Steel and Composite Structures

  • 제26권6호
  • /
  • Pages.771-791
  • /
  • 2018
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Low velocity impact response and dynamic stresses of thick high order laminated composite truncated sandwich conical shell based on a new TDOF spring-mass-damper model considering structural damping

  • Azizi, A. (Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University) ;
  • Khalili, S.M.R. (Faculty of Mechanical Engineering, K.N. Toosi University of Technology) ;
  • Fard, K. Malekzadeh (Malek Ashtar University of Technology, Department of Mechanical Engineering)
  • 투고 : 2017.04.18
  • 심사 : 2018.01.11
  • 발행 : 2018.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.

키워드

참고문헌

  1. Abrate, S. (1991), "Impact on laminated composite materials", Appl. Mech. Rev., 44(4), 155-190. https://doi.org/10.1115/1.3119500
  2. Abrate, S. (1997), "Localized impact on sandwich structures with laminated facings", Appl. Mech. Rev, 50(2), 69-82. https://doi.org/10.1115/1.3101689
  3. Abrate, S. (2005), Impact on Composite Structures, Cambridge University Press.
  4. Allen, H.G. (2013), Analysis and Design of Structural Sandwich Panels: The Commonwealth and International Library: Structures and Solid Body Mechanics Division, Elsevier.
  5. Ambur, D.R. and Cruz, J. (1995), "Low-speed impact response characteristics of composite sandwich panels", AIAA J., 95, 1-14.
  6. Anderson, T.A. (2005), "An investigation of SDOF models for large mass impact on sandwich composites", Compos. Part B: Eng., 36(2), 135-142. https://doi.org/10.1016/j.compositesb.2004.05.002
  7. Assarar, M., El Mahi, A. and Berthelot, J.M. (2009), "Damping analysis of sandwich composite materials", J. Compos. Mat., 43(13), 1461-1485. https://doi.org/10.1177/0021998308105863
  8. Bandyopadhyay, T., Karmakar, A. and Kishimoto, K. (2016), "Transient response of delaminated composite conical shells due to multiple low velocity impacts in hygrothermal environment", Compos. Struct., 143, 202-219. https://doi.org/10.1016/j.compstruct.2016.02.006
  9. Bardell, N.S., Langley, R.S., Dunsdon, J.M. and Aglietti, G.S. (1999), "An h-p finite element vibration analysis of open conical sandwich panels and conical sandwich frusta", J. Sound Vib., 226(2), 345-377. https://doi.org/10.1006/jsvi.1999.2301
  10. Bellman, R. (Ed.), (1970), Methods of Nonlinear Analysis, Elsevier.
  11. Bhuiyan, M.A., Hosur, M.V. and Jeelani, S. (2009), "Low-velocity impact response of sandwich composites with nanophased foam core and biaxial (${\pm}45^{\circ}$) braided face sheets", Compos. Part B: Eng., 40(6), 561-571. https://doi.org/10.1016/j.compositesb.2009.03.010
  12. Chai, G.B. and Zhu, S. (2011), "A review of low-velocity impact on sandwich structures", Proceed. Institut. Mech. Eng., Part L: J. Mat. Des. Appl., 225(4), 207-230. https://doi.org/10.1177/1464420711409985
  13. Cheng, X., Zhao, W., Liu, Sh., Xu, Y. and Bao, J. (2014), "Damage of scarf-repaired composite laminates subjected to low-velocity impacts", Steel Compos. Struct., Int. J., 17(2), 199-213. https://doi.org/10.12989/scs.2014.17.2.199
  14. Dey, S. and Karmakar, A. (2014), "Time dependent response of low velocity impact induced composite conical shells under multiple delamination", Mech. Time-Dep. Mat., 18(1), 55-79. https://doi.org/10.1007/s11043-013-9214-4
  15. Dung, D.V., Hoa, L.K., Thuyet, B.T. and Nga, N.T. (2016), "Buckling analysis of functionally graded material (FGM) sandwich truncated conical shells reinforced by FGM stiffeners filled inside by elastic foundations", Appl. Math. Mech., 37(7), 879-902. https://doi.org/10.1007/s10483-016-2097-9
  16. Fatt, M.S.H. and Park, K.S. (2001), "Dynamic models for lowvelocity impact damage of composite sandwich panels-Part A: Deformation", Compos. Struct., 52(3), 335-351. https://doi.org/10.1016/S0263-8223(01)00026-5
