Fig. 1. Schematics of a chevron plate.
Fig. 2. Schematics and image of the experimental facility.
Fig. 3. Energy balance between hot and cold side capacity.
Fig. 4. Heat transfer capacity and overall heat transfer coefficient with flow rate of hot side.
Fig. 5. Heat transfer capacity and overall heat transfer coefficient with the inlet temperature of the hot side.
Fig. 6. Pressure drop with the flow rate of the hot side.
Fig. 7. Comparison of pressure drop between the hot and cold side.
Table 1. Specifications of the welded heat exchanger
Table 2. Specifications of the welded heat exchanger
참고문헌
- Luan, H. B., Kuang, J. P., Cao, Z., Wu, Z., Tao, W. Q., and Sunden, B., 2017, CFD analysis of two types of welded plate heat exchangers. Numerical Heat Transfer, Part A: Applications, Vol. 71, No. 3, pp. 250-269. https://doi.org/10.1080/10407782.2016.1264761
- Khan, T. S., Khan, M. S., Chyu, M. C., and Ayub, Z. H,. 2010, Experimental investigation of single phase convective heat transfer coefficient in a corrugated plate heat exchanger for multiple plate configurations. Applied Thermal Engineering, Vol. 30, No. 8-9, pp. 1058-1065. https://doi.org/10.1016/j.applthermaleng.2010.01.021
- Yang, J., Jacobi, A., and Liu, W., 2017, Heat transfer correlations for single-phase flow in plate heat exchangers based on experimental data. Applied Thermal Engineering, Vol. 113, pp. 1547-1557. https://doi.org/10.1016/j.applthermaleng.2016.10.147
- Chung, H. J., Kang, H., Kim, Y. C., Lee, K. J., Lee, D. K., Lee, W. H., and Shine, W. S., 2018, An Experimental Study on the Heat Transfer and Pressure Drop Characteristics of Ethylene-Glycol Water in a Plate Heat Exchanger, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 30, No. 8, pp. 358-365. https://doi.org/10.6110/KJACR.2018.30.8.358
- Muley, A., and Manglik, R. M., 2000, Enhanced thermal-hydraulic performance optimization of chevron plate heat exchangers. International Journal of Heat Exchangers, Vol. 1, No. 1 pp. 3-18.
- Ahn, H. J., Lee, S. H., Hur, N. K., Park, H. J., and Ryu, H. S., 2010. A numerical simulation of flow and heat transfer in a dimple-type plate heat exchanger. Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 22, No. 3, pp. 149-155.
- Luan, Z. J., Zhang, G. M., Tian, M. C., and Fan, M. X., 2008. Flow resistance and heat transfer characteristics of a new-type plate heat exchanger. Journal of Hydrodynamics, Vol. 20, No. 4, pp. 524-529. https://doi.org/10.1016/S1001-6058(08)60089-X
- Zhang, Y., Jiang, C., Yang, Z., Zhang, Y., and Bai, B., 2016. Numerical study on heat transfer enhancement in capsule type plate heat exchangers. Applied Thermal Engineering, Vol. 108, pp. 1237-1242. https://doi.org/10.1016/j.applthermaleng.2016.08.033
- Kumar, B., and Singh, S. N., 2017, Study of pressure drop in single pass U-type plate heat exchanger. Experimental Thermal and Fluid Science, Vol. 87, pp. 40-49. https://doi.org/10.1016/j.expthermflusci.2017.04.028
- Zhicheng, Y., Lijun, W., Zhaokuo, Y., and Haowen, L., 2017. Shape optimization of welded plate heat exchangers based on grey correlation theory. Applied Thermal Engineering, Vol. 123, pp. 761-769. https://doi.org/10.1016/j.applthermaleng.2017.05.005
- ANSI/AHRI Standard 401(SI), Performance Rating of Liquid to Liquid Heat Exchanger, 2015.