과제정보
연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP)
참고문헌
- Abe, F., "Progress in Creep-Resistant Steels for High Efficiency Coal-Fired Power Plants", Journal of Pressure Vessel Technology, Vol. 138, 2016, pp. 040804. https://doi.org/10.1115/1.4032372
- Shingledecker, J., "The Advanced Austenitic Stainless Steels Handbook: 347HFG, SUPER304H, HR3C"., EPRI, 2013.
-
Abe, F., "Research and Development of Heat-Resistant Materials for Advanced USC Power Plants with Steam Temperatures of
$700^{\circ}C$ and Above". Engineering, Vol. 1, 2015. pp. 211-224. https://doi.org/10.15302/J-ENG-2015031 - Eggler, G, "The effect of long-term creep on particle coarsening in tempered martensitic ferritic steels", Acta Metallurgica, vol, 37, 1989, pp. 3225-3234. https://doi.org/10.1016/0001-6160(89)90194-6
- Milović, L., et al., "Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures", Materials & Design, Vol. 46, 2013, pp. 660-667. https://doi.org/10.1016/j.matdes.2012.10.057
- Hald, J., "Microstructure and long-term creep properties of 9- 12% Cr steels", International Journal of Pressure Vessels and Piping, Vol. 85, 2008, pp. 30-37. https://doi.org/10.1016/j.ijpvp.2007.06.010
- Klotz, U.E., C. Solenthaler, and P.J. Uggowitzer, "Martensitic- austenitic 9-12% Cr steels-Alloy design, microstructural stability and mechanical properties". Materials Science and Engineering: A, Vol 476 2008, pp. 186-194. https://doi.org/10.1016/j.msea.2007.04.093
- Y.S. He, J.C. Chang, J.L. Dong and K. Shin, "Microstructural Evolution of X20CrMoV12.1 Steel Upon Long-Term On-Site Exposure in Power Plants", Advanced Science Letters, Vol. 4, 2011, pp. 1416-1423. https://doi.org/10.1166/asl.2011.1697
- Y.S. He, J.L. Dong, J.S. Juang and K. Shin, "An Improved nondestructive replication metallography method for investigation of the precipitates in Cr-Mo-V turbine steel", Surface and Interface Analysis, Vol. 44, 2012, pp. 1411-1414. https://doi.org/10.1002/sia.4958
- Hino, M, Y.S. He, K.J. Li, J.C. Chang and K. Shin, "Microstructural Evolution of X20CrMoV12.1 Steel upon Short-term Creep Rupture Test", Applied Microscopy, Vol. 43, 2013, pp. 164-172. https://doi.org/10.9729/AM.2013.43.4.164
-
Y.S. He, J.C. Chang, J.H. Lee and K. Shin, "Microstructural Evolution of Grade 91 Steel upon Heating at
$760-1000 ^{\circ}C$ ". Korean Journal of Materials Research, Vol. 25, 2015. Pp. 607-611. https://doi.org/10.3740/MRSK.2015.25.11.607 - H.S. Lee, J.S. Jung, D.S. Kim, K.B. Yoo, "Failure Analysis on welded joints of 347H austenitic boiler tubes", Engineering Failuer Analysis, Vol.57, 2015, pp 413-422. https://doi.org/10.1016/j.engfailanal.2015.08.024
- Fry, A., S. Osgerby, and M. Wright, "Oxidation of Alloys in Steam Environments - A Review". NPL Report. MATC (A) 90, 2002.
- Tan, L., X. Ren, and T.R. Allen, "Corrosion behavior of 9-12% Cr ferritic-martensitic steels in supercritical water. Corrosion Science", Vol. 52, 2010, pp. 1520-1528. https://doi.org/10.1016/j.corsci.2009.12.032
- Xia, Z.X., et al., "Improve oxidation resistance at high temperature by nanocrystalline surface layer". Scientific Reports, 13027, 2015.
- Hoelzer, D.T., B.A. Pint, and I.G. Wright, "A microstructural study of the oxide scale formation on ODS Fe-13Cr steel". Journal of Nuclear Materials, Vol. 283-287, 2000, pp. 1306-1310. https://doi.org/10.1016/S0022-3115(00)00248-8