DOI QR코드

DOI QR Code

A Study on Simulation for Decreasing Energy Demand According to Window-to-Wall Ratio and Installation Blind System in Building

블라인드 도입과 창면적비에 따른 표준건축물의 에너지 수요 저감에 대한 시뮬레이션 연구

  • 강석민 (솜피 한국지사) ;
  • 이태규 (상명대학교 일반대학원 에너지그리드학과) ;
  • 김정욱 (상명대학교 전기전자컴퓨터학부 전기공학과)
  • Received : 2018.06.29
  • Accepted : 2018.11.21
  • Published : 2018.12.31

Abstract

Building energy demands have highly risen in modern society; thus, It is necessary to reduce building energy demands especially commercial buildings adopting a curtain wall architecture. Curtain wall architectures have a high ratio of windows which is a vulnerable in heat insulations as cladding. In order to complement insulation performance of windows in these buildings, there are various methods adopted often such as installing blinds, wing wall and films. There are two suggestions of this paper. 1) WWR (Window-to-Wall Ratio) makes a impaction of energy demands in buildings. 2) Another one is an efficiency of blind systems which are installed in buildings in order to reduce cooling demands. It is also critical to make fundamental model for low-energy building construction by processing a lot of simulation As a result by this study, 1) an external blind system is more useful for reducing cooling energy demands rather than an internal blind system. 2) Buildings which have a large window require more amount of cooling demands. In case of WWR 45%, it needs more cooling energy rather than WWR 15% model's 3) Adopting blind system would reduce energy demands. WWR 45% model with external blind systems reduces about 4% of cooling energy demands compared to same model without any blind systems.4) it is necessary to study an efficiency of blind systems combined with renewable energy and it will be possible to reduce more energy demand in building significantly.

Keywords

Acknowledgement

Supported by : 한국에너지기술평가원

References

  1. 권혁주, 이금호, 이광호. (2017). 건물에너지 저감을 위한 향별 슬랫형 블라인드의 최적 각도 제어 알고리즘 산출. 한국생태환경건축학회 논문집, 17(3), 99-106.
  2. 노상태, 김강수, 정진세. (2007). 초고층 커튼월 외피 열성능해석 프로그램 개발에 관한 연구. 설비공학논문집, 19(1), 10-18.
  3. 윤여범, 김동수, 박장우, 이광호. (2013). 내. 외부 블라인드 운영방법과 창호성능에 따른 건물에너지 성능 평가 연구. 대한건축학회 논문집 - 계획계, 29(7), 309-316.
  4. 이준기, 이갑택, 이경희. (2015). 발코니 유형 및 블라인드 설치 유무에 따른 에너지 부하량 비교. 한국동력기계공학회지, 19(3), 63-68. https://doi.org/10.9726/kspse.2015.19.3.063
  5. 장철용, 한혜심, 이진숙. (2010). 차폐계수와 창면적비에 따른 공동주택의 건물에너지효율등급 평가, 한국태양에너지학회 논문집, 30(5), 38-43
  6. 정유근. (2013). 블라인드를 고려한 여름철 소규모 사무소 건물의 냉방 및 조명에너지 평가. 한국생태환경건축학회 논문집, 13(1), 39-45.
  7. 정우람, 오명환, 이광호, 윤종호. (2012). 사무소건물의 실내 롤블라인드 설치에 따른 하절기 온열환경 평가. 한국건축친환경설비학회 학술발표대회 논문집, 66-69.