• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.192-194
• /
• 2002

We investigated the surface treatment of spectra fibers to improve tensile properties of spectra/vinylester composites. The spectra fibers were surface-treated using $\textrm{Ar}^{+}$ ion beam under oxygen environment. The treatment effect of spectra fibers on the tensile properties of spectra/vinylester composites was determined comparing the residual strength of surface-treated spectra/vinylester composites with that of untreated spectra/vinylester composites. It was found that the residual strength was improved 15% by the surface treatment of spectra fibers.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.151.2-151.2
• /
• 2011

IGRINS (Immersion GRating INfrared Spectrometer) will provide the spectra with high-resolution and an instantaneous spectral coverage of H and K band in NIR region. Therefore, it is expected that the wide coverage of wavelength would make a production of an extensive NIR high-resolution spectra of standard stars as a prior program of IGRINS. As a counter part of these NIR spectra, we have planned to obtain the high-resolution spectra of those standard stars in optical band. These optical high-resolution spectra would give us an opportunity to produce the library of high-resolution stellar spectra covering from optical to NIR band, and to confirm the method to determine the stellar parameters and chemical abundances from the NIR high-resolution spectra. Before using the NIR high-resolution spectra, we have tested the method to determine the stellar parameters by comparing between the observed spectra and the synthetic spectra in optical band. In order to make the synthetic spectra, we have used the Kurucz ATLAS9 model grids and the SYNTH code described by Fiorella Castelli (http://wwwuser.oat.ts.astro.it/castelli/). For the cross-check against the parameters that would be derived from the NIR spectra, the stellar parameters such as effective temperature and surface gravity were determined using the optical spectra of the solar-like stars, as preliminary results.

• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.2
• /
• pp.163-171
• /
• 1994

This experiment was conducted to investigate the discrimination of cigarette brands and the similarity between Korea and America cigarette brands by near infrared spectra. Statistical tools such as principal component analysis (PCA) and mahalanobis distance(M.D) were used. The discrimination rate of the Korea and the America cigarette brands, determined by position number which was calculated with PCA and M.D, was 94% and 87%, respectively. The spectra of the 10 America cigarette brands were selected by averaging 5 sample spectra for each brand and another 5 spectra for each brand were investigated to use as the sample spectra. Comparing the sample spectra with the selected spectra by M.D using 410-1090 nm, 1110-1850 nm and 1970-2490 nm wavelength, the discrimination rate which was determined by the closest M.D between the sample and the selected spectra was 100% when each spectra was investigated on the same time. But the discrimination rate decreased 50% when the sample and the selected spectra were investigated on the different time. Excluding 1970-2490 nm wavelength, the discrimination rate increased up to 90% when the sample and the selected spectra were investigated on the different time. Comparing the spectra of Korea cigarette brands with those of America cigarette brands by M.D using only 410-1090 nm and 1110-1850 nm wavelength, the spectra of Expo(G) was similar to Winston, Vantage(U.L) and Benson & hedges(M.), the spectra of Hanaro(D) was similar to Carrel, Winston(L), Vantage(U.L), \Vantage and Carrel(L), the spectra of Hanaro(L) was similar to Winston(L) , Carton, Vantage and Carmel(L) and the spectra of Pinetree was similar to Kent, Kool, Kent(G.L), Merit and Benson & hedges(L), respectively. Key Words : NIRS, cigarette brands discrimination

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.782-785
• /
• 1997

In this study, the spectra was surface-treated using $Ar^+$ ion beam to improve the tensile property of spectra/vinylester composites. The effect of surface treatment on the tensile property of spectra/vinylester composites was investigated comparing tensile strength and stiffness of surface-treated spectra/vinylester composites with those of untreated spectra/vinylester composites. The results showed that the tensile strength and stiffness of surface-treated s spectra/vinylester composites were 12% and 22% higher than those of untreated spectra/vinylester composites.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.4
• /
• pp.206-210
• /
• 2002

The use of Spectra fibers as fiber cloth is increasing because of their excellent impact resistance. However, a major limitation on the use of Spectra fibers is a chemical inertness. In this Study, Spectra fibers were surface-treated using Ar$^{+}$ ion beam under oxygen environment to improve the tensile property of Spectra/vinylester composites. The effect of surface treatment of Spectra fibers on the tensile property of Spectra/vinylester composites was determined from tensile tests using Spectra/vinylester composite specimens with and without a hole. It was found that the tensile stiffness and strength of surface-treated case were 22% and 17% higher than those of untreated case for specimens with no hole. The maximum load of surface-treated case was about 15% higher than that of untreated case for specimens with a hole.

