DOI QR코드

DOI QR Code

Dynamic response of post-tensioned rocking wall-moment frames under near-fault ground excitation

  • Feng, Ruoyu (School of Aerospace Engineering, Tsinghua University) ;
  • Chen, Ying (School of Civil Engineering, Shandong University) ;
  • Cui, Guozhi (School of Civil Engineering, Shandong University)
  • Received : 2018.01.21
  • Accepted : 2018.06.03
  • Published : 2018.09.25

Abstract

The dynamic responses of a rocking wall-moment frame (RWMF) with a post-tensioned cable are investigated. The nonlinear equations of motions are developed, which can be categorized as a single-degree-of-freedom (SDOF) model. The model is validated through comparison of the rocking response of the rigid rocking wall (RRW) and displacement of the moment frame (MF) against that obtained from Finite Element analysis when subjected ground motion excitation. A comprehensive parametric analysis is carried out to determine the seismic performance factors of the RWMF systems under near-fault trigonometric pulse excitation. The horizontal displacement of the RWMF system is compared with that of MF structures without RRW, revealing the damping effect of the RRW. Frame displacement spectra excited by trigonometric pulses and recorded earthquake ground motions are constructed. The effects of pulse type, mass ratio, frame stiffness, and wall slenderness variations on the displacement spectra are presented. The paper shows that the coupling with a RRW has mixed results on suppressing the maximum displacement response of the frame.

Keywords

Acknowledgement

Supported by : Chinese National Natural Science Foundation

References

  1. Ajrab, J.J. (2000), "Rocking wall-frame structures with supplemental damping devices", MS Thesis, University at Buffalo, the State University of New York, Buffalo.
  2. Ajrab, J.J., Pekcan, G. and Mander, J.B. (2004), "Rocking wall-frame structures with supplemental tendon systems", ASCE J. Struct. Eng., 130(6), 895-903. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:6(895)
  3. Aslam, M., Goddon, W.G. and Scalise, D.T. (1980), "Earthquake rocking response of rigid bodies", J. Struct. Div., ASCE, 106(2), 377-392.
  4. Barthes, C.B. (2012), "Design of earthquake resistant bridges using rocking columns", Ph.D. Dissertation, University of California, Berkeley.
  5. Chopra, A.K. (2017) Dynamics of Structures: Theory and Applications to Earthquake Engineering, 5th Edition, Prentice Hall, Englewood Cliffs, New Jersey,
  6. Costa, A. (2012), "Seismic assessment of the out-of-plane performance of traditional stone masonry walls", Ph.D Dissertation, University of Porto, Porto.
  7. Grigorian, C.E. and Grigorian, M. (2015), "Performance control and efficient design of rocking-wall moment frames", J. Struct. Eng., 142(2), 04015193.
  8. Housner, G.W. (1963), "The behavior of inverted pendulum structures during earthquakes", Bull. Seismol. Soc. Am., 53(2), 403-417.
  9. Hu, X. and Zhang, Y. (2012), "Seismic performance of reinforced concrete frames retrofitted with self-centering hybrid wall", Adv. Struct. Eng., 15(12), 2131-2143. https://doi.org/10.1260/1369-4332.15.12.2131
  10. Loo, W.Y., Quenneville, P. and Chouw, N. (2015), "A low damage and ductile rocking timber wall with passive energy dissipation devices", Earthq. Struct., 9(1), 127-143. https://doi.org/10.12989/eas.2015.9.1.127
  11. Makris, N. (2015), "Rigidity-plasticity-viscosity: can electrorheological dampers protect base-isolated structures from near-source ground motions", Earthq. Eng. Struct. Dyn., 26(5), 571-591. https://doi.org/10.1002/(SICI)1096-9845(199705)26:5<571::AID-EQE658>3.0.CO;2-6
  12. Makris, N. and Roussos Y. (2000), "Rocking response of rigid blocks under near-source ground motions", Geotechnique, 50(3), 243-262. https://doi.org/10.1680/geot.2000.50.3.243
  13. Makris, N., and Aghagholizadeh, M. (2017),"The dynamics of an elastic structure coupled with a rocking wall", Earthquake Engineering and Structural Dynamics, 46(6), 945-962. https://doi.org/10.1002/eqe.2838
  14. Makris, N.A. (2014), "Half-century of rocking isolation", Earthq. Struct., 7(6), 1187-1221. https://doi.org/10.12989/eas.2014.7.6.1187
  15. Prieto, F., Lourenco, P.B. and Oliveira, C. (2004), "Impulsive Dirac-delta forces in the rocking motion", Earthq. Eng. Struct. Dyn., 33(7), 839-857. https://doi.org/10.1002/eqe.381
  16. Qu, B., Sanchez-Zamora, F. and Pollino, M. (2014), "Mitigation of inter-story drift concentration in multi-story steel concentrically braced frames through implementation of rocking cores", Eng. Struct., 70(9), 208-217. https://doi.org/10.1016/j.engstruct.2014.03.032
  17. Qu, Z., Wada, A., Motoyui, S., Sakata, H. and Kishiki, S. (2014), "Pin-supported walls for enhancing the seismic performance of building structures", Earthq. Eng. Struct. Dyn., 41(14), 2075-2091. https://doi.org/10.1002/eqe.2175
  18. Sorrentino, L., AlShawa O.and Decanini L.D. (2011), "The relevance of energy damping in unreinforced masonry rocking mechanisms. Experimental and analytic investigations", Bull. Earthq. Eng., 9(5), 1617-1642. https://doi.org/10.1007/s10518-011-9291-1
  19. Wada, A., Qu, Z., Motoyui, S. and Sakata, H. (2011), "Seismic retrofit of existing SRC frames using rocking walls and steel dampers", Front. Arch. Civil Eng. China, 5(3), 259-266. https://doi.org/10.1007/s11709-011-0114-x
  20. Zhang, J. and Makris, N. (2000), "Rocking response of free-standing blocks under cycloidal pulses", J. Eng. Mech., 127(5), 473-483.

Cited by

  1. Seismic performance analysis of rocking wall TMDs structure based on shaking table test vol.21, pp.1, 2018, https://doi.org/10.12989/eas.2021.21.1.023