen pressure tanks being filled at high pressures of 35 and 70 MPa", J. Hydrogen Energy, Vol. 37, No. 7, 2012, pp. 5723-5734, doi: https://doi.org/10.1016/j.ijhydene.2011.12.136.
  16. M. Heath, P. L. Woodfield, W. Hall, and M. Monde, "An experimental investigation of convection heat transfer during filling of a composite-fibre pressure vessel at low Reynolds number", Experimental Thermal and Fluid Science, Vol. 54. 2014, pp. 151-157, doi: https://doi.org/10.1016/j.expthermflusci.2014.02.001.
  17. T. Bourgeois, F. Ammouri, M. Weber, and C Knapik, "Evaluating the temperature inside a tank during a filling with highly-pressurized gas", J. Hydrogen Energy, Vol. 40, No. 35, 2015, pp. 11748-11755, doi: https://doi.org/10.1016/j.ijhydene.2015.01.096.
  18. J. Guo, J. Yang, Y. Zhao, X. Pan, L. Zhang, L. Zhao, and J. Zheng, "Investigations on temperature variation within a type III cylinder during the hydrogen gas cycling test", Vol. 13, No. 25, 2014, pp. 13926-13934, doi: https://doi.org/10.1016/j.ijhydene.2014.03.097.
  19. P. L. Woodfield, M. Monde, and Y. Mitsutake, "Measurement of Averaged Heat Transfer Coefficients in High-Pressure Vessel during Chagring with Hydrogen Nitrogen or Argon Gas", J. Thermal Science and Technology, Vol. 2, No. 2, 2007, pp. 180-191, doi: https://doi.org/10.1299/jtst.2.180.
  20. T. Kuroki, N. Sakoda, K. Shinzato, M. Monde, and Y. Takata, "Dynamic simulation for optimal hydrogen refueling method to Fuel Cell Vehicle tanks", J. Hydrogen Energy, Vol. 43, No. 11, 2018, pp. 5714-5721, doi: https://doi.org/10.1016/j.ijhydene.2018.01.111.
  21. D. G. Casey. "Method for Calculating Hydrogen Temperature During Vehicle Fueling", Patent No.: US 7,647,194 B1, 2010. Retrieved from https://patentimages.storage.googleapis.com/9a/0e/15/a4a42fb4da4519/US7647194.pdf.
  22. M. Monde, Y. Mitsutake, P. L. Woodfield, and S. Maruyama, "Characteristics of Heat Transfer and Temperature Rise of Hydrogen during Rapid Hydrogen Filling at High Pressure", J. Heat Transfer-Asian Research, Vol. 36, No. 1, 2007, pp. 13-27, doi: https://doi.org/10.1002/htj.20140.
  23. J. Xiao, P. Benard, and R. Chahine, "Charge-discharge cycle thermodynamics for compression hydrogen storage system", J. Hydrogen Energy, Vol. 41, No. 12, 2016, pp. 5531-5539, doi: https://doi.org/10.1016/j.ijhydene.2015.12.136.
  24. E. W. Lemmon, M. L. Huber, and J. W. Leachman, "Revised Standardized Equation for Hydrogen Gas Densities for Fuel Consumption Applications", J. Res. Natl. Inst. Stand. Technol, Vol. 113, No. 6, 2008, pp. 341-350, doi: https://doi.org/10.6028/jres.113.028.
  25. H. Chen, J. Zheng, P. Xu, L. Li, Y. Liu, and H. Bie, "Study on real-gas equations of high pressure hydrogen", J. Hydrogen Energy, Vol. 35, No. 7, 2010, pp. 3100-3104, doi: https://doi.org/10.1016/j.ijhydene.2009.08.029.