Browse > Article
http://dx.doi.org/10.9766/KIMST.2018.21.1.074

Numerical Estimation of Heat flux on the Deck Exposed to the High Temperature Impinging Jet of VTOL Vehicle  

Jang, Hosang (Department of Naval Architecture and Ocean Engineering, INHA University)
Hwang, Seyun (Research Institute of Industrial Science and Technology, INHA University)
Choi, Wonjun (Republic of Korea Navy)
Lee, Jang Hyun (Department of Naval Architecture and Ocean Engineering, INHA University)
Publication Information
Journal of the Korea Institute of Military Science and Technology / v.21, no.1, 2018 , pp. 74-85 More about this Journal
Abstract
This study has analyzed the convective heat transfer on the deck exposed to the high-temperature impingement exhausting from a VTOL vehicle. The heat flow of the impingement on the deck is modeled by the convection heat transfer. The convective heat flux generated by the hot impinging jet is investigated by using both convective heat transfer formulation and conjugate heat transfer formulation. Computational fluid dynamics(CFD) code was used to compute the heat flux distribution. The RANS equation and the k-e turbulence model were used to analyze the thermal flow of the impinging jet. The heat flux distribution near the stagnation zone obtained by the conjugate heat transfer analysis shows more reasonable than the convective heat transfer analysis.
Keywords
Nusselt Number; Convective Heat Transfer; Conjugate Heat Transfer; Vertical Take-Off Landing(VTOL); Thermal Flow;
Citations & Related Records
연도 인용수 순위
  • Reference
1 ANSYS Inc, "ANSYS Theory Reference," SAS IP Inc. Houston, 2012.
2 S. Ashforth-Frost and K. Jambunathan, "Velocity and Turbulence Characteristics of a Semiconfined Orthogonally Impinging Slot Jet," Vol. 14, No. 1, pp. 60-67, 1997.   DOI
3 J. M. Barata,, “Fountain Flows Produced by Multiple Impinging Jets in a Crossflow,” AIAA Journal, Vol. 34, No. 12, pp. 2523-2530, 1996.   DOI
4 T. L. Bergman and F. P. Incropera, "Introduction to Heat Transfer," John Wiley & Sons, 2011.
5 P. Caccavale, M. V. De Bonis, and G. Ruocco, "Conjugate Heat and Mass Transfer in Drying: A Modeling Review," Journal of Food Engineering, 176, pp. 28-35, 2016.
6 G. Cao, M. Ruponen, R. Paavilainen, and J. Kurnitski, “Modelling and Simulation of the Near-Wall Velocity of a Turbulent Ceiling Attached Plane Jet After its Impingement with the Corner,” Building and Environment, Vol. 46, No. 2, pp. 489-500, 2011.   DOI
7 Y. M. Chung, K. H. Luo, and N. D. Sandham, “Numerical Study of Momentum and Heat Transfer in Unsteady Impinging Jets,” International Journal of Heat and Fluid Flow, Vol. 23, No. 5, pp. 592-600, 2002.   DOI
8 M. Coussirat, J. Van Beeck, M. Mestres, E. Egusguiza, J. M. Buchlin, and X. Escaler, “Computational Fluid Dynamics Modeling of Impinging Gas-Jet Systems: I. Assessment of Eddy Viscosity Models,” Journal of Fluids Engineering, Vol. 127, No. 4, pp. 691-703, 2005.
9 L. L. Dong, C. W. Leung, and C. S. Cheung, “Heat Transfer and Wall Pressure Characteristics of a Twin Premixed Butane/Air Flame Jets,” International Journal of Heat and Mass Transfer, Vol. 47, No. 3, pp. 489-500, 2004.   DOI
10 S. Downs and E. H. James, "Jet Impingement Heat Transfer-A Literature Survey," In ASME, AIChE, and ANS, 24th National Heat Transfer Conference and Exhibition, Vol. 1, 1987.
11 V. Katti and S. V. Prabhu, “Experimental Study and Theoretical Analysis of Local Heat Transfer Distribution between Smooth Flat Surface and Impinging Air Jet from a Circular Straight Pipe Nozzle,” International Journal of Heat and Mass Transfer, Vol. 51, No. 17, pp. 4480-4495, 2008.   DOI
12 B. N. Hewakandamby, “A Numerical Study of Heat Transfer Performance of Oscillatory Impinging Jets,” International Journal of Heat and Mass Transfer, Vol. 52, No. 1, pp. 396-406, 2009.   DOI
13 K. Ichimiya, S. Takema, S. Morimoto, T. Kunugi, and N. Akino, “Movement of Impingement Heat Transfer by a Single Circular Jet with a Confined Wall,” International Journal of Heat and Mass Transfer, Vol. 44, No. 16, pp. 3095-3102, 2001.   DOI
14 K. Jambunathan, E. Lai, M. A. Moss, and B. L. Button, “A Review of Heat Transfer Data for Single Circular Jet Impingement,” International Journal of Heat and Fluid Flow, Vol. 13, No. 2, pp. 106-115, 1992.   DOI
15 J. Y. Koo, "Aero Propulsion Engine," Dong Myung Sa, pp. 211-293, 2013.
16 F. K. Lu, and D. A. Terrier, "Performance Analysis of Short Takeoff and Vertical Landing Aircraft Nozzle in Hover," Journal of Propulsion and Power, Vol. 19, No. 4 pp. 715-717, 2003.   DOI
17 A. V. Luikov, V. A. Aleksashenko, and A. A. Aleksashenko, “Analytical Methods of Solution of Conjugated Problems in Convective Heat Transfer,” International Journal of Heat and Mass Transfer, Vol. 14, No. 8, pp. 1047-1056, 1971.   DOI
18 X. Liu, L. A. Gabour, and J. H. Lienhard, “Stagnation-Point Heat Transfer During Impingement of Laminar Liquid Jets: Analysis Including Surface Tension,” Journal of Heat Transfer, Vol. 115, No. 1, pp. 99-105, 1993.   DOI
19 X. Liu, J. H. Lienhard, and J. S. Lombara, “Convective Heat Transfer by Impingement of Circular Liquid Jets,” Journal of Heat Transfer, Vol. 113, No. 3, pp. 571-582, 1991.   DOI
20 R. Matsumoto, I. Ishihara, T. Yabe, K. Ikeda, S. Kikkawa, and M. Senda, "Impingement Heat Transfer Within Arrays of Circular Jets Including the Effect of Crossflow," Kansai Univ., Suita, Osaka(JP), 1999.
21 S. Newman, "Foundations of Helicopter Flight," Elsevier, 1994.
22 E. E. M. Olsson, L. M. Ahrne, and A. C. Tragardh, "Heat Transfer from a Slot Air Jet Impinging on a Circular Cylinder," Journal of Food Engineering, Vol. 63 No. 4, pp. 393-401, 2004.   DOI
23 A. Pattamatta, G. Singh, H. Mongia, and N. N. Number, "Assessment of Turbulence Models for Free and Confined Impinging Jet Flows," In 42nd AIAA Thermophysics Conference, pp. 27-30, 2011.
24 M. M. Rahman, A. J. Bula, and J. E. Leland, “Conjugate Heat Transfer During Free Jet Impingement of a High Prandtl Number Fluid,” Numerical Heat Transfer: Part B: Fundamentals, Vol. 36, No. 2, pp. 139-162, 1999.
25 F. Shum-Kivan, F. Duchaine, and L. Gicquel, "Large-Eddy Simulation and Conjugate Heat Transfer in a Round Impinging Jet," In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, pp. V05AT11A001-V05AT11A001.
26 F. Xu, and M. S. Gadala, “Heat Transfer Behavior in the Impingement Zone under Circular Water Jet,” International Journal of Heat and Mass Transfer, Vol. 49, No. 21, pp. 3785-3799, 2006.   DOI
27 N. Zuckerman, and N. Lior, "Jet Impingement Heat Transfer: Physics, Correlations, and Numerical Modeling," Advances in Heat Transfer, 2006.