참고문헌
- B. A. Movchan, F. D. Lemkey, 1997, Mechanical properties of fine-crystalline two-phase materials, Mater. Sci. Eng. A, Vol. 224, No. 1-2, pp. 136-145. https://doi.org/10.1016/S0921-5093(96)10455-X
- G. Heness, R. Wuhrer, W. Y. Yeung, 2008, Interfacial strength development of roll-bonded aluminium/copper metal laminates, Mater. Sci. Eng. A, Vol. 483-484, No. 1, pp. 740-742. https://doi.org/10.1016/j.msea.2006.09.184
- S. T. Hong, K.S. Weil, I. T. Bae, J. P. Choi, J. Pan, 2010, Annealing induced interfacial layers in niobium-clad stainless steel developed as dipolar plate material for polymer electrolyte membrane fuel cell stacks, J. Power Sources, Vol. 195, No. 9, pp. 2592-2598. https://doi.org/10.1016/j.jpowsour.2009.10.034
- L. Ghalandari, M. M. Moshksar, 2010, High-strength and high-conductive Cu/Ag multilayer produced by ARB, J. Alloys Compd., Vol. 506, No. 1, pp. 172-178. https://doi.org/10.1016/j.jallcom.2010.06.172
- F. Nowicke, A. Zavaliangos, H. C. Rogers, 2006, The effect of roll and clad sheet geometry on the necking instability during rolling of clad sheet metals, Int. J. of Mechanical Sciences, Vol. 48, No. 8, pp. 868-877. https://doi.org/10.1016/j.ijmecsci.2006.01.021
- S. H. Choi, K. H. Kim, K. H. Oh, D. N. Lee, 1997, Tensile deformation behavior of stainless steel clad aluminum bilayer sheet, Mater. Sci. and Eng. A, Vol. 222, No. 2, pp. 158-165. https://doi.org/10.1016/S0921-5093(96)10514-1
- K. Osakada, K. Mori, 1987, Prediction of Ductile Fracture in Cold Forging, CIRP Annals, Vol. 27, No. 1, pp. 135-139.
- F. A. McClintock, 1968, A Criterion for Ductile Fracture by the Growth of Hole, J. Appl. Mech., Vol. 35, No. 2, pp. 363-371. https://doi.org/10.1115/1.3601204
- T. C. Lee, L. C. Chan, P. F. Zheng, 1997, Application of the Finite-Element Deformation Method in the Fine Blanking Process, J. of Mater. Process. Tech, Vol. 63, No. 1-3, pp. 744-749. https://doi.org/10.1016/S0924-0136(96)02717-3
- A. K. Ghosh, 1976, A criterion for ductile fracture in sheets under biaxial loading, Metallurgical Transactions, Vol. 7, No. 4, pp. 523-533. https://doi.org/10.1007/BF02643968
- M. G. Cockcroft, D.J. Latham, 1968, Ductility and the Workability of Metals, J. Inst. Metals, Vol. 96, pp. 33-39.