  17. Feli, S., Khodadadian, S. and Safari, M. (2016), "A modified new analytical model for velocity impact response of circular composite sandwich panels", J. Sandw. Struct. Mat., 18(5), 552-578. https://doi.org/10.1177/1099636216648489
  18. Foo, C.C., Chai, G.B. and Seah, L.K. (2008), "A model to predict low-velocity impact response and damage in sandwich composites", Compos. Sci. Tech., 68(6), 1348-1356. https://doi.org/10.1016/j.compscitech.2007.12.007
  19. Frostig, Y. and Thomsen, O.T. (2004), "High-order free vibration of sandwich panels with a flexible core", Int. J. Solids Struct., 41(5-6), 1697-1724. https://doi.org/10.1016/j.ijsolstr.2003.09.051
  20. Garg, A.K., Khare, R.K. and Kant, T. (2006), "Higher-order closed-form solutions for free vibration of laminated composite and sandwich shells", J. Sandw. Struct. Mat., 8(3), 205-235. https://doi.org/10.1177/1099636206062569
  21. Ghorbanpour Arani, A., Kolahchi, R. and Zarei, M.Sh. (2015), "Visco-surface-nonlocal piezoelasticity effects on nonlinear dynamicstability of graphene sheets integrated with ZnO sensors and actuatorsusing refined zigzag theory", Compos. Struct., 132, 506-526. https://doi.org/10.1016/j.compstruct.2015.05.065
  22. Gong, S.W., Toh, S.L. and Shim, V.P.W. (1994), "The elastic response of orthotropic laminated cylindrical shells to lowvelocity impact", Compos. Eng., 4(2), 247-266. https://doi.org/10.1016/0961-9526(94)90030-2
  23. Gong, S.W. and Lam, K.Y. (2000), "Effects of structural damping and stiffness on impact response of layered structure", AIAA J., 38(9), 1730-1735. https://doi.org/10.2514/2.1161
  24. Hassan, M.Z. and Cantwell, W.J. (2012), "The influence of core properties on the perforation resistance of sandwich structures-An experimental study", Compos. Part B: Eng., 43(8), 3231-3238. https://doi.org/10.1016/j.compositesb.2012.03.012
  25. Hiel, C. and Ishai, O. (1992), "Design of highly damage-tolerant sandwich panels", Proceedings of the 37th International SAMPE Symposium and Exhibition, Anaheim, CA, USA, March, pp. 1228-1242.
  26. Hoo Fatt, M.S. and Park, K.S. (2001), "Dynamic models for lowvelocity impact damage of composite sandwich panels-Part A: deformation", J. Compos. Struct., 52(3-4), 335-351. https://doi.org/10.1016/S0263-8223(01)00026-5
  27. Horrigan, D.P.W., Aitken, R.R. and Moltschaniwskyj, G. (2000), "Modelling of crushing due to impact in honeycomb sandwiches", J. Sandw. Struct. Mat., 2(2), 131-151. https://doi.org/10.1177/109963620000200203
  28. Khalili, M.R. (1992), "Analysis of the dynamic response of large orthotropic elastic plates to transverse impact and it's application to fibre-reinforced plates", Doctoral Dissertation.
  29. Khalili, M.R., Malekzadeh, K. and Mittal, R.K. (2007), "Effect of physical and geometrical parameters on transverse low-velocity impact response of sandwich panels with a transversely flexible core", Compos. Struct., 77(4), 430-443. https://doi.org/10.1016/j.compstruct.2005.07.016
  30. Khalili, S.M.R., Rahmani, O., MalekzadehFard, K. and Thomsen, O.T. (2014), "High-order modeling of circular cylindrical composite sandwich shells with a transversely compliant core subjected to low velocity impact", Mech. Advanc. Mat. Struct., 21(8), 680-695. https://doi.org/10.1080/15376494.2012.707297
  31. Kheirikhah, M.M., Khalili, S.M.R. and Malekzadeh Fard, K. (2012), "Biaxial buckling analysis of soft-core composite sandwich plates using improved high-order theory", Eur. J. Mech. A/Solids, 31(1), 54-66. https://doi.org/10.1016/j.euromechsol.2011.07.003
  32. Kolahchi, R. and Bidgoli, A.M. (2016), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech. -Engl. Ed., 37(2), 265-274. https://doi.org/10.1007/s10483-016-2030-8
