DOI QR코드

DOI QR Code

A Safety Study Using Impact and Fatigue Analyses According to Headrest Shape

헤드레스트의 형상에 따른 충돌 및 피로해석을 통한 안전성 연구

  • Han, Moonsik (Department of Mechanical and Automotive Engineering, Keimyung UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 한문식 (계명대학교 기계자동차공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2018.03.31
  • Accepted : 2018.04.14
  • Published : 2018.06.30

Abstract

The automotive headrest is intended to provide comfort, safety, convenience and durability to a vehicle's passengers and driver. In this study, impact and fatigue analyses were carried out for three headrest shape models-A, B and C. These models have the same material properties and the same force was applied to them. Impact and fatigue analyses demonstrated that all of the models obtained almost the exact same result values. This study found that all models had similar equivalent stress, deformation, fatigue life and main damage parts due to the fact that the shared same material properties. Better safety and fatigue life can be anticipated by changing the material of the headrest in order to secure more stable safety. An automotive headrest optimized for safety and durability is thought to have been developed through the impact and fatigue analyses of this study.

Keywords

References

  1. Cho, J. U., Min, B. S. and Han, M. S., "Basic Study on Impact Analysis of Automobile," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 1, pp. 64-70, 2009.
  2. Kim, D. E., Kim, J. H. and Kang, M. C., "Test and Evaluation based on Standard Regulation of USA Federal Automotive Safety of Assistant Driver"s Seat Airbag at Low Risk Deployment Passenger Airbag using Passenger Protection Wrap," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 61-67, 2016. https://doi.org/10.14775/ksmpe.2016.15.1.061
  3. Park, D. H. and Kwon, H. H., "Development of Automotive Seat Rail Parts for Improving Shape Fixability of Ultra High Strength Steel of 980MPa," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 137-144, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.137
  4. Han, M. S. and Cho, J. U., "Structural and Fatigue Analysis on Shock Absorber Mount of Automobile," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 125-133, 2012.
  5. Han, M. S. and Cho, J. U., "A Study on Durability of Under Bar at Car through Structural and Fatigue Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 2, pp. 44-50, 2015. https://doi.org/10.14775/ksmpe.2015.14.2.044
  6. Ye, S. D. and Min, B. H., "Development of the Injection Molded Ball Seat for Automobile Suspension," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 4, pp. 50-56, 2011.
  7. Han, M. S. and Cho, J. U., "Structural Safety Analysis on Bicycle Suspension Seat Post," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 72-81, 2012.
  8. Han, M. S. and Cho, J. U., "Structural Analysis on Flange Coupling due to Change of Bolt Numbers," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 5, pp. 57-66, 2012.
  9. Lee, H. Y., Lim, J. Y. and Bom, H. T., "A Study on the Structural Analysis of Car Seat Frame," Annual Conference of KSAE, Vol. 2, pp. 170-176, 1997.
  10. Hwang, S. H., Lee, K. N., Park, S. D. and Pyun, J. K., "Driving Adaptive control System Development for Air-Bladder Seat," Journal of the Korea Society of Automotive Engineers, Vol. 4, pp. 2237-2244, 2007.
  11. Han, M. S. and Cho, J. U., "A Study on the Durability due to Fork Shape of Excavator Bucket," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 2, pp. 54-59, 2018.

Cited by

  1. Life Fatigue Prediction of an Accumulator Composed of Bladder and Housing vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.058