공업화학 (Applied Chemistry for Engineering)

  • 제29권4호
  • /
  • Pages.405-412
  • /
  • 2018
  • /
  • 1225-0112(pISSN)
  • /
  • 2288-4505(eISSN)
한국공업화학회 (The Korean Society of Industrial and Engineering Chemistry)
권호 표지
DOI QR코드

DOI QR Code

Dithiophosphate Group을 함유한 디올유도체의 합성 및 내마모성-말단 알킬기 및 몸체 알킬기의 탄소사슬에 따른 영향

Synthese and Anti-wear Properties of Diol Derivatives Containing Dithiophosphate Group-effect on Main Alkyl Chain and Side Alkyl Chain

  • 고경민 (한국화학연구원 환경자원연구센터) ;
  • 한혜림 (한국화학연구원 환경자원연구센터) ;
  • 김영운 (한국화학연구원 환경자원연구센터) ;
  • 강호철 (한국화학연구원 환경자원연구센터) ;
  • 정노희 (충북대학교 공업화학과)
  • Ko, Kyung-Min (Environment & Sustainable Resources Research Center, Korea Research Institute of Chemical Technology) ;
  • Han, Hye-Rim (Environment & Sustainable Resources Research Center, Korea Research Institute of Chemical Technology) ;
  • Kim, Young-Wun (Environment & Sustainable Resources Research Center, Korea Research Institute of Chemical Technology) ;
  • Kang, Ho-Cheol (Environment & Sustainable Resources Research Center, Korea Research Institute of Chemical Technology) ;
  • Jeong, Noh-Hee (Department of Engineering Chemistry, Chungbuk National University)
  • 투고 : 2018.02.22
  • 심사 : 2018.04.12
  • 발행 : 2018.08.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

알칸디올로부터 유래된 주사슬의 탄소수가 6, 9, 11인 bis[3-(dialkyloxylphosphorothionyl)thio-2-methylpropanyloxy]alkane (BAPA)를 합성하였으며, 이를 zinc dialkyl dithiophosphates (ZDDP)와 비교하여 마모억제성능을 살펴보았다. 탄소 주사슬의 길이에 따른 BAPA의 내마모성능을 확인하기 위하여 4-ball 시험을 하였다. 기유무게의 1% 농도로 첨가제를 넣고 WSD (wear scar diameter)를 측정하였고, 각 0.472, 0.459, 0.480 mm로 나타났다. 또한 BAPA 화합물 중 bis[methacryloyloxy]nonane (BMOO9)의 곁사슬인 dialkyl dithiophosphoric acid (DDP)의 탄소수를 4, 8, 12로 변화시켜 합성하여, 4-ball 시험을 하였다. 그 결과로 WSD의 값은 각각 0.537, 0.459, 0.531 mm로 측정되었다. 곁사슬이 짧으면 필름이 얇게 형성되고, 길면 필름형성을 방해하여 탄소수가 8개일 때의 값이 제일 좋게 나타났다. ZDDP의 경우 동일한 조건에서 WSD의 값이 0.563 mm로 측정되었고, 합성한 BAPA의 화합물이 마모억제용 첨가제로 더 우수한 성능을 갖는다는 것을 확인하였다.

Three types of bis[3-(dialkyloxylphosphorothionyl) thio-2-methylpropanyloxy]alkane (BAPA) drived from alkane diol were synthesized. The principal chain of each BAPA had a different carbon number, i.e., 6, 9, and 11. The three types of synthesized BAPA were compared to zinc dialkyl dithiophosphates (ZDDPs) in terms of abrasion resistance. A four-ball test was conducted to evaluate the anti-abrasion performance of the synthesized BAPA according to the length of the principal carbon chain. Each product was added to an additive at a concentration of 1% of the base oil weight, and the wear scar diameter (WSD) was measured as 0.472, 0.459, and 0.480 mm, respectively. Among the BAPA compounds, dialkyl dithiophosphoric acid (DDP), which is the side chain of bis[methacryloyloxy] nonane (BMOO9), was synthesized by varying the carbon number, i.e., 4, 8, and 12, and subsequently the 4-ball test was carried out. The WSD was determined as 0.537, 0.459, and 0.531 mm, respectively. As a result, it was found that when a side chain is short, a thin film is formed. In contrast, a long side chain hindered the formation of a film, and hence the best result was achieved when the carbon number was 8. As for the ZDDPs, the WSD was determined to be 0.563 mm, when measured under the same conditions. The measurements confirm that the synthesized BAPA compounds are superior to the ZDDPs as abrasion resistance additives.