• Structural Engineering and Mechanics
• /
• v.69 no.3
• /
• pp.293-306
• /
• 2019

In current seismic design codes, various elastic design acceleration spectra are defined considering different seismological and soil characteristics and are widely used tool for calculation of seismic loads acting on structures. Response spectrum analyses directly use the elastic design acceleration spectra whereas time history analyses use acceleration records of earthquakes whose acceleration spectra fit the design spectra of seismic codes. Due to the fact that obtaining coherent structural response quantities with the seismic design code considerations is a desired circumstance in dynamic analyses, the response spectra of earthquake records used in time history analyses had better fit to the design acceleration spectra of seismic codes. This paper evaluates structural response distributions of multi-story reinforced concrete frames obtained from nonlinear time history analyses which are performed by using the scaled earthquake records compatible with various elastic design spectra. Time domain scaling procedure is used while processing the response spectrum of real accelerograms to fit the design acceleration spectra. The elastic acceleration design spectra of Turkish Seismic Design Code 2007, Uniform Building Code 1997 and Eurocode 8 are considered as target spectra in the scaling procedure. Soil classes in different seismic codes are appropriately matched up with each other according to $V_{S30}$ values. The maximum roof displacements and the total base shears of considered frame structures are determined from nonlinear time history analyses using the scaled earthquake records and the results are presented by graphs and tables. Coherent structural response quantities reflecting the influence of elastic design spectra of various seismic codes are obtained.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.89-94
• /
• 1998

Seasonal variation of attenuation coefficient spectra in Japan sea was extracted from underwater radiance/irradiance spectra observed by a moored buoy system developed by National Space Development Agency of Japan (NASDA). The buoy was deployed 9 months from August 31, 1996 to June 1, 1997. Throughout this period, it was collecting downward irradiance and upward radiance spectra under water at the depth of 1.5m and 6.5m everyday. The dairy averaged diffused attenuation coefficient spectra and underwater reflectance spectra were calculated. The results were compared with the absorption spectra of filtered samples obtained by validation cruises, which carried out 5 times during the moored period. Also, the natural fluorescence of chlorophyll a were extracted from the upward radiance spectra observed at 1.5m depth. The seasonal variation of the calculated attenuation coefficient spectra and the natural fluorescence were examined. The result shows a weak blooming of phytoplankton on November and a large blooming on April.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.153.1-153.1
• /
• 2011

For the stars cooler than the Sun, it is difficult to determine the stellar parameters and chemical abundances because of the strong molecular lines in the optical region. Therefore the NIR high-resolution spectra, such as those obtained by IGRINS would be a solution to determine the stellar parameters for late-type stars, such as M dwarfs. As using the NIR high-resolution spectra, we are expecting that it would be more reliable to compare observed spectra with synthetic spectra for the stellar parameters. In order to confirm the method by using high-resolution spectra in NIR band, it should be cross-checked against the stellar parameters from optical high-resolution spectra. We have derived the stellar parameters of M dwarfs using the synthetic spectra in the long wavelength region of the optical spectra (over 8000 $\bar{A}$), which is relatively less contaminated by molecular lines as well as telluric lines.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.3
• /
• pp.129-137
• /
• 2018

On November 15, 2017, Pohang earthquake occurred. Its local magnitude was announced to be $M_L=5.4$ by Korea Meteorological Administration (KMA). Ground motion data recorded at KMA stations were obtained from their data bases. From the data, horizontal and vertical response spectra, and V/H ratio were calculated. The horizontal spectra were defined as GMRotI50 spectra. From the statistical analysis of the GMRotI50 spectra, a mean plus one standard deviation spectrum in lognormal distribution is obtained. Regression analysis is performed on this curve to determine the shape of spectrum including transition periods. Applying the same procedure, the shape and transition periods of vertical spectrum were obtained. These results were compared with theKorean standard design spectra, which were developed from domestic and overseas intra-plate earthquake records, and Gyeongju earthquake response spectra. The response spectra of Pohang earthquake were found to be almost identical with the newly proposed design spectra. Even the V/H ratios showed good agreement. These results confirmed that the method adopted when developing the standard design spectra were valid and the developed design spectra were reliable.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.1
• /
• pp.1-14
• /
• 2018

In this study, we develop and propose damping correction factors for the Korean standard design spectra. The newly proposed Korean standard design spectra has been given only for 5% damping ratio. But in practice, engineers need design spectra for damping values other than 5%. To obtain design spectra for various damping values from the standard spectra, damping correction factors are derived. These factors modify the shape of design spectra in accordance with the damping ratio. Response spectra for various damping values are calculated from the earthquake records that had been used to calculate standard design spectra. They consist of 55 records from 18 earthquakes occurred in overseas intraplate regions and Korea. The regressed spectra for the damping values ranging from 0.5% to 50 % are compared with standard spectra at three regions acceleration, velocity and displacement sensitive regions. The regression analysis of these data rendered formula for damping correction factors. Finally, a single formula for damping correction factors is recommended that is valid for both horizontal and vertical design spectra and that is applicable to the entire range of periods. One thing to note that recommended damping correction factors is valid for the design spectrum of the rock grounds because the design spectra was developed based on the earthquake records of the rock ground.