1 |
Ajrab, J.J. (2000), "Rocking wall-frame structures with supplemental damping devices", MS Thesis, University at Buffalo, the State University of New York, Buffalo.
|
2 |
Ajrab, J.J., Pekcan, G. and Mander, J.B. (2004), "Rocking wall-frame structures with supplemental tendon systems", ASCE J. Struct. Eng., 130(6), 895-903.
DOI
|
3 |
Aslam, M., Goddon, W.G. and Scalise, D.T. (1980), "Earthquake rocking response of rigid bodies", J. Struct. Div., ASCE, 106(2), 377-392.
|
4 |
Barthes, C.B. (2012), "Design of earthquake resistant bridges using rocking columns", Ph.D. Dissertation, University of California, Berkeley.
|
5 |
Chopra, A.K. (2017) Dynamics of Structures: Theory and Applications to Earthquake Engineering, 5th Edition, Prentice Hall, Englewood Cliffs, New Jersey,
|
6 |
Costa, A. (2012), "Seismic assessment of the out-of-plane performance of traditional stone masonry walls", Ph.D Dissertation, University of Porto, Porto.
|
7 |
Grigorian, C.E. and Grigorian, M. (2015), "Performance control and efficient design of rocking-wall moment frames", J. Struct. Eng., 142(2), 04015193.
|
8 |
Housner, G.W. (1963), "The behavior of inverted pendulum structures during earthquakes", Bull. Seismol. Soc. Am., 53(2), 403-417.
|
9 |
Hu, X. and Zhang, Y. (2012), "Seismic performance of reinforced concrete frames retrofitted with self-centering hybrid wall", Adv. Struct. Eng., 15(12), 2131-2143.
DOI
|
10 |
Wada, A., Qu, Z., Motoyui, S. and Sakata, H. (2011), "Seismic retrofit of existing SRC frames using rocking walls and steel dampers", Front. Arch. Civil Eng. China, 5(3), 259-266.
DOI
|
11 |
Zhang, J. and Makris, N. (2000), "Rocking response of free-standing blocks under cycloidal pulses", J. Eng. Mech., 127(5), 473-483.
|
12 |
Sorrentino, L., AlShawa O.and Decanini L.D. (2011), "The relevance of energy damping in unreinforced masonry rocking mechanisms. Experimental and analytic investigations", Bull. Earthq. Eng., 9(5), 1617-1642.
DOI
|
13 |
Prieto, F., Lourenco, P.B. and Oliveira, C. (2004), "Impulsive Dirac-delta forces in the rocking motion", Earthq. Eng. Struct. Dyn., 33(7), 839-857.
DOI
|
14 |
Makris, N. (2015), "Rigidity-plasticity-viscosity: can electrorheological dampers protect base-isolated structures from near-source ground motions", Earthq. Eng. Struct. Dyn., 26(5), 571-591.
DOI
|
15 |
Loo, W.Y., Quenneville, P. and Chouw, N. (2015), "A low damage and ductile rocking timber wall with passive energy dissipation devices", Earthq. Struct., 9(1), 127-143.
DOI
|
16 |
Makris, N. and Roussos Y. (2000), "Rocking response of rigid blocks under near-source ground motions", Geotechnique, 50(3), 243-262.
DOI
|
17 |
Makris, N., and Aghagholizadeh, M. (2017),"The dynamics of an elastic structure coupled with a rocking wall", Earthquake Engineering and Structural Dynamics, 46(6), 945-962.
DOI
|
18 |
Makris, N.A. (2014), "Half-century of rocking isolation", Earthq. Struct., 7(6), 1187-1221.
DOI
|
19 |
Qu, B., Sanchez-Zamora, F. and Pollino, M. (2014), "Mitigation of inter-story drift concentration in multi-story steel concentrically braced frames through implementation of rocking cores", Eng. Struct., 70(9), 208-217.
DOI
|
20 |
Qu, Z., Wada, A., Motoyui, S., Sakata, H. and Kishiki, S. (2014), "Pin-supported walls for enhancing the seismic performance of building structures", Earthq. Eng. Struct. Dyn., 41(14), 2075-2091.
DOI
|