청정기술 (Clean Technology)

  • 제24권2호
  • /
  • Pages.119-126
  • /
  • 2018
  • /
  • 1598-9712(pISSN)
  • /
  • 2288-0690(eISSN)
한국청정기술학회 (The Korean Society of Clean Technology)
권호 표지
DOI QR코드

DOI QR Code

Development of Treatment Process for Residual Coal from Biosolubilization

  • Rifella, Archi (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Shaur, Ahmad (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Chun, Dong Hyuk (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Kim, Sangdo (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Rhim, Young Joon (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Yoo, Jiho (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Choi, Hokyung (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Lim, Jeonghwan (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Lee, Sihyun (Clean Fuel Laboratory, Korea Institute of Energy Research) ;
  • Rhee, Youngwoo (Graduate School of Energy Science and Technology, Chungnam National University)
  • 투고 : 2017.11.27
  • 심사 : 2017.12.19
  • 발행 : 2018.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study introduced a treatment process that was developed to treat Indonesian low-rank coal with high-ash content, which has the same characteristics as residual coal from the biosolubilization process. The treatment process includes separation of ash, solid-liquid separation, pelletizing, and drying. To reduce the ash content, flotation was performed using 4-methyl-2-pentanol (MIBC) as frother, and kerosene, waste oil, and cashew nut shell liquid (CNSL) as collectors. The increasing amount of collector had an effect on combustible coal recovery and ash reduction. After flotation, a filter press, extruder, and an oven drier were used to make a dried coal pellet. Then another coal pellet was made using asphalt as a binder. The compressive strength and friability of the coal pellets were tested and compared.

키워드

참고문헌

  1. Kim, G. Y., Rhee, Y.-W., Park, J. H., Shun, D., Bae, D.-H., Shin, J.-S., Ryu, H.-J., and Park, J., "Drying Characteristics of High Moisture Low Rank Coal using Steam Fuidized-bed Dryer," Clean Technol., 20(3), 321-329 (2014). https://doi.org/10.7464/ksct.2014.20.3.321
  2. World Coal Association, "Coal Facts 2014," 2014. [Online]. Available: https://www.worldcoal.org/iea-publishes-latest-coalstatistics. (Accessed: Nov. 2017).
  3. Steynberg, A. P., and Nel, H. G., "Clean Coal Conversion Options Using Fischer-Tropsch Technology," Fuel, 83(6), 765-770 (2004). https://doi.org/10.1016/j.fuel.2003.09.023
  4. Wang, T., Wang, J., and Jin, Y., "Slurry Reactors for Gas-to-Liquid Processes: A Review," Ind. Eng. Chem. Res., 46(18), 5824-5847 (2007). https://doi.org/10.1021/ie070330t
  5. Ivanov, I. P., "Main Trends in the Biotechnological Processing of Coals: A Review," Solid Fuel Chem., 41(1), 3-10 (2007). https://doi.org/10.3103/S0361521907010028
  6. Crawford, D. L., and Nielsen, E. P., "Biotransformation of Coal Substructure Model Compounds by Microbial Enzymes," Appl. Biochem. Biotechnol., 54, 223-231 (1995). https://doi.org/10.1007/BF02787921
  7. Catcheside, D. E. A., and Ralph, J. P., "Biological Processing of Coal," Appl. Microbiol. Biotechnol., 52(1), 16-24 (1999). https://doi.org/10.1007/s002530051482
  8. Gotz, G. K. E., and Fakoussa, R. M., "Fungal Biosolubilization of Rhenish Brown Coal Monitored by Curie-Point Pyrolysis/Gas Chromatography/Mass Spectrometry Using Tetraethylammonium Hydroxide," Appl. Microbiol. Biotechnol., 52(1), 41-48 (1999). https://doi.org/10.1007/s002530051484
  9. Jayanti, S., Maheswaran, K., and Saravanan, V., "Assessment of the Effect of High Ash Content in Pulverized Coal Combustion," Appl. Math. Model., 31(5), 934-953 (2007). https://doi.org/10.1016/j.apm.2006.03.022
  10. Kawatra, S. K., "Froth Flotation-Fundamental Principles Flotation System," https://en.wikipedia.org/wiki/Froth_flotation (Accessed: Nov. 2017).
  11. Tarleton, E. S., and Wakeman, R. J., Solid/Liquid Separation: Equipment Selection and Process Design, 1st ed., Elsevier, Oxford (1997).
  12. England, T., "The Economic Agglomeration of Fine Coal for Industrial and Commercial Use," Report for Coaltech 2020 (2000).
  13. Dohm, E. D., Ripepi, N. S., Luttrell, G. H., Karmis, M. E., and Adel, G. T., "Production and Characterization of Coal-Biomass Briquettes," Ph.D. Dissertation, Virginia Polytechnic Institute and State University, Virginia, USA (2013)
  14. Ozmak, M., and Aktas, Z., "Coal froth flotation: Effects of Reagent Adsorption on the Froth Structure," Energy and Fuels, 20(3), 1123-1130 (2006). https://doi.org/10.1021/ef0503358
  15. SNF Flomin, "Agents of reagents," Mining Magazine, 61-65 (2011).
  16. Han, C., "Coal Cleaning by Froth Flotation," Restrospective Theses and Dissertations, Iowa State University, Iowa, USA (1983).
  17. Sis, H., Ozbayoglu, G., and Sarikaya, M., "Comparison of Non-Ionic and Ionic Collectors in the Flotation of Coal Fines," Miner. Eng., 16(4), 399-401 (2003). https://doi.org/10.1016/S0892-6875(03)00047-5
  18. Polat, M., Polat, H., and Chander, S., "Physical and Chemical Interactions in Coal Flotation," Int. J. Miner. Process, 72, 199-213 (2003). https://doi.org/10.1016/S0301-7516(03)00099-1
  19. Zhang, Z., Wang, C., and Yan, K., "Adsorption of Collectors on Model Surface of Wiser Bituminous Coal: A Molecular Dynamics Simulation Study," Miner. Eng., 79, 31-39 (2015). https://doi.org/10.1016/j.mineng.2015.05.009
  20. Sonmez, I., AkdemIr, U., and Sahbudak, K., "Increasing Selectivity in Coal Flotation by Controlling Impeller Speed and Collector Concentration," Energy Sources, 27(4), 381-386 (2005). https://doi.org/10.1080/00908310490441782
  21. Khan, M. Z., Chun, D. H., Yoo, J., Kim, S. D., Rhim, Y. J., Choi, H. K., Lim, J., Lee, S., and Rifella, A., "Evaluation of the Effect of a Palm Acid Oil Coating on Upgrading Low Rank Coal," RSC Adv., 5(78), 63955-63963 (2015). https://doi.org/10.1039/C5RA08994H
  22. Jo, E. M., Chun, D. H., Park, I. S., Kim, S. D., Rhim, Y. J., Choi, H., Yoo, J., Lim, J. H., and Lee, S., "Characteristics of Coal Upgraded with Heavy Oils," Korean J. Chem. Eng., 31 (6), 981-985 (2014). https://doi.org/10.1007/s11814-014-0017-3