참고문헌
- ANSYS Inc, "ANSYS Theory Reference," SAS IP Inc. Houston, 2012.
- S. Ashforth-Frost and K. Jambunathan, "Velocity and Turbulence Characteristics of a Semiconfined Orthogonally Impinging Slot Jet," Vol. 14, No. 1, pp. 60-67, 1997. https://doi.org/10.1016/S0894-1777(96)00112-4
- J. M. Barata,, “Fountain Flows Produced by Multiple Impinging Jets in a Crossflow,” AIAA Journal, Vol. 34, No. 12, pp. 2523-2530, 1996. https://doi.org/10.2514/3.13434
- T. L. Bergman and F. P. Incropera, "Introduction to Heat Transfer," John Wiley & Sons, 2011.
- P. Caccavale, M. V. De Bonis, and G. Ruocco, "Conjugate Heat and Mass Transfer in Drying: A Modeling Review," Journal of Food Engineering, 176, pp. 28-35, 2016.
- G. Cao, M. Ruponen, R. Paavilainen, and J. Kurnitski, “Modelling and Simulation of the Near-Wall Velocity of a Turbulent Ceiling Attached Plane Jet After its Impingement with the Corner,” Building and Environment, Vol. 46, No. 2, pp. 489-500, 2011. https://doi.org/10.1016/j.buildenv.2010.08.012
- Y. M. Chung, K. H. Luo, and N. D. Sandham, “Numerical Study of Momentum and Heat Transfer in Unsteady Impinging Jets,” International Journal of Heat and Fluid Flow, Vol. 23, No. 5, pp. 592-600, 2002. https://doi.org/10.1016/S0142-727X(02)00155-8
- M. Coussirat, J. Van Beeck, M. Mestres, E. Egusguiza, J. M. Buchlin, and X. Escaler, “Computational Fluid Dynamics Modeling of Impinging Gas-Jet Systems: I. Assessment of Eddy Viscosity Models,” Journal of Fluids Engineering, Vol. 127, No. 4, pp. 691-703, 2005.
- L. L. Dong, C. W. Leung, and C. S. Cheung, “Heat Transfer and Wall Pressure Characteristics of a Twin Premixed Butane/Air Flame Jets,” International Journal of Heat and Mass Transfer, Vol. 47, No. 3, pp. 489-500, 2004. https://doi.org/10.1016/j.ijheatmasstransfer.2003.07.019
- S. Downs and E. H. James, "Jet Impingement Heat Transfer-A Literature Survey," In ASME, AIChE, and ANS, 24th National Heat Transfer Conference and Exhibition, Vol. 1, 1987.
- B. N. Hewakandamby, “A Numerical Study of Heat Transfer Performance of Oscillatory Impinging Jets,” International Journal of Heat and Mass Transfer, Vol. 52, No. 1, pp. 396-406, 2009. https://doi.org/10.1016/j.ijheatmasstransfer.2008.07.004
- K. Ichimiya, S. Takema, S. Morimoto, T. Kunugi, and N. Akino, “Movement of Impingement Heat Transfer by a Single Circular Jet with a Confined Wall,” International Journal of Heat and Mass Transfer, Vol. 44, No. 16, pp. 3095-3102, 2001. https://doi.org/10.1016/S0017-9310(00)00341-0
- K. Jambunathan, E. Lai, M. A. Moss, and B. L. Button, “A Review of Heat Transfer Data for Single Circular Jet Impingement,” International Journal of Heat and Fluid Flow, Vol. 13, No. 2, pp. 106-115, 1992. https://doi.org/10.1016/0142-727X(92)90017-4
- V. Katti and S. V. Prabhu, “Experimental Study and Theoretical Analysis of Local Heat Transfer Distribution between Smooth Flat Surface and Impinging Air Jet from a Circular Straight Pipe Nozzle,” International Journal of Heat and Mass Transfer, Vol. 51, No. 17, pp. 4480-4495, 2008. https://doi.org/10.1016/j.ijheatmasstransfer.2007.12.024
- J. Y. Koo, "Aero Propulsion Engine," Dong Myung Sa, pp. 211-293, 2013.
- F. K. Lu, and D. A. Terrier, "Performance Analysis of Short Takeoff and Vertical Landing Aircraft Nozzle in Hover," Journal of Propulsion and Power, Vol. 19, No. 4 pp. 715-717, 2003. https://doi.org/10.2514/2.6162
- A. V. Luikov, V. A. Aleksashenko, and A. A. Aleksashenko, “Analytical Methods of Solution of Conjugated Problems in Convective Heat Transfer,” International Journal of Heat and Mass Transfer, Vol. 14, No. 8, pp. 1047-1056, 1971. https://doi.org/10.1016/0017-9310(71)90203-1
- X. Liu, L. A. Gabour, and J. H. Lienhard, “Stagnation-Point Heat Transfer During Impingement of Laminar Liquid Jets: Analysis Including Surface Tension,” Journal of Heat Transfer, Vol. 115, No. 1, pp. 99-105, 1993. https://doi.org/10.1115/1.2910677
- X. Liu, J. H. Lienhard, and J. S. Lombara, “Convective Heat Transfer by Impingement of Circular Liquid Jets,” Journal of Heat Transfer, Vol. 113, No. 3, pp. 571-582, 1991. https://doi.org/10.1115/1.2910604
- R. Matsumoto, I. Ishihara, T. Yabe, K. Ikeda, S. Kikkawa, and M. Senda, "Impingement Heat Transfer Within Arrays of Circular Jets Including the Effect of Crossflow," Kansai Univ., Suita, Osaka(JP), 1999.
- S. Newman, "Foundations of Helicopter Flight," Elsevier, 1994.
- E. E. M. Olsson, L. M. Ahrne, and A. C. Tragardh, "Heat Transfer from a Slot Air Jet Impinging on a Circular Cylinder," Journal of Food Engineering, Vol. 63 No. 4, pp. 393-401, 2004. https://doi.org/10.1016/j.jfoodeng.2003.08.009
- A. Pattamatta, G. Singh, H. Mongia, and N. N. Number, "Assessment of Turbulence Models for Free and Confined Impinging Jet Flows," In 42nd AIAA Thermophysics Conference, pp. 27-30, 2011.
- M. M. Rahman, A. J. Bula, and J. E. Leland, “Conjugate Heat Transfer During Free Jet Impingement of a High Prandtl Number Fluid,” Numerical Heat Transfer: Part B: Fundamentals, Vol. 36, No. 2, pp. 139-162, 1999.
- F. Shum-Kivan, F. Duchaine, and L. Gicquel, "Large-Eddy Simulation and Conjugate Heat Transfer in a Round Impinging Jet," In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, pp. V05AT11A001-V05AT11A001.
- F. Xu, and M. S. Gadala, “Heat Transfer Behavior in the Impingement Zone under Circular Water Jet,” International Journal of Heat and Mass Transfer, Vol. 49, No. 21, pp. 3785-3799, 2006. https://doi.org/10.1016/j.ijheatmasstransfer.2006.03.034
- N. Zuckerman, and N. Lior, "Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling," Advances in Heat Transfer, 2006.