키워드

참고문헌

  1. B. Kim, R. Mourhatch, and P. Aswath, Properties of tribofilms formed with ashless dithiophosphate and zinc dialkyl dithiophosphate under extreme pressure conditions, Wear, 268, 579-591 (2010). https://doi.org/10.1016/j.wear.2009.10.004
  2. A. Barnes, K. Bartle, and V. Thibon, A review of zinc dialkyldithiophosphates (ZDDPS): Characterization and role in the lubricating oil, Tribol. Int., 34, 389-395 (2001). https://doi.org/10.1016/S0301-679X(01)00028-7
  3. K. Holmberg, P. Andersson, and A. Erdemir, Global energy consumption due to friction in passenger cars, Tribol. Int., 47, 221-234 (2012). https://doi.org/10.1016/j.triboint.2011.11.022
  4. M. Nicholls, T. Do, P. Norton, M. Kasrai, and G. Bancroft, Review of the lubrication of metallic surfaces by zinc dialkyl-dithiophosphates, Tribol. Int., 38, 15-39 (2005). https://doi.org/10.1016/j.triboint.2004.05.009
  5. S. Boyde, Green lubricants. Environmental benefits and impacts of lubrication, Green Chem., 4, 293-307 (2002). https://doi.org/10.1039/b202272a
  6. H. Spikes, Low- and zero-sulphated ash, phosphorus and sulphur anti-wear additives for engine oils, Lubr. Sci., 20, 103-136 (2008). https://doi.org/10.1002/ls.57
  7. H. Spikes, Origins of the friction and wear properties of antiwear additives, Lubrication Sci., 18, 223-230 (2006). https://doi.org/10.1002/ls.19
  8. H. Spikes, The history and mechanisms of ZDDP, Tribol. Lett., 17, 469-489 (2004). https://doi.org/10.1023/B:TRIL.0000044495.26882.b5
  9. P. Nagajyoti, K. Lee, and T. Sreekanth, Heavy metals, occurrence and toxicity for plants: A review, Environ. Chem. Lett., 8, 199-216 (2010). https://doi.org/10.1007/s10311-010-0297-8
  10. T. Singh and C. Chandrasekharan, The effect of nitrogen and sulphur compounds on extreme pressure lubrication, Tribol. Int., 26, 245-250 (1993). https://doi.org/10.1016/0301-679X(93)90005-L
  11. T. Singh, R. Singh, V. Verma, and K. Nakayama, A study of N, O and S heterocyclic compounds as extreme pressure lubricant additives, Tribol. Int., 23, 41-46 (1990). https://doi.org/10.1016/0301-679X(90)90071-V
  12. J. Zhang, W Liu, and Q. Xue, Tribological properties of the film formed by 2-(n-dodecyldithio)-benzothiazole as additive in liquid paraffin, Wear, 236, 34-38 (1999). https://doi.org/10.1016/S0043-1648(99)00258-6
  13. J. Lara, T. Blunt, P. Kotvis, A. Riga, and W. Tysoe, Surface chemistry and extreme-pressure lubricant properties of dimethyl disulfide, J. Phys. Chem. B, 102, 1703-1709 (1998). https://doi.org/10.1021/jp980238y
  14. P. Kotvis, L. Huezo, and W. Tysoe, Surface chemistry of methylene chloride on iron: a model for chlorinated hydrocarbon lubricant additives, Langmuir, 9, 467-474 (1993). https://doi.org/10.1021/la00026a018
  15. S. Didziulis, An XPS study of the chemical interactions of the extreme pressure lubricant additive lead naphthenate with titanium and titanium compound surfaces, Langmuir, 11, 917-930 (1995). https://doi.org/10.1021/la00003a040
  16. J. McQueen, H. Gao, and E. Black, A. Gangopadhyay, R. Jensen, Friction and wear of tribofilms formed by zinc dialkyl dithiophosphate antiwear additive in low viscosity engine oils, Tribol. Int., 38, 289-297 (2005). https://doi.org/10.1016/j.triboint.2004.08.019
  17. K. Fan, J. Li, H. Ma, H. Wu, T. Ren, M. Kasrai, and G. Bancroft, Tribological characteristics of ashless dithiocarbamate derivatives and their combinations with ZDDP as additives in mineral oil, Tribol. Int., 41, 1226-1231 (2008). https://doi.org/10.1016/j.triboint.2008.03.010
  18. L. Yan, W. Yue, C. Wang, D. Wei, and B. Xu. Comparing tribological behaviors of sulfur- and phosphorus-free organomolybdenum additive with ZDDP and MoDTC, Tribol. Int., 53, 150-158 (2012). https://doi.org/10.1016/j.triboint.2012.04.002
  19. T. Katafuchi and N. Shimizu, Evaluation of the antiwear and friction reduction characteristics of mercaptocarboxylate derivatives as novel phosphorous-free additives, Tribol. Int., 40, 1017-1024 (2007). https://doi.org/10.1016/j.triboint.2006.09.005
  20. S. Chen and W. Liu, Oleic acid capped PbS nanoparticles: Synthesis, characterization and tribological properties, Mater. Chem. Phys., 98, 183-189 (2006). https://doi.org/10.1016/j.matchemphys.2005.09.043
  21. F. Shah, S. Glavatskih, E. Hoglund, M. Lindberg, and O. Antzutkin, Interfacial antiwear and physicochemical properties of alkylborate-dithiophosphates, ACS Appl. Mater. Interfaces, 3, 956-968 (2011). https://doi.org/10.1021/am101203t
  22. M. Kalam, H. Masjuki, M. Shahabuddin, and M. Mofijur, Tribological characteristics of amine phosphate and octylated/butylated diphenylamine additives infused bio-lubricant, Energy Educ. Sci. Technol. A, 30, 123-136 (2012).
  23. F. Gao, O. Furlong, P. Kotvis, and W. Tysoe, Reaction of tributyl phosphite with oxidized iron: Surface and tribological chemistry, Langmuir, 20, 7557-7568 (2004). https://doi.org/10.1021/la049438t
  24. B. Kim, J. Jiang, and P. Aswath, Mechanism of wear at extreme load and boundary conditions with ashless anti-wear additives: analysis of wear surfaces and wear debris, Wear, 270, 181-194 (2011). https://doi.org/10.1016/j.wear.2010.10.058
  25. R. Rastogi, J. Maurya, and V. Jaiswal, Low sulfur, phosphorus and metal free antiwear additives: synergistic action of salicylaldehyde N(4)-phenylthiosemicarbazones and its different derivatives with Vanlube 289 additives, Wear, 297, 849-859 (2013). https://doi.org/10.1016/j.wear.2012.10.003
  26. M. Sharma, V. Bansal, S. Ray, R. Sarin, D. Tuli, and A. Bhatnagar, Role of alkyl moieties in the antiwear and antioxidant performance of alkyl phosphorodithioates, Lubrication Sci., 15, 321-328 (2003). https://doi.org/10.1002/ls.3010150404
  27. D. Johnson and J. Hils, Phosphate esters, thiophosphate esters and metal thiophosphates as lubricant additives, Lubricants, 1, 132-148 (2013). https://doi.org/10.3390/lubricants1040132
  28. T. Jack, Addition product of diester of dithiophosphoric acid and maleic acid and its esters, and method of preparation, US Patent 2,578,652 (1950).