  33. Kolahchi, R., Safari, M. and Esmailpour, M. (2016), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265.
  34. Leijten, J., Bersee, H.E., Bergsma, O.K. and Beukers, A. (2009), "Experimental study of the low-velocity impact behaviour of primary sandwich structures in aircraft", Compos. Part A: Appl. Sci. Manufact., 40(2), 164-175. https://doi.org/10.1016/j.compositesa.2008.10.019
  35. Malekzadeh, P. and Heydarpour, Y. (2013), "Free vibration analysis of rotating functionally graded truncated conical shells", Compos. Struct., 97, 176-188. https://doi.org/10.1016/j.compstruct.2012.09.047
  36. Malekzadeh, K., Khalili, M.R. and Mittal, R.K. (2006), "Analytical prediction of low-velocity impact response of composite sandwich panels using new TDOF spring-mass-damper model", J. Compos. Mat., 40(18), 1671-1689. https://doi.org/10.1177/0021998306060170
  37. Malekzadeh, K., Khalili, M.R. and Mittal, R.K. (2007), "Response of composite sandwich panels with transversely flexible core to low-velocity transverse impact: A new dynamic model", Int. J. Impact Eng., 34(3), 522-543. https://doi.org/10.1016/j.ijimpeng.2005.10.002
  38. Malekzadeh Fard, K.M. (2015), "Higher order static analysis of truncated conical sandwich panels with flexible cores", Steel Compos. Struct., Int. J., 19(6), 1333-1354. https://doi.org/10.12989/scs.2015.19.6.1333
  39. Malekzadeh Fard, K.M. and Livani, M. (2015), "New enhanced higher order free vibration analysis of thick truncated conical sandwich shells with flexible cores", Struct. Eng. Mech., Int. J., 55(4), 719-742. https://doi.org/10.12989/sem.2015.55.4.719
  40. Manes, A., Gilioli, A., Sbarufatti, C. and Giglio, M. (2013), "Experimental and numerical investigations of low velocity impact on sandwich panels", Compos. Struct., 99, 8-18. https://doi.org/10.1016/j.compstruct.2012.11.031
  41. Mittal, R.K. (1987), "A simplified analysis of the effect of transverse shear on the response of elastic plates to impact loading", Int. J. Solids Struct., 23(8), 1191-1203. https://doi.org/10.1016/0020-7683(87)90055-2
  42. Mittal, R.K. and Khalili, M.R. (1994), "Analysis of impact of a moving body on an orthotropic elastic plate", AIAA J., 32(4), 850-856. https://doi.org/10.2514/3.12063
  43. Morovat, F. (2016), "Analytical Solution for Buckling of Composite Sandwich Truncated Conical Shells subject to Combined External Pressure and Axial Compression Load", Int. J. Advanc. Des. Manufact. Tech., 8(4), 1-14.
  44. Nejad, M.Z., Jabbari, M. and Ghannad, M. (2015), "Elastic analysis of FGM rotating thick truncated conical shells with axially-varying properties under non-uniform pressure loading", Compos. Struct., 122, 561-569. https://doi.org/10.1016/j.compstruct.2014.12.028
  45. Nettles, A.T. and Hodge, A.J. (1990), "Impact testing of glass/phenolic honeycomb panels with graphite/epoxy facesheets", Proceedings of the 35th International SAMPE Symposium and Exhibition, Anaheim, CA, USA, April.
  46. Noor, A.K., Burton, W.S. and Bert, C.W. (1996), "Computational models for sandwich panels and shells", Appl. Mech. Rev., 49(3), 155-199. https://doi.org/10.1115/1.3101923
  47. Plantema, F.J. (1966), Sandwich Construction: The Bending and Buckling of Sandwich Beams, Plates, and Shells, Wiley.
  48. Reissner, E. (1953), "On a variational theorem for finite elastic deformations", J. Math. Phys., 32(2-3), 129-135. https://doi.org/10.1002/sapm1953321129
  49. Setoodeh, A.R., Tahani, M. and Selahi, E. (2012), "Transient dynamic and free vibration analysis of functionally graded truncated conical shells with non-uniform thickness subjected to mechanical shock loading", Compos. Part B: Eng., 43(5), 2161-2171. https://doi.org/10.1016/j.compositesb.2012.02.031
  50. Shivakumar, K.N., Elber, W. and Illg, W. (1985), "Prediction of impact force and duration due to low-velocity impact on circular composite laminates", J. Appl. Mech., 52(3), 674-680. https://doi.org/10.1115/1.3169120
  51. Sofiyev, A.H. (2011), "Non-linear buckling behavior of FGM truncated conical shells subjected to axial load", Int. J. Non-Linear Mech., 46(5), 711-719. https://doi.org/10.1016/j.ijnonlinmec.2011.02.003
  52. Sofiyev, A.H. (2014), "On the dynamic buckling of truncated conical shells with functionally graded coatings subject to a time dependent axial load in the large deformation", Compos. Part B: Eng., 58, 524-533. https://doi.org/10.1016/j.compositesb.2013.10.013
  53. Struk, R. (1984), "Non-linear stability problem of an open conical sandwich shell under external pressure and compression", Int. J. Non-linear Mech., 19(3), 217-233. https://doi.org/10.1016/0020-7462(84)90009-X
  54. Sun, C.T. and Chattopadhyay, S. (1975), "Dynamic response of anisotropic laminated plates under initial stress to impact of a mass", J. Appl. Mech., 42(3), 693-698. https://doi.org/10.1115/1.3423664
  55. Sun, C.T. and Juang, J.N. (1986), "Modeling global structural damping in trusses using simple continuum models", AIAA J., 24(1), 144-150. https://doi.org/10.2514/3.9234
  56. Sun, C. and Wu, C.L. (1991), "Low velocity impact of composite sandwich panels", AIAA paper, 91, 1123-1129.
  57. Tang, M.Q. and Xu, J.C. (2013), "Nonlinear dynamic buckling for truncated sandwich shallow conical shell structure subjected to pulse impact", Appl. Mech. Mat., 252, 93-97.
  58. Tong, L. (1994), "Free vibration of laminated conical shells including transverse shear deformation", Int. J. Solid Struct., 31(4), 443-456. https://doi.org/10.1016/0020-7683(94)90085-X
  59. Tornabene, F. and Viola, E. (2009), "Free vibration analysis of functionally graded panels and shells of revolution", Meccanica, 44(3), 255-281. https://doi.org/10.1007/s11012-008-9167-x
  60. Tornabene, F., Fantuzzi, N., Bacciocchi, M. and Viola, E. (2015), "Higher-order theories for the free vibrations of doubly-curved laminated panels with curvilinear reinforcing fibers by means of a local version of the GDQ method", Compos. Part B: Eng., 81, 196-230. https://doi.org/10.1016/j.compositesb.2015.07.012
  61. Vinson, J.R. (1999), The Behavior of Sandwich Structures of Isotropic and Composite Materials, CRC Press.
  62. Wang, J., Waas, A.M. and Wang, H. (2012), "Experimental Study on the Low-velocity Impact Behavior of Foam-core Sandwich Panels", Proceedings of the 53rd AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference 20th AIAA/ASME/AHS Adaptive Structures Conference 14th AIAA, p.1701.
  63. Wang, J., Waas, A.M. and Wang, H. (2013), "Experimental and numerical study on the low-velocity impact behavior of foamcore sandwich panels", Compos. Struct., 96, 298-311. https://doi.org/10.1016/j.compstruct.2012.09.002
  64. Wilkins, D.J., Bert, C.W. and Egle, D.M. (1970), "Free vibrations of orthotropic sandwich conical shells with various boundary conditions", J. Sound Vib., 13(2), 211-228. https://doi.org/10.1016/S0022-460X(70)81175-0
  65. Wu, H.Y.T. and Fu-Kuo, C. (1989), "Transient dynamic analysis of laminated composite plates subjected to transverse impact", Comput. Struct., 31(3), 453-466. https://doi.org/10.1016/0045-7949(89)90393-3
  66. Zenkert, D. (1995), An Introduction to Sandwich Construction, Engineering Materials Advisory Services.
  67. Zhang, T., Yan, Y., Li, J. and Luo, H. (2016), "Low-velocity impact of honeycomb sandwich composite plates", J. Reinforc. Plast. Compos., 35(1), 8-32. https://doi.org/10.1177/0731684415612573
  68. Zhou, D.W. and Stronge, W.J. (2006), "Low velocity impact denting of HSSA lightweight sandwich panel", Int. J. Mech. Sci., 48(10), 1031-1045. https://doi.org/10.1016/j.ijmecsci.2006.05.011