참고문헌
- H. Ohkubo and S. Nishio, "Study on Mist Cooling for Heat Treatment of Metals", J. of Materials Processing & Manufacturing Science, Vol. 2, 1993, pp. 14-27.
- W. J. Yang and D. W. Clark, "Spray Cooling of Air-cooled Compact Heat Exchangers", Int. J. of Heat & Mass Transfer, Vol. 18-2, 1975, pp. 311-317. https://doi.org/10.1016/0017-9310(75)90162-3
- A. Yamanouchi, "Effect of Core Spray Cooling in Transient State after of Coolant Accident", J. of Nuclear Science & Technology, Vol. 5-11, 1968, pp. 547-558. https://doi.org/10.1080/18811248.1968.9732513
- D. B. Spalding, "The Combustion of Liquid Fuels", Fourth Symposium on Combustion, 1953, pp. 847-864.
- E. C. Silk, J. Kim and K. Kiger, "Spray Cooling of Enhanced Surfaces (Impact of Structured Surface Geometry and Spray Axis Inclination)", Int. J. of Heat & Mass Transfer, Vol. 49, 2006, pp. 4910-4920. https://doi.org/10.1016/j.ijheatmasstransfer.2006.05.031
- M. S. Sehmbey, L. C. Chow, O. J. Hahn and M. R. Pais, "Spray Cooling of Power Electronics at Cryogenic Temperature", J. of Thermo-physics & Heat Transfer, Vol. 9-1, 1995, pp. 123-128. https://doi.org/10.2514/3.637
- S. Nukiyama, "The Maximum and Minimum Values of Heat Transmitted from Metal to Boiling Water Under Atmosphere Pressure", J. of Japan Society of Mech. Eng., Vol. 37, 1934, pp. 367-374.
- F. P. Incropera and D. P. Dewitt, "Fundamentals of Heat and Mass Transfer", Wiley, 2003, pp. 674-675.
- Y. Katto and C. Kurata, "Critical Heat Flux of Saturated Convective Boiling on Uniformly Heated Plates in a Parallel Flow", Int. J. of Multiphase Flow, Vol. 6, 1980, pp. 575-582. https://doi.org/10.1016/0301-9322(80)90052-X
- M. Monde, K. Kitajima, T. Inoue and Y. Mitsutaka, "Critical Heat Flux in a Convection Subcooled Boiling with an Imping Jet", ASME J. Heat Transfer, Vol. 7, 1994, pp. 542-518.
- I. Mudawar and K. A. Estes, "Optimizing and Predicting CHF in Spray cooling of Square Surface", ASME J. Heat Transfer, Vol. 118, 1996, pp. 672-679. https://doi.org/10.1115/1.2822685
- Y. C. Kim, "Effect of Droplet Flow Rate on Boiling Curve in Spray Cooling," Trans. of the KSME(B), Vol. 42-3, 2018, pp. 161-1696.
- J. V. Beck, "Nonlinear Estimation Applied to the Nonlinear Inverse Heat Conduction Problem", Int. J. Heat & Mass Transfer, Vol. 13, 1970, pp. 703-716. https://doi.org/10.1016/0017-9310(70)90044-X
- Y. C. Kim, "Measurement of Critical Heat Flux Using the Transient Inverse Heat Conduction Method in Spray Cooling", Trans. of the KSME(B), Vol. 40-10, 2016, pp. 938-944.
- N. Zuber, 1958, "On the Stability of Boiling Heat Transfer", Trans. of ASME, Vol. 80, pp. 711.