한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제17권2호
  • /
  • Pages.60-67
  • /
  • 2018
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

양계장용 로터리 관리기 개발에 관한 연구

Development of Rotary Cultivator for Poultry Farm

  • 투고 : 2018.02.20
  • 심사 : 2018.03.04
  • 발행 : 2018.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, environment-friendly cultivation technology is popular. A cultivator is useful for turning over the stall bedding in a poultry farm. In this study, a rotary-based cultivator with a rechargeable battery was developed for eco-friendly management of broiler chickens. From the results of the test run, the clustered stall bedding was approximately divided into up and down layers. Through experimental evaluation, the working width was more than 60 cm, and the noise was less than 80 dB. The output of the motor was 400 W, and the speed of rotation was 3000 rpm. Electric battery type cultivators are expected to be widely used in the livestock industry.

키워드

참고문헌

  1. Ahlers, C., Alders, R. G., Bagnol, B., Cambaza, A. B., Harun, M., Mgomezulu, R., Msami, H., Pym, B., Wegener, P., Wethli, E., and Young, M., Improving village chicken production: a manual for field workers and trainers, ACIAR, pp. 5-154, 2009.
  2. Barnett, J. L. and Glatz, P. C., Developing and implementing a welfare audit in the Australian chicken meat industry, CABI, pp. 231-240, 2004.
  3. Glatz, P. and Pym, R., Poultry Development Review, Food and Agriculture Organization of The United Nations., pp. 2-120, 2013.
  4. Riber, A. B., Weerd, H. A. van de, Jong, I. C. de and Steenfeldt, S., "Review of environmental enrichment for broiler chickens", Poultry Science Association, Vol. 97, No. 2, pp. 378-396, 2017.
  5. Kim, W. M., "Studies on the multi-biofunctional microorganism for the eco-friendly and non-antibiotic chicken production," A Thesis for a Master degree, Paichai University, Republic of Korea, 2015.
  6. Kwon, T. H., Kim, J. Y., Lee, C. G., Kang, T. G., Lee, B. M. and Rhee, J. Y., "A study on rotary weeding blade installation angle for reduction of hand vibration in working type cultivator", Journal of Biosystems Engineering, Vol. 39, No. 1, pp. 11-20, 2014. https://doi.org/10.5307/JBE.2014.39.1.011
  7. Kwon, T. H., Ashtiani-Araghi, A., Lee, C., Kang, T. G., Lee, B. M., & Rhee, J. Y., "Evaluation of a crank-type walking cultivator for upland farming", Journal of Biosystems Engineering, Vol. 39, No. 1, pp. 1-10, 2014. https://doi.org/10.5307/JBE.2014.39.1.001
  8. Kwon, O. J., Kim, H. C., Kim, T. W., Kim, T. H., Jeong, J. H., Hawang, S. Y., Lee, J. G., Ban, G. H. and Ha, Y. S., "Design of cultivator attached lifter with combined carrier", J. Korea Soc. Agricultural Machinery, Vol. 21, No. 2, pp. 74, 2016.
  9. Kim, T. H., Jang, J. H., Lee, D. G., Kim, L. S. and Lyu, S. K., "Study on Optimal Design and Analysis of Worm Gear Reducer for High Place Operation Car", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 98-103, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.098
  10. Kim, S. H. and Kim, H. J., "Development of High Speed mid-Mower for Tractor (II)", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 5, pp. 80-85, 2016. https://doi.org/10.14775/ksmpe.2016.15.